On Mon, Aug 8, 2016 at 1:33 AM, Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> wrote:
> On Sat, 06 Aug 2016, Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx> wrote:
>> This patch is blocking PSR on panels that we know that our hardware support.
>
> And it also fixes a regression on Linus' laptop, and it's been merged
> upstream...
yeap, this patch is like setting i915.enable_psr=0...
I still believe we have an error somewhere else.
With this patch in place there is no panel out there with PSR
supported with preferred mode.
Maybe this ultra fast vblank is confusing this PSR blocks if this are
the expected timings...
>
> BR,
> Jani.
>
>>
>> I wonder if:
>> 1. This restrictions was for older platforms and spec is out dated
>> 2. Or Spec is not documenting the restriction properly
>> 3. Or we have some issue with out setup time calculation.
>>
>>
>> On Tue, May 31, 2016 at 8:50 AM, <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
>>> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>>>
>>> Bspec says:
>>> "Restriction : SRD must not be enabled when the PSR Setup time from DPCD
>>> 00071h is greater than the time for vertical blank minus one line."
>>>
>>> Let's check for that and disallow PSR if we exceed the limit.
>>>
>>> Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
>>> Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
>>> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>>> ---
>>> drivers/gpu/drm/i915/intel_drv.h | 2 ++
>>> drivers/gpu/drm/i915/intel_psr.c | 19 ++++++++++++++++++-
>>> drivers/gpu/drm/i915/intel_sprite.c | 6 +++---
>>> 3 files changed, 23 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>>> index 9b5f6634c558..56ae3b78e25e 100644
>>> --- a/drivers/gpu/drm/i915/intel_drv.h
>>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>>> @@ -1672,6 +1672,8 @@ bool intel_sdvo_init(struct drm_device *dev,
>>>
>>>
>>> /* intel_sprite.c */
>>> +int intel_usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
>>> + int usecs);
>>> int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane);
>>> int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
>>> struct drm_file *file_priv);
>>> diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
>>> index 29a09bf6bd18..aacd8d1767f2 100644
>>> --- a/drivers/gpu/drm/i915/intel_psr.c
>>> +++ b/drivers/gpu/drm/i915/intel_psr.c
>>> @@ -327,6 +327,9 @@ static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
>>> struct drm_i915_private *dev_priv = dev->dev_private;
>>> struct drm_crtc *crtc = dig_port->base.base.crtc;
>>> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>>> + const struct drm_display_mode *adjusted_mode =
>>> + &intel_crtc->config->base.adjusted_mode;
>>> + int psr_setup_time;
>>>
>>> lockdep_assert_held(&dev_priv->psr.lock);
>>> WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
>>> @@ -365,11 +368,25 @@ static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
>>> }
>>>
>>> if (IS_HASWELL(dev) &&
>>> - intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
>>> + adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
>>> DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n");
>>> return false;
>>> }
>>>
>>> + psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd);
>>> + if (psr_setup_time < 0) {
>>> + DRM_DEBUG_KMS("PSR condition failed: Invalid PSR setup time (0x%02x)\n",
>>> + intel_dp->psr_dpcd[1]);
>>> + return false;
>>> + }
>>> +
>>> + if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
>>> + adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay - 1) {
>>> + DRM_DEBUG_KMS("PSR condition failed: PSR setup time (%d us) too long\n",
>>> + psr_setup_time);
>>> + return false;
>>> + }
>>> +
>>> dev_priv->psr.source_ok = true;
>>> return true;
>>> }
>>> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
>>> index 324ccb06397d..293b48007006 100644
>>> --- a/drivers/gpu/drm/i915/intel_sprite.c
>>> +++ b/drivers/gpu/drm/i915/intel_sprite.c
>>> @@ -53,8 +53,8 @@ format_is_yuv(uint32_t format)
>>> }
>>> }
>>>
>>> -static int usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
>>> - int usecs)
>>> +int intel_usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
>>> + int usecs)
>>> {
>>> /* paranoia */
>>> if (!adjusted_mode->crtc_htotal)
>>> @@ -91,7 +91,7 @@ void intel_pipe_update_start(struct intel_crtc *crtc)
>>> vblank_start = DIV_ROUND_UP(vblank_start, 2);
>>>
>>> /* FIXME needs to be calibrated sensibly */
>>> - min = vblank_start - usecs_to_scanlines(adjusted_mode, 100);
>>> + min = vblank_start - intel_usecs_to_scanlines(adjusted_mode, 100);
>>> max = vblank_start - 1;
>>>
>>> local_irq_disable();
>>> --
>>> 2.7.4
>>>
>>> _______________________________________________
>>> Intel-gfx mailing list
>>> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
>>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Jani Nikula, Intel Open Source Technology Center
--
Rodrigo Vivi
Blog: http://blog.vivi.eng.br
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
