Re: [PATCH v3] drm/exynos: mixer: configure layers once in mixer_atomic_flush()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




2016년 09월 28일 01:52에 Tobias Jakobi 이(가) 쓴 글:
> Hello Andrzej,
> 
> 
> Andrzej Hajda wrote:
>> On 27.09.2016 13:22, Tobias Jakobi wrote:
>>> Hello Inki,
>>>
>>>
>>> Inki Dae wrote:
>>>> 2016년 09월 26일 20:36에 Tobias Jakobi 이(가) 쓴 글:
>>>>> Only manipulate the MXR_CFG and MXR_LAYER_CFG registers once
>>>>> in mixer_cfg_layer().
>>>>> Trigger this via atomic flush.
>>>>>
>>>>> Changes in v2:
>>>>> - issue mixer_cfg_layer() in mixer_disable()
>>>>> - rename fields as suggested by Andrzej
>>>>> - added docu to mixer context struct
>>>>> - simplify mixer_win_reset() as well
>>>>>
>>>>> Changes in v3:
>>>>> - simplify some conditions as suggested by Inki
>>>>> - add docu to mixer_cfg_layer()
>>>>> - fold switch statements into a single one
>>>>>
>>>>> Signed-off-by: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
>>>>> ---
>>>>>  drivers/gpu/drm/exynos/exynos_mixer.c | 135 ++++++++++++++++++++++------------
>>>>>  drivers/gpu/drm/exynos/regs-mixer.h   |   2 +
>>>>>  2 files changed, 92 insertions(+), 45 deletions(-)
>>>>>
>>>>> diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
>>>>> index 1e78d57..4f06f4d 100644
>>>>> --- a/drivers/gpu/drm/exynos/exynos_mixer.c
>>>>> +++ b/drivers/gpu/drm/exynos/exynos_mixer.c
>>>>> @@ -93,12 +93,25 @@ static const uint32_t vp_formats[] = {
>>>>>  	DRM_FORMAT_NV21,
>>>>>  };
>>>>>  
>>>>> +/*
>>>>> + * Mixer context structure.
>>>>> + *
>>>>> + * @crtc: The HDMI CRTC attached to the mixer.
>>>>> + * @planes: Array of plane objects for each of the mixer windows.
>>>>> + * @active_windows: Cache of the mixer's hardware state.
>>>>> + *       Tracks which mixer windows are active/inactive.
>>>>> + * @pipe: The CRTC index.
>>>>> + * @flags: Bitfield build from the mixer_flag_bits enumerator.
>>>>> + * @mixer_resources: A struct containing registers, clocks, etc.
>>>>> + * @mxr_ver: The hardware revision/version of the mixer.
>>>>> + */
>>>>>  struct mixer_context {
>>>>>  	struct platform_device *pdev;
>>>>>  	struct device		*dev;
>>>>>  	struct drm_device	*drm_dev;
>>>>>  	struct exynos_drm_crtc	*crtc;
>>>>>  	struct exynos_drm_plane	planes[MIXER_WIN_NR];
>>>>> +	unsigned long		active_windows;
>>>>>  	int			pipe;
>>>>>  	unsigned long		flags;
>>>>>  
>>>>> @@ -418,37 +431,70 @@ static void mixer_cfg_rgb_fmt(struct mixer_context *ctx, unsigned int height)
>>>>>  	mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_RGB_FMT_MASK);
>>>>>  }
>>>>>  
>>>>> -static void mixer_cfg_layer(struct mixer_context *ctx, unsigned int win,
>>>>> -			    unsigned int priority, bool enable)
>>>>> +/**
>>>>> + * mixer_cfg_layer - apply layer configuration to hardware
>>>>> + * @ctx: mixer context
>>>>> + *
>>>>> + * This configures the MXR_CFG and MXR_LAYER_CFG hardware registers
>>>>> + * using the 'active_windows' field of the the mixer content, and
>>>>> + * the pixel format of the framebuffers associated with the enabled
>>>>> + * windows.
>>>>> + *
>>>>> + * Has to be called under mixer lock.
>>>>> + */
>>>>> +static void mixer_cfg_layer(struct mixer_context *ctx)
>>>>>  {
>>>>>  	struct mixer_resources *res = &ctx->mixer_res;
>>>>> -	u32 val = enable ? ~0 : 0;
>>>>> -
>>>>> -	switch (win) {
>>>>> -	case 0:
>>>>> -		mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_GRP0_ENABLE);
>>>>> -		mixer_reg_writemask(res, MXR_LAYER_CFG,
>>>>> -				    MXR_LAYER_CFG_GRP0_VAL(priority),
>>>>> -				    MXR_LAYER_CFG_GRP0_MASK);
>>>>> -		break;
>>>>> -	case 1:
>>>>> -		mixer_reg_writemask(res, MXR_CFG, val, MXR_CFG_GRP1_ENABLE);
>>>>> -		mixer_reg_writemask(res, MXR_LAYER_CFG,
>>>>> -				    MXR_LAYER_CFG_GRP1_VAL(priority),
>>>>> -				    MXR_LAYER_CFG_GRP1_MASK);
>>>>> +	unsigned int win;
>>>>>  
>>>>> -		break;
>>>>> -	case VP_DEFAULT_WIN:
>>>>> -		if (test_bit(MXR_BIT_VP_ENABLED, &ctx->flags)) {
>>>>> -			vp_reg_writemask(res, VP_ENABLE, val, VP_ENABLE_ON);
>>>>> -			mixer_reg_writemask(res, MXR_CFG, val,
>>>>> -				MXR_CFG_VP_ENABLE);
>>>>> -			mixer_reg_writemask(res, MXR_LAYER_CFG,
>>>>> -					    MXR_LAYER_CFG_VP_VAL(priority),
>>>>> -					    MXR_LAYER_CFG_VP_MASK);
>>>>> +	struct exynos_drm_plane_state *state;
>>>>> +	struct drm_framebuffer *fb;
>>>>> +	unsigned int priority;
>>>>> +	u32 mxr_cfg = 0, mxr_layer_cfg = 0, vp_enable = 0;
>>>>> +	bool enable;
>>>>> +
>>>>> +	for (win = 0; win < MIXER_WIN_NR; ++win) {
>>>>> +		state = to_exynos_plane_state(ctx->planes[win].base.state);
>>>>> +		fb = state->fb;
>>>>> +
>>>>> +		priority = state->base.normalized_zpos + 1;
>>>>> +		enable = test_bit(win, &ctx->active_windows);
>>>>> +
>>>>> +		if (!enable)
>>>>> +			continue;
>>>>> +
>>>>> +		BUG_ON(!fb);
>>>>> +
>>>>> +		/*
>>>>> +		 * TODO: Don't enable alpha blending for the bottom window.
>>>>> +		 */
>>>>> +		switch (win) {
>>>>> +		case 0:
>>>>> +			mxr_cfg |=  MXR_CFG_GRP0_ENABLE;
>>>>> +			mxr_layer_cfg |= MXR_LAYER_CFG_GRP0_VAL(priority);
>>>>> +			mixer_cfg_gfx_blend(ctx, win, is_alpha_format(fb->pixel_format));
>>>>> +			break;
>>>>> +
>>>>> +		case 1:
>>>>> +			mxr_cfg |=  MXR_CFG_GRP1_ENABLE;
>>>>> +			mxr_layer_cfg |= MXR_LAYER_CFG_GRP1_VAL(priority);
>>>>> +			mixer_cfg_gfx_blend(ctx, win, is_alpha_format(fb->pixel_format));
>>>>> +			break;
>>>>> +
>>>>> +		case VP_DEFAULT_WIN:
>>>>> +			vp_enable = VP_ENABLE_ON;
>>>>> +			mxr_cfg |=  MXR_CFG_VP_ENABLE;
>>>>> +			mxr_layer_cfg |= MXR_LAYER_CFG_VP_VAL(priority);
>>>>> +			mixer_cfg_vp_blend(ctx);
>>>>> +			break;
>>>>>  		}
>>>>> -		break;
>>>>>  	}
>>>>> +
>>>>> +	if (test_bit(MXR_BIT_VP_ENABLED, &ctx->flags))
>>>>> +		vp_reg_writemask(res, VP_ENABLE, vp_enable, VP_ENABLE_ON);
>>>>> +
>>>>> +	mixer_reg_writemask(res, MXR_CFG, mxr_cfg, MXR_CFG_ENABLE_MASK);
>>>>> +	mixer_reg_writemask(res, MXR_LAYER_CFG, mxr_layer_cfg, MXR_LAYER_CFG_MASK);
>>>>>  }
>>>>>  
>>>>>  static void mixer_run(struct mixer_context *ctx)
>>>>> @@ -478,7 +524,6 @@ static void vp_video_buffer(struct mixer_context *ctx,
>>>>>  	struct drm_display_mode *mode = &state->base.crtc->state->adjusted_mode;
>>>>>  	struct mixer_resources *res = &ctx->mixer_res;
>>>>>  	struct drm_framebuffer *fb = state->fb;
>>>>> -	unsigned int priority = state->base.normalized_zpos + 1;
>>>>>  	unsigned long flags;
>>>>>  	dma_addr_t luma_addr[2], chroma_addr[2];
>>>>>  	bool tiled_mode = false;
>>>>> @@ -563,8 +608,6 @@ static void vp_video_buffer(struct mixer_context *ctx,
>>>>>  
>>>>>  	mixer_cfg_scan(ctx, mode->vdisplay);
>>>>>  	mixer_cfg_rgb_fmt(ctx, mode->vdisplay);
>>>>> -	mixer_cfg_layer(ctx, plane->index, priority, true);
>>>>> -	mixer_cfg_vp_blend(ctx);
>>>> You removed the function call to set MXR_CFG and MXR_LAYER_CFG registers so what if lagacy set plane ioctl is called by user user space? Where these register are updated?
>>> yes, you're right. I completly forgot about the legacy codepaths. Sorry
>>> about that!
>>
>> Are you talking about DRM_IOCTL_MODE_SETPLANE?
>> It does not seem to be legacy, or to be more precise it calls
>> .update_plane and .disable_plane
>> callbacks which in exynos are set as follow:
>>     .update_plane    = drm_atomic_helper_update_plane,
>>     .disable_plane    = drm_atomic_helper_disable_plane,
>>
>> So DRM_IOCTL_MODE_SETPLANE calls atomic codepath anyway.
> thanks a lot for the heads-up. I can confirm that drm_mode_setplane()
> also goes through the atomic path.
> 
> The simplified callstack:
> - drm_mode_setplane()
>   - __setplane_internal()
>     - disable_plane() (set in plane_helper_funcs in exynos_drm_plane.c)
>     - update_plane() (same here)

