Re: [PATCH v2 5/6] dt-bindings: add Sharp LQ123P1JX31 panel binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 06/11/2016 12:40 AM, Doug Anderson wrote:
Rob,

On Fri, Jun 10, 2016 at 6:42 AM, Rob Herring <robh@xxxxxxxxxx> wrote:
On Wed, Jun 08, 2016 at 07:52:45PM +0800, Yakir Yang wrote:
The Sharp LQ123P1JX31 is an 12.3" 2400x1600 TFT-LCD panel
connected using eDP interfaces.

Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v2:
- Add dt-bindings of Sharp LQ123P1JX31 panel in v2

  .../devicetree/bindings/display/panel/sharp,lq123p1jx31.txt        | 7 +++++++
  1 file changed, 7 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt

diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt
new file mode 100644
index 0000000..81938c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt
@@ -0,0 +1,7 @@
+Sharp 12.3" (2400x1600 pixels) TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,lq123p1jx31,"
                                              ^
Need to drop the comma.
Thanks for catching!

Done,


No regulators or resets or pwms?
Could be more explicit I guess, but Yakir does say:

This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
In that document it shows:

Required properties:
- power-supply: regulator to provide the supply voltage

Optional properties:
- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
- enable-gpios: GPIO pin to enable or disable the panel
- backlight: phandle of the backlight device attached to the panel


In general Yakir's bindings document match a huge chunk of the current
existing bindings.  Do this:
   cd Documentation/devicetree/bindings/display/panel
   grep -C20 "This binding is compatible with the simple-panel" *

You'll find a huge chunk of files which are rather formulaic.  It
might make sense to just have one file and a list of panels which are
simple panels?


-Doug





_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux