On Fri, Jul 15, 2016 at 04:50:53PM +0800, Meng Yi wrote:
> Gamma correction is optional and can be used to adjust the color
> output values to match the gamut of a particular TFT LCD panel
>
> Signed-off-by: Meng Yi <meng.yi@xxxxxxx>
Please use the new atomic color management properties instead. There's a
function to remap the old gamma table to these new properties for old
userspace.
-Daniel
> ---
> drivers/gpu/drm/fsl-dcu/Kconfig | 6 +++
> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 63 ++++++++++++++++++++++++++++++
> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 7 ++++
> 3 files changed, 76 insertions(+)
>
> diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-dcu/Kconfig
> index b9c714d..ddfe3c4 100644
> --- a/drivers/gpu/drm/fsl-dcu/Kconfig
> +++ b/drivers/gpu/drm/fsl-dcu/Kconfig
> @@ -16,3 +16,9 @@ config DRM_FSL_DCU
> help
> Choose this option if you have an Freescale DCU chipset.
> If M is selected the module will be called fsl-dcu-drm.
> +
> +config DRM_FSL_DCU_GAMMA
> + bool "Gamma Correction Support for NXP/Freescale DCU"
> + depends on DRM_FSL_DCU
> + help
> + Enable support for gamma correction.
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
> index 3371635..d8426b1 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
> @@ -46,6 +46,11 @@ static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc)
>
> drm_crtc_vblank_off(crtc);
>
> +#ifdef CONFIG_DRM_FSL_DCU_GAMMA
> + regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
> + DCU_MODE_EN_GAMMA_MASK,
> + DCU_MODE_GAMMA_DISABLE);
> +#endif
> regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
> DCU_MODE_DCU_MODE_MASK,
> DCU_MODE_DCU_MODE(DCU_MODE_OFF));
> @@ -58,6 +63,11 @@ static void fsl_dcu_drm_crtc_enable(struct drm_crtc *crtc)
> struct drm_device *dev = crtc->dev;
> struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
>
> +#ifdef CONFIG_DRM_FSL_DCU_GAMMA
> + regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
> + DCU_MODE_EN_GAMMA_MASK,
> + DCU_MODE_GAMMA_ENABLE);
> +#endif
> regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
> DCU_MODE_DCU_MODE_MASK,
> DCU_MODE_DCU_MODE(DCU_MODE_NORMAL));
> @@ -128,6 +138,58 @@ static const struct drm_crtc_helper_funcs fsl_dcu_drm_crtc_helper_funcs = {
> .mode_set_nofb = fsl_dcu_drm_crtc_mode_set_nofb,
> };
>
> +/*
> + * Gamma_R, Gamma_G and Gamma_B registers are little-endian registers while
> + * the rest of the address-space in 2D-ACE is big-endian. 2D-ACE Gamma_R,
> + * Gamma_G and Gamma_B registers are 32 bit registers, where the first 24
> + * bits are reserved and last 8 bits denote the gamma value. Because of a
> + * connection issue in the device, the first 8-bit [31:24] is connected and
> + * the rest of the 24-bits[23:0] are reserved.
> + * Workaround: Perform the byte_swapping for Gamma_[R/G/B]_registers.
> + * For example: While writing 0000_00ABh to any of the gamma registers, byte
> + * swap the data so it results in AB00_0000h. Write this value to the gamma
> + * register.
> + */
> +static u32 swap_bytes(u16 var)
> +{
> + union res {
> + char byte[4];
> + u32 val;
> + };
> + union res in, out;
> + unsigned int i = 0;
> +
> + in.val = var;
> + for (i = 0; i < 4; i++)
> + out.byte[i] = in.byte[3-i];
> +
> + return out.val;
> +}
> +
> +static int fsl_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
> + uint32_t size)
> +{
> + struct rgb {
> + u32 r[size], g[size], b[size];
> + };
> +
> + struct drm_device *dev = crtc->dev;
> + struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> + unsigned int i;
> + struct rgb glut;
> +
> + for (i = 0; i < size; i++) {
> + glut.r[i] = swap_bytes(r[i]);
> + glut.g[i] = swap_bytes(g[i]);
> + glut.b[i] = swap_bytes(b[i]);
> + regmap_write(fsl_dev->regmap, FSL_GAMMA_R + 4 * i, glut.r[i]);
> + regmap_write(fsl_dev->regmap, FSL_GAMMA_G + 4 * i, glut.g[i]);
> + regmap_write(fsl_dev->regmap, FSL_GAMMA_B + 4 * i, glut.b[i]);
> + }
> +
> + return 0;
> +}
> +
> static const struct drm_crtc_funcs fsl_dcu_drm_crtc_funcs = {
> .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> @@ -135,6 +197,7 @@ static const struct drm_crtc_funcs fsl_dcu_drm_crtc_funcs = {
> .page_flip = drm_atomic_helper_page_flip,
> .reset = drm_atomic_helper_crtc_reset,
> .set_config = drm_atomic_helper_set_config,
> + .gamma_set = fsl_crtc_gamma_set,
> };
>
> int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev)
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> index 3b371fe7..d3bc540 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> @@ -25,6 +25,9 @@
> #define DCU_MODE_NORMAL 1
> #define DCU_MODE_TEST 2
> #define DCU_MODE_COLORBAR 3
> +#define DCU_MODE_EN_GAMMA_MASK 0x04
> +#define DCU_MODE_GAMMA_ENABLE BIT(2)
> +#define DCU_MODE_GAMMA_DISABLE 0
>
> #define DCU_BGND 0x0014
> #define DCU_BGND_R(x) ((x) << 16)
> @@ -165,6 +168,10 @@
> #define VF610_LAYER_REG_NUM 9
> #define LS1021A_LAYER_REG_NUM 10
>
> +#define FSL_GAMMA_R 0x4000
> +#define FSL_GAMMA_G 0x4400
> +#define FSL_GAMMA_B 0x4800
> +
> struct clk;
> struct device;
> struct drm_device;
> --
> 2.1.0.27.g96db324
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
