Hi, CK,
I'm appreciate your comment.
On Wed, 2016-07-20 at 15:15 +0800, CK Hu wrote:
> Hi, Bibby:
>
> One comment inline.
>
> On Wed, 2016-07-20 at 12:03 +0800, Bibby Hsieh wrote:
> > From: Junzhi Zhao <junzhi.zhao@xxxxxxxxxxxx>
> >
> > In order to improve 4K resolution performance,
> > we have to enhance the HDMI driving currend
> > when clock rate is greater than 165MHz.
> >
> > Signed-off-by: Junzhi Zhao <junzhi.zhao@xxxxxxxxxxxx>
> > Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 89 +++++++++++++++++-------
> > 1 file changed, 63 insertions(+), 26 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
> > index 8a24754..a871c14 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
> > @@ -298,32 +298,69 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> > (0x1 << PLL_BR_SHIFT),
> > RG_HDMITX_PLL_BP | RG_HDMITX_PLL_BC |
> > RG_HDMITX_PLL_BR);
> > - mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON3, RG_HDMITX_PRD_IMP_EN);
> > - mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4,
> > - (0x3 << PRD_IBIAS_CLK_SHIFT) |
> > - (0x3 << PRD_IBIAS_D2_SHIFT) |
> > - (0x3 << PRD_IBIAS_D1_SHIFT) |
> > - (0x3 << PRD_IBIAS_D0_SHIFT),
> > - RG_HDMITX_PRD_IBIAS_CLK |
> > - RG_HDMITX_PRD_IBIAS_D2 |
> > - RG_HDMITX_PRD_IBIAS_D1 |
> > - RG_HDMITX_PRD_IBIAS_D0);
> > - mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON3,
> > - (0x0 << DRV_IMP_EN_SHIFT), RG_HDMITX_DRV_IMP_EN);
> > - mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6,
> > - (hdmi_phy->drv_imp_clk << DRV_IMP_CLK_SHIFT) |
> > - (hdmi_phy->drv_imp_d2 << DRV_IMP_D2_SHIFT) |
> > - (hdmi_phy->drv_imp_d1 << DRV_IMP_D1_SHIFT) |
> > - (hdmi_phy->drv_imp_d0 << DRV_IMP_D0_SHIFT),
> > - RG_HDMITX_DRV_IMP_CLK | RG_HDMITX_DRV_IMP_D2 |
> > - RG_HDMITX_DRV_IMP_D1 | RG_HDMITX_DRV_IMP_D0);
> > - mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON5,
> > - (hdmi_phy->ibias << DRV_IBIAS_CLK_SHIFT) |
> > - (hdmi_phy->ibias << DRV_IBIAS_D2_SHIFT) |
> > - (hdmi_phy->ibias << DRV_IBIAS_D1_SHIFT) |
> > - (hdmi_phy->ibias << DRV_IBIAS_D0_SHIFT),
> > - RG_HDMITX_DRV_IBIAS_CLK | RG_HDMITX_DRV_IBIAS_D2 |
> > - RG_HDMITX_DRV_IBIAS_D1 | RG_HDMITX_DRV_IBIAS_D0);
> > + if (rate < 165000000) {
> > + mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON3,
> > + RG_HDMITX_PRD_IMP_EN);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4,
> > + (0x3 << PRD_IBIAS_CLK_SHIFT) |
> > + (0x3 << PRD_IBIAS_D2_SHIFT) |
> > + (0x3 << PRD_IBIAS_D1_SHIFT) |
> > + (0x3 << PRD_IBIAS_D0_SHIFT),
> > + RG_HDMITX_PRD_IBIAS_CLK |
> > + RG_HDMITX_PRD_IBIAS_D2 |
> > + RG_HDMITX_PRD_IBIAS_D1 |
> > + RG_HDMITX_PRD_IBIAS_D0);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON3,
> > + (0x0 << DRV_IMP_EN_SHIFT),
> > + RG_HDMITX_DRV_IMP_EN);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6,
> > + (hdmi_phy->drv_imp_clk << DRV_IMP_CLK_SHIFT) |
> > + (hdmi_phy->drv_imp_d2 << DRV_IMP_D2_SHIFT) |
> > + (hdmi_phy->drv_imp_d1 << DRV_IMP_D1_SHIFT) |
> > + (hdmi_phy->drv_imp_d0 << DRV_IMP_D0_SHIFT),
> > + RG_HDMITX_DRV_IMP_CLK | RG_HDMITX_DRV_IMP_D2 |
> > + RG_HDMITX_DRV_IMP_D1 | RG_HDMITX_DRV_IMP_D0);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON5,
> > + (hdmi_phy->ibias << DRV_IBIAS_CLK_SHIFT) |
> > + (hdmi_phy->ibias << DRV_IBIAS_D2_SHIFT) |
> > + (hdmi_phy->ibias << DRV_IBIAS_D1_SHIFT) |
> > + (hdmi_phy->ibias << DRV_IBIAS_D0_SHIFT),
> > + RG_HDMITX_DRV_IBIAS_CLK |
> > + RG_HDMITX_DRV_IBIAS_D2 |
> > + RG_HDMITX_DRV_IBIAS_D1 |
> > + RG_HDMITX_DRV_IBIAS_D0);
> > + } else {
> > + mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON3,
> > + RG_HDMITX_PRD_IMP_EN);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4,
> > + (0x6 << PRD_IBIAS_CLK_SHIFT) |
> > + (0x6 << PRD_IBIAS_D2_SHIFT) |
> > + (0x6 << PRD_IBIAS_D1_SHIFT) |
> > + (0x6 << PRD_IBIAS_D0_SHIFT),
> > + RG_HDMITX_PRD_IBIAS_CLK |
> > + RG_HDMITX_PRD_IBIAS_D2 |
> > + RG_HDMITX_PRD_IBIAS_D1 |
> > + RG_HDMITX_PRD_IBIAS_D0);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON3,
> > + (0xf << DRV_IMP_EN_SHIFT),
> > + RG_HDMITX_DRV_IMP_EN);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6,
> > + (hdmi_phy->drv_imp_clk << DRV_IMP_CLK_SHIFT) |
> > + (hdmi_phy->drv_imp_d2 << DRV_IMP_D2_SHIFT) |
> > + (hdmi_phy->drv_imp_d1 << DRV_IMP_D1_SHIFT) |
> > + (hdmi_phy->drv_imp_d0 << DRV_IMP_D0_SHIFT),
> > + RG_HDMITX_DRV_IMP_CLK | RG_HDMITX_DRV_IMP_D2 |
> > + RG_HDMITX_DRV_IMP_D1 | RG_HDMITX_DRV_IMP_D0);
> > + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON5,
> > + (hdmi_phy->ibias_up << DRV_IBIAS_CLK_SHIFT) |
> > + (hdmi_phy->ibias_up << DRV_IBIAS_D2_SHIFT) |
> > + (hdmi_phy->ibias_up << DRV_IBIAS_D1_SHIFT) |
> > + (hdmi_phy->ibias_up << DRV_IBIAS_D0_SHIFT),
> > + RG_HDMITX_DRV_IBIAS_CLK |
> > + RG_HDMITX_DRV_IBIAS_D2 |
> > + RG_HDMITX_DRV_IBIAS_D1 |
> > + RG_HDMITX_DRV_IBIAS_D0);
> > + }
>
> 'if' part and 'else' part looks almost the same. Use variable for
> difference and merge these two part. For example:
>
> if (rate < 165000000)
> prd_ibias = 0x3;
> else
> prd_ibias = 0x6;
>
> mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4,
> (prd_ibias << PRD_IBIAS_CLK_SHIFT) |
> (prd_ibias << PRD_IBIAS_D2_SHIFT) |
> (prd_ibias << PRD_IBIAS_D1_SHIFT) |
> (prd_ibias << PRD_IBIAS_D0_SHIFT),
> RG_HDMITX_PRD_IBIAS_CLK |
> RG_HDMITX_PRD_IBIAS_D2 |
> RG_HDMITX_PRD_IBIAS_D1 |
> RG_HDMITX_PRD_IBIAS_D0);
>
> > return 0;
> > }
> >
Ok, I will use variable instead of that.
>
> Regards,
> CK
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
