On Mon, Oct 24, 2016 at 06:46:36PM +0200, Bartosz Golaszewski wrote: > Create a new driver for the da8xx DDR2/mDDR controller and implement > support for writing to the Peripheral Bus Burst Priority Register. > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> > --- > .../memory-controllers/ti-da8xx-ddrctl.txt | 20 +++ > drivers/memory/Kconfig | 8 + > drivers/memory/Makefile | 1 + > drivers/memory/da8xx-ddrctl.c | 187 +++++++++++++++++++++ > 4 files changed, 216 insertions(+) > create mode 100644 Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt > create mode 100644 drivers/memory/da8xx-ddrctl.c > > diff --git a/Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt b/Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt > new file mode 100644 > index 0000000..f0eda59 > --- /dev/null > +++ b/Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt > @@ -0,0 +1,20 @@ > +* Device tree bindings for Texas Instruments da8xx DDR2/mDDR memory controller > + > +The DDR2/mDDR memory controller present on Texas Instruments da8xx SoCs memory > +maps a set of registers which allow to tweak the controller's behavior. This is a description of the *driver*. The device itself doesn't map some registers, it features them. Please descrive the *device*. > + > +Documentation: > +OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf > + > +Required properties: > + > +- compatible: "ti,da850-ddrctl" - for da850 SoC based boards Perhaps: "ti,da850-ddr-controller" > +static int da8xx_ddrctl_probe(struct platform_device *pdev) > +{ > + const struct da8xx_ddrctl_config_knob *knob; > + const struct da8xx_ddrctl_setting *setting; > + u32 regprop[2], base, memsize, reg; > + struct device_node *node, *parent; > + void __iomem *ddrctl; > + const char *board; > + struct device *dev; > + int ret; > + > + dev = &pdev->dev; > + node = dev->of_node; > + > + /* Find the board name. */ > + for (parent = node; > + !of_node_is_root(parent); > + parent = of_get_parent(parent)); > + > + ret = of_property_read_string(parent, "compatible", &board); > + if (ret) { > + dev_err(dev, "unable to read the soc model\n"); > + return ret; > + } I can see that you want to expose sysfs knobs for this, but is it really necessary to match boards like this? It's very fragile, and commits us to maintaining a database of board data (i.e. a board file). I am very much not keen on that. > + > + /* Check if we have settings for this board. */ > + setting = da8xx_ddrctl_match_board(board); > + if (!setting) { > + dev_err(dev, "no settings for board '%s'\n", board); > + return -EINVAL; > + } What's wrong with of_machine_is_compatible? > + > + /* Figure out how to map the memory for the controller. */ > + ret = of_property_read_u32_array(node, "reg", regprop, 2); > + if (ret) { > + dev_err(dev, "unable to parse 'reg' property\n"); > + return ret; > + } > + > + base = regprop[0]; > + memsize = regprop[1]; > + > + ddrctl = ioremap(base, memsize); NAK. Use the proper accessors for handling reg entries. Thanks, Mark. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