Sorry for previous comments not enough.

update_plane
	...
	- mixer_update_plane
		- vp_video_buffer or mixer_graph_buffer

However, you removed mixer_cfg_layer call from above functions.

So my intention was to keep the modifed mixer_cfg_layer call on vp_video_buffer and mixer_grpah_buffer functions.
mixer_atomic_flush function is not really proper place to call mixer_cfg_layer function even mixer_win_reset.
For this I mentioned already at previous my comment,
"atomic_flush callback will be used to make sure registers to be updated to the real hardware. So calling mixer_cfg_layer function here wouldn't be reasonable."

Also it would be reasonable to remove mixer_cfg_layer function call from mixer_win_reset function.

> 
> 
> For completeness I've also checked drm_mode_setcrtc(), the other legacy
> DRM call that manipulates the primary plane.
> 
> It goes the following route:
> - drm_mode_setcrtc
>   - drm_mode_set_config_internal()
>     - set_config() (set in exynos_crtc_funcs in exynos_drm_crtc.c)
> 
> Also here: .set_config = drm_atomic_helper_set_config
> 
> Both DRM_IOCTL_MODE_SETPLANE and DRM_IOCTL_MODE_CRTC go the atomic
> route, so the patch is fine this way.
> 
> @Inki: Can you still queue this up for 4.9.y?
> 
> 
> With best wishes,
> Tobias
> 
> 
>>
>> Regards
>> Andrzej
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> 
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux