This is a follow-up for the series[1] adding new bus and memory drivers to better support the TI LCD controller on the da850-lcdk board. The general consensus of the discussion that followed was that DT is not the right tool for this kind of SoC performance tweaks. In order to avoid committing to stable DT bindings, we only introduce two common properties (compatible and reg) while the configuration register values are hard-coded for each board (currently only lcdk). I'm sending a single patch this time as RFC to get some reviews and see it the approach is viewed as correct. [1] https://lkml.org/lkml/2016/10/17/613 Bartosz Golaszewski (1): ARM: memory: da8xx-ddrctl: new driver .../memory-controllers/ti-da8xx-ddrctl.txt | 20 +++ drivers/memory/Kconfig | 8 + drivers/memory/Makefile | 1 + drivers/memory/da8xx-ddrctl.c | 187 +++++++++++++++++++++ 4 files changed, 216 insertions(+) create mode 100644 Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt create mode 100644 drivers/memory/da8xx-ddrctl.c -- 2.9.3 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
