Re: [PATCH 2/2] drm/exynos: mixer: document YCbCr magic numbers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03.03.2017 14:40, Tobias Jakobi wrote:
> The output stage of the mixer uses YCbCr for the internal
> computations, which is the reason that some registers take
> YCbCr related data as input. In particular this applies
> to MXR_BG_COLOR{0,1,2} and MXR_CM_COEFF_{Y,CB,CR}.
>
> Document the formatting of the data which we write to
> these registers.
>
> While at it, unify wording of comments in the register header.
>
> Signed-off-by: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/exynos/exynos_mixer.c | 35 +++++++++++++++++++++++++++--------
>  drivers/gpu/drm/exynos/regs-mixer.h   |  7 +++++--
>  2 files changed, 32 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
> index 41d0c36..3b0b07d 100644
> --- a/drivers/gpu/drm/exynos/exynos_mixer.c
> +++ b/drivers/gpu/drm/exynos/exynos_mixer.c
> @@ -45,6 +45,20 @@
>  #define MIXER_WIN_NR		3
>  #define VP_DEFAULT_WIN		2
>  
> +/*
> + * Mixer color space conversion coefficient triplet.
> + * Used for CSC from RGB to YCbCr.
> + * Each coefficient is a 10-bit fixed point number with
> + * sign and no integer part, i.e.
Maybe it would be more clear to say in exclusive range (-1,1)
> + * [0:8] = fractional part (representing a value y = x / 2^9)
> + * [9] = sign
> + * Negative values are encoded with two's complement.
> + */
> +#define MXR_CSC_CT(a0, a1, a2) (((a0) << 20) | ((a1) << 10) | ((a2) << 0))

We can take advantage of the fact that floating point numbers are
allowed in compile time, aren't they?

#define MXR_CSC_C(x) ((int)((x) * 512) & 0x3ff)
#define MXR_CSC_CT(a0, a1, a2) ((MXR_CSC_C(a0) << 20) | (MXR_CSC_C(a1)
<< 10) | (MXR_CSC_C(a2) << 0))

and stop using magic hexadecimals, now we will use real coefficients.
    MXR_CSC_CT(0.1835,  0.6132,  0.0625)

> +
> +/* YCbCr value, used for mixer background color configuration. */
> +#define MXR_YCBCR_VAL(y, cb, cr) (((y) << 16) | ((cb) << 8) | ((cr) << 0))
> +
>  /* The pixelformats that are natively supported by the mixer. */
>  #define MXR_FORMAT_RGB565	4
>  #define MXR_FORMAT_ARGB1555	5
> @@ -391,13 +405,18 @@ static void mixer_cfg_rgb_fmt(struct mixer_context *ctx, unsigned int height)
>  	case 1080:
>  	default:
>  		val = MXR_CFG_RGB709_16_235;
> +		/*
> +		 * Configure the BT.709 CSC matrix M for full range RGB.
> +		 *     | 0.1835  0.6132  0.0625|
> +		 * M = |-0.1015 -0.3378  0.4394|
> +		 *     | 0.4394 -0.3984 -0.0390|

Out of curiosity, where did you take those values from, datasheet for
Exynos5422 has little bit different matrix.

Regards
Andrzej

> +		 */
>  		mixer_reg_write(res, MXR_CM_COEFF_Y,
> -				(1 << 30) | (94 << 20) | (314 << 10) |
> -				(32 << 0));
> +			MXR_CSC_CT(0x05E, 0x13A, 0x020) | MXR_CM_COEFF_RGB_FULL);

>  		mixer_reg_write(res, MXR_CM_COEFF_CB,
> -				(972 << 20) | (851 << 10) | (225 << 0));
> +			MXR_CSC_CT(0x3CC, 0x353, 0x0E1));
>  		mixer_reg_write(res, MXR_CM_COEFF_CR,
> -				(225 << 20) | (820 << 10) | (1004 << 0));
> +			MXR_CSC_CT(0x0E1, 0x334, 0x3EC));
>  		break;
>  	}
>  
> @@ -715,10 +734,10 @@ static void mixer_win_reset(struct mixer_context *ctx)
>  	/* reset default layer priority */
>  	mixer_reg_write(res, MXR_LAYER_CFG, 0);
>  
> -	/* setting background color */
> -	mixer_reg_write(res, MXR_BG_COLOR0, 0x008080);
> -	mixer_reg_write(res, MXR_BG_COLOR1, 0x008080);
> -	mixer_reg_write(res, MXR_BG_COLOR2, 0x008080);
> +	/* set all background colors to RGB (0,0,0) */
> +	mixer_reg_write(res, MXR_BG_COLOR0, MXR_YCBCR_VAL(0, 128, 128));
> +	mixer_reg_write(res, MXR_BG_COLOR1, MXR_YCBCR_VAL(0, 128, 128));
> +	mixer_reg_write(res, MXR_BG_COLOR2, MXR_YCBCR_VAL(0, 128, 128));
>  
>  	if (test_bit(MXR_BIT_VP_ENABLED, &ctx->flags)) {
>  		/* configuration of Video Processor Registers */
> diff --git a/drivers/gpu/drm/exynos/regs-mixer.h b/drivers/gpu/drm/exynos/regs-mixer.h
> index 7f22df5..c311f57 100644
> --- a/drivers/gpu/drm/exynos/regs-mixer.h
> +++ b/drivers/gpu/drm/exynos/regs-mixer.h
> @@ -140,11 +140,11 @@
>  #define MXR_INT_EN_VSYNC		(1 << 11)
>  #define MXR_INT_EN_ALL			(0x0f << 8)
>  
> -/* bit for MXR_INT_STATUS */
> +/* bits for MXR_INT_STATUS */
>  #define MXR_INT_CLEAR_VSYNC		(1 << 11)
>  #define MXR_INT_STATUS_VSYNC		(1 << 0)
>  
> -/* bit for MXR_LAYER_CFG */
> +/* bits for MXR_LAYER_CFG */
>  #define MXR_LAYER_CFG_GRP1_VAL(x)	MXR_MASK_VAL(x, 11, 8)
>  #define MXR_LAYER_CFG_GRP1_MASK		MXR_LAYER_CFG_GRP1_VAL(~0)
>  #define MXR_LAYER_CFG_GRP0_VAL(x)	MXR_MASK_VAL(x, 7, 4)
> @@ -152,5 +152,8 @@
>  #define MXR_LAYER_CFG_VP_VAL(x)		MXR_MASK_VAL(x, 3, 0)
>  #define MXR_LAYER_CFG_VP_MASK		MXR_LAYER_CFG_VP_VAL(~0)
>  
> +/* bits for MXR_CM_COEFF_Y */
> +#define MXR_CM_COEFF_RGB_FULL		(1 << 30)
> +
>  #endif /* SAMSUNG_REGS_MIXER_H */
>  


_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux