2016년 09월 28일 09:03에 Tobias Jakobi 이(가) 쓴 글: > Hey Inki, > > > Inki Dae wrote: >> >> >> 2016년 09월 28일 01:52에 Tobias Jakobi 이(가) 쓴 글: >>> Hello Andrzej, >>> >>> >>> Andrzej Hajda wrote: >>>> On 27.09.2016 13:22, Tobias Jakobi wrote: >>>>> Hello Inki, >>>>> >>>>> >>>>> Inki Dae wrote: >>>>>> 2016년 09월 26일 20:36에 Tobias Jakobi 이(가) 쓴 글: >>>>>>> Only manipulate the MXR_CFG and MXR_LAYER_CFG registers once >>>>>>> in mixer_cfg_layer(). >>>>>>> Trigger this via atomic flush. >>>>>>> >>>>>>> Changes in v2: >>>>>>> - issue mixer_cfg_layer() in mixer_disable() >>>>>>> - rename fields as suggested by Andrzej >>>>>>> - added docu to mixer context struct >>>>>>> - simplify mixer_win_reset() as well >>>>>>> >>>>>>> Changes in v3: >>>>>>> - simplify some conditions as suggested by Inki >>>>>>> - add docu to mixer_cfg_layer() >>>>>>> - fold switch statements into a single one >>>>>>> >>>>>>> Signed-off-by: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx> >>>>>>> --- >>>>>>> drivers/gpu/drm/exynos/exynos_mixer.c | 135 ++++++++++++++++++++++------------ >>>>>>> drivers/gpu/drm/exynos/regs-mixer.h | 2 + >>>>>>> 2 files changed, 92 insertions(+), 45 deletions(-) >>>>>>> >>>>>>> diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c >>>>>>> index 1e78d57..4f06f4d 100644 >>>>>>> --- a/drivers/gpu/drm/exynos/exynos_mixer.c >>>>>>> +++ b/drivers/gpu/drm/exynos/exynos_mixer.c >>>>>>> @@ -93,12 +93,25 @@ static const uint32_t vp_formats[] = { >>>>>>> DRM_FORMAT_NV21, >>>>>>> }; >>>>>>> >>>>>>> +/* >>>>>>> + * Mixer context structure. >>>>>>> + * >>>>>>> + * @crtc: The HDMI CRTC attached to the mixer. >>>>>>> + * @planes: Array of plane objects for each of the mixer windows. >>>>>>> + * @active_windows: Cache of the mixer's hardware state. >>>>>>> + * Tracks which mixer windows are active/inactive. >>>>>>> + * @pipe: The CRTC index. >>>>>>> + * @flags: Bitfield build from the mixer_flag_bits enumerator. >>>>>>> + * @mixer_resources: A struct containing registers, clocks, etc. >>>>>>> + * @mxr_ver: The hardware revision/version of the mixer. >>>>>>> + */ >>>>>>> struct mixer_context { >>>>>>> struct platform_device *pdev; >>>>>>> struct device *dev; >>>>>>> struct drm_device *drm_dev; >>>>>>> struct exynos_drm_crtc *crtc; >>>>>>> struct exynos_drm_plane planes[MIXER_WIN_NR]; >>>>>>> + unsigned long active_windows; >>>>>>> int pipe; >>>>>>> unsigned long flags; >>>>>>> >>>>>>> @@ -418,37 +431,70 @@ static void mixer_cfg_rgb_fmt(struct mixer_context *ctx, unsigned int height) >>>>>>> mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_RGB_FMT_MASK); >>>>>>> } >>>>>>> >>>>>>> -static void mixer_cfg_layer(struct mixer_context *ctx, unsigned int win, >>>>>>> - unsigned int priority, bool enable) >>>>>>> +/** >>>>>>> + * mixer_cfg_layer - apply layer configuration to hardware >>>>>>> + * @ctx: mixer context >>>>>>> + * >>>>>>> + * This configures the MXR_CFG and MXR_LAYER_CFG hardware registers >>>>>>> + * using the 'active_windows' field of the the mixer content, and >>>>>>> + * the pixel format of the framebuffers associated with the enabled >>>>>>> + * windows. >>>>>>> + * >>>>>>> + * Has to be called under mixer lock. >>>>>>> + */ >>>>>>> +static void mixer_cfg_layer(struct mixer_context *ctx) >>>>>>> { >>>>>>> struct mixer_resources *res = &ctx->mixer_res; >>>>>>> - u32 val = enable ? ~0 : 0; >>>>>>> - >>>>>>> - switch (win) { >>>>>>> - case 0: >>>>>>> - mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_GRP0_ENABLE); >>>>>>> - mixer_reg_writemask(res, MXR_LAYER_CFG, >>>>>>> - MXR_LAYER_CFG_GRP0_VAL(priority), >>>>>>> - MXR_LAYER_CFG_GRP0_MASK); >>>>>>> - break; >>>>>>> - case 1: >>>>>>> - mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_GRP1_ENABLE); >>>>>>> - mixer_reg_writemask(res, MXR_LAYER_CFG, >>>>>>> - MXR_LAYER_CFG_GRP1_VAL(priority), >>>>>>> - MXR_LAYER_CFG_GRP1_MASK); >>>>>>> + unsigned int win; >>>>>>> >>>>>>> - break; >>>>>>> - case VP_DEFAULT_WIN: >>>>>>> - if (test_bit(MXR_BIT_VP_ENABLED, &ctx->flags)) { >>>>>>> - vp_reg_writemask(res, VP_ENABLE, val, VP_ENABLE_ON); >>>>>>> - mixer_reg_writemask(res, MXR_CFG, val, >>>>>>> - MXR_CFG_VP_ENABLE); >>>>>>> - mixer_reg_writemask(res, MXR_LAYER_CFG, >>>>>>> - MXR_LAYER_CFG_VP_VAL(priority), >>>>>>> - MXR_LAYER_CFG_VP_MASK); >>>>>>> + struct exynos_drm_plane_state *state; >>>>>>> + struct drm_framebuffer *fb; >>>>>>> + unsigned int priority; >>>>>>> + u32 mxr_cfg = 0, mxr_layer_cfg = 0, vp_enable = 0; >>>>>>> + bool enable; >>>>>>> + >>>>>>> + for (win = 0; win < MIXER_WIN_NR; ++win) { >>>>>>> + state = to_exynos_plane_state(ctx->planes[win].base.state); >>>>>>> + fb = state->fb; >>>>>>> + >>>>>>> + priority = state->base.normalized_zpos + 1; >>>>>>> + enable = test_bit(win, &ctx->active_windows); >>>>>>> + >>>>>>> + if (!enable) >>>>>>> + continue; >>>>>>> + >>>>>>> + BUG_ON(!fb); >>>>>>> + >>>>>>> + /* >>>>>>> + * TODO: Don't enable alpha blending for the bottom window. >>>>>>> + */ >>>>>>> + switch (win) { >>>>>>> + case 0: >>>>>>> + mxr_cfg |= MXR_CFG_GRP0_ENABLE; >>>>>>> + mxr_layer_cfg |= MXR_LAYER_CFG_GRP0_VAL(priority); >>>>>>> + mixer_cfg_gfx_blend(ctx, win, is_alpha_format(fb->pixel_format)); >>>>>>> + break; >>>>>>> + >>>>>>> + case 1: >>>>>>> + mxr_cfg |= MXR_CFG_GRP1_ENABLE; >>>>>>> + mxr_layer_cfg |= MXR_LAYER_CFG_GRP1_VAL(priority); >>>>>>> + mixer_cfg_gfx_blend(ctx, win, is_alpha_format(fb->pixel_format)); >>>>>>> + break; >>>>>>> + >>>>>>> + case VP_DEFAULT_WIN: >>>>>>> + vp_enable = VP_ENABLE_ON; >>>>>>> + mxr_cfg |= MXR_CFG_VP_ENABLE; >>>>>>> + mxr_layer_cfg |= MXR_LAYER_CFG_VP_VAL(priority); >>>>>>> + mixer_cfg_vp_blend(ctx); >>>>>>> + break; >>>>>>> } >>>>>>> - break; >>>>>>> } >>>>>>> + >>>>>>> + if (test_bit(MXR_BIT_VP_ENABLED, &ctx->flags)) >>>>>>> + vp_reg_writemask(res, VP_ENABLE, vp_enable, VP_ENABLE_ON); >>>>>>> + >>>>>>> + mixer_reg_writemask(res, MXR_CFG, mxr_cfg, MXR_CFG_ENABLE_MASK); >>>>>>> + mixer_reg_writemask(res, MXR_LAYER_CFG, mxr_layer_cfg, MXR_LAYER_CFG_MASK); >>>>>>> } >>>>>>> >>>>>>> static void mixer_run(struct mixer_context *ctx) >>>>>>> @@ -478,7 +524,6 @@ static void vp_video_buffer(struct mixer_context *ctx, >>>>>>> struct drm_display_mode *mode = &state->base.crtc->state->adjusted_mode; >>>>>>> struct mixer_resources *res = &ctx->mixer_res; >>>>>>> struct drm_framebuffer *fb = state->fb; >>>>>>> - unsigned int priority = state->base.normalized_zpos + 1; >>>>>>> unsigned long flags; >>>>>>> dma_addr_t luma_addr[2], chroma_addr[2]; >>>>>>> bool tiled_mode = false; >>>>>>> @@ -563,8 +608,6 @@ static void vp_video_buffer(struct mixer_context *ctx, >>>>>>> >>>>>>> mixer_cfg_scan(ctx, mode->vdisplay); >>>>>>> mixer_cfg_rgb_fmt(ctx, mode->vdisplay); >>>>>>> - mixer_cfg_layer(ctx, plane->index, priority, true); >>>>>>> - mixer_cfg_vp_blend(ctx); >>>>>> You removed the function call to set MXR_CFG and MXR_LAYER_CFG registers so what if lagacy set plane ioctl is called by user user space? Where these register are updated? >>>>> yes, you're right. I completly forgot about the legacy codepaths. Sorry >>>>> about that! >>>> >>>> Are you talking about DRM_IOCTL_MODE_SETPLANE? >>>> It does not seem to be legacy, or to be more precise it calls >>>> .update_plane and .disable_plane >>>> callbacks which in exynos are set as follow: >>>> .update_plane = drm_atomic_helper_update_plane, >>>> .disable_plane = drm_atomic_helper_disable_plane, >>>> >>>> So DRM_IOCTL_MODE_SETPLANE calls atomic codepath anyway. >>> thanks a lot for the heads-up. I can confirm that drm_mode_setplane() >>> also goes through the atomic path. >>> >>> The simplified callstack: >>> - drm_mode_setplane() >>> - __setplane_internal() >>> - disable_plane() (set in plane_helper_funcs in exynos_drm_plane.c) >>> - update_plane() (same here) >> >> Sorry for previous comments not enough. >> >> update_plane >> ... >> - mixer_update_plane >> - vp_video_buffer or mixer_graph_buffer >> >> However, you removed mixer_cfg_layer call from above functions. > exactly, because that is the very purpose of this patch. > > >> So my intention was to keep the modifed mixer_cfg_layer call on vp_video_buffer and mixer_grpah_buffer functions. > That is not my intention. I want to move register manipulation to the > atomic flush step. > > >> mixer_atomic_flush function is not really proper place to call mixer_cfg_layer function even mixer_win_reset. > Why do you think so? I think it makes perfect sense to put it there. We > flush the new configuration to the hardware registers there. > > >> For this I mentioned already at previous my comment, >> "atomic_flush callback will be used to make sure registers to be updated to the real hardware. So calling mixer_cfg_layer function here wouldn't be reasonable." > You're confusing me. That is exactly what my patch is doing. It moves > more of the actual hardware register updating to the atomic flush step. Ok, for your understanding, you can check atomic_begin, atomic_flush and update_plane callback functions of exynos_drm_fimd.c. After that I think we could continue to discuss this. I doesn't really want to tackle you. > > >> Also it would be reasonable to remove mixer_cfg_layer function call from mixer_win_reset function. > Why is that? In mixer_win_reset() we want to apply a default > configuration to the various registers. Hence we set active_windows to > zero and call mixer_cfg_layer(). > > > With best wishes, > Tobias > > > >>> For completeness I've also checked drm_mode_setcrtc(), the other legacy >>> DRM call that manipulates the primary plane. >>> >>> It goes the following route: >>> - drm_mode_setcrtc >>> - drm_mode_set_config_internal() >>> - set_config() (set in exynos_crtc_funcs in exynos_drm_crtc.c) >>> >>> Also here: .set_config = drm_atomic_helper_set_config >>> >>> Both DRM_IOCTL_MODE_SETPLANE and DRM_IOCTL_MODE_CRTC go the atomic >>> route, so the patch is fine this way. >>> >>> @Inki: Can you still queue this up for 4.9.y? >>> >>> >>> With best wishes, >>> Tobias >>> >>> >>>> >>>> Regards >>>> Andrzej >>>> >>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >>> the body of a message to majordomo@xxxxxxxxxxxxxxx >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >>> >>> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > > > > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel