Move the setting of the primary plane position into
armada_drm_primary_set() rather than the initialisation function.
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/armada/armada_crtc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/armada/armada_crtc.c b/drivers/gpu/drm/armada/armada_crtc.c
index 5fff7cada6f5..6d3b0edde8d7 100644
--- a/drivers/gpu/drm/armada/armada_crtc.c
+++ b/drivers/gpu/drm/armada/armada_crtc.c
@@ -532,13 +532,14 @@ static void armada_drm_primary_set(struct drm_crtc *crtc,
{
struct armada_plane_state *state = &drm_to_armada_plane(plane)->state;
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
- struct armada_regs regs[7];
+ struct armada_regs regs[8];
bool interlaced = dcrtc->interlaced;
unsigned i;
- uint32_t ctrl0;
+ u32 ctrl0;
i = armada_drm_crtc_calc_fb(plane->fb, x, y, regs, interlaced);
+ armada_reg_queue_set(regs, i, state->dst_yx, LCD_SPU_GRA_OVSA_HPXL_VLN);
armada_reg_queue_set(regs, i, state->src_hw, LCD_SPU_GRA_HPXL_VLN);
armada_reg_queue_set(regs, i, state->dst_hw, LCD_SPU_GZM_HPXL_VLN);
@@ -1191,7 +1192,6 @@ static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev,
CFG_PDWN32x32 | CFG_PDWN16x66 | CFG_PDWN32x66 |
CFG_PDWN64x66, dcrtc->base + LCD_SPU_SRAM_PARA1);
writel_relaxed(0x2032ff81, dcrtc->base + LCD_SPU_DMA_CTRL1);
- writel_relaxed(0x00000000, dcrtc->base + LCD_SPU_GRA_OVSA_HPXL_VLN);
writel_relaxed(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA);
writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR);
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
