Signed-off-by: Jean-Francois Moine <moinejf@xxxxxxx>
---
.../bindings/display/sunxi/sun8i-de2.txt | 121 +++++++++++++++++++++
1 file changed, 121 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/sunxi/sun8i-de2.txt
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun8i-de2.txt b/Documentation/devicetree/bindings/display/sunxi/sun8i-de2.txt
new file mode 100644
index 0000000..edf38b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sunxi/sun8i-de2.txt
@@ -0,0 +1,121 @@
+Allwinner sun8i Display Engine 2 subsystem
+==========================================
+
+The Allwinner DE2 subsystem contains a display controller (DE2),
+one or two LCD controllers (Timing CONtrollers) and their external
+interfaces (encoders/connectors).
+
+ +-----------+
+ | DE2 |
+ | |
+ | +-------+ |
+ plane --->| | | +------+
+ | | mixer |---->| TCON |---> encoder ---> display
+ plane --->| | | +------+ connector device
+ | +-------+ |
+ | |
+ | +-------+ |
+ plane --->| | | +------+
+ | | mixer |---->| TCON |---> encoder ---> display
+ plane --->| | | +------+ connector device
+ | +-------+ |
+ +-----------+
+
+The DE2 contains a processor which mixes the input planes and creates
+the images which are sent to the TCONs.
+From the software point of vue, there are 2 independent real-time
+mixers, each one being statically associated to one TCON.
+
+The TCONs adjust the image format to the one of the display device.
+
+Display controller (DE2)
+========================
+
+Required properties:
+
+- compatible: value should be one of the following
+ "allwinner,sun8i-a83t-display-engine"
+ "allwinner,sun8i-h3-display-engine"
+
+- reg: base address and size of the I/O memory
+
+- clocks: must include clock specifiers corresponding to entries in the
+ clock-names property.
+
+- clock-names: must contain
+ "bus": bus gate
+ "clock": clock
+
+- resets: phandle to the reset of the device
+
+- ports: must contain a list of 2 phandles, indexed by mixer number,
+ and pointing to display interface ports of TCONs
+
+LCD controller (TCON)
+=====================
+
+Required properties:
+
+- compatible: should be
+ "allwinner,sun8i-a83t-tcon"
+
+- reg: base address and size of the I/O memory
+
+- clocks: must include clock specifiers corresponding to entries in the
+ clock-names property.
+
+- clock-names: must contain
+ "bus": bus gate
+ "clock": pixel clock
+
+- resets: phandle to the reset of the device
+
+- interrupts: interrupt number for the TCON
+
+- port: port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ de: de-controller@01000000 {
+ compatible = "allwinner,sun8i-h3-display-engine";
+ reg = <0x01000000 0x400000>;
+ clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>;
+ clock-names = "bus", "clock";
+ resets = <&ccu RST_BUS_DE>;
+ ports = <&tcon0_p>, <&tcon1_p>;
+ };
+
+ tcon0: lcd-controller@01c0c000 {
+ compatible = "allwinner,sun8i-a83t-tcon";
+ reg = <0x01c0c000 0x400>;
+ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+ clock-names = "bus", "clock";
+ resets = <&ccu RST_BUS_TCON0>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ tcon0_p: port {
+ tcon0_hdmi: endpoint {
+ remote-endpoint = <&hdmi_tcon0>;
+ };
+ };
+ };
+
+ /* not used */
+ tcon1: lcd-controller@01c0d000 {
+ compatible = "allwinner,sun8i-h3-tcon";
+ reg = <0x01c0d000 0x400>;
+ clocks = <&ccu CLK_BUS_TCON1>,
+ <&ccu CLK_TCON0>; /* no clock */
+ clock-names = "bus", "clock";
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ tcon1_p: port {
+ endpoint {
+ /* empty */
+ };
+ };
+ };
--
2.10.2
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
