On Sat, May 14, 2016 at 10:03 AM, Emil Velikov <emil.l.velikov@xxxxxxxxx> wrote:
> Hi all,
>
> On 13 May 2016 at 19:48, Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
>> From: Eric Huang <JinHuiEric.Huang@xxxxxxx>
>>
>> This implements sclk overdrive(OD) overclocking support for Fiji,
>> and the maximum overdrive percentage is 20.
>>
>> Reviewed-by: Alex Deucher <alexander.deucher@xxxxxxx>
>> Signed-off-by: Eric Huang <JinHuiEric.Huang@xxxxxxx>
>> Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
>> ---
>> drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c | 43 ++++++++++++++++++++++++
>> 1 file changed, 43 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c
>> index 6f1bad4..bf7bf5f 100644
>> --- a/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c
>> +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/fiji_hwmgr.c
>> @@ -5274,6 +5274,47 @@ bool fiji_check_smc_update_required_for_display_configuration(struct pp_hwmgr *h
>> return is_update_required;
>> }
>>
>> +static int fiji_get_sclk_od(struct pp_hwmgr *hwmgr)
>> +{
>> + struct fiji_hwmgr *data = (struct fiji_hwmgr *)(hwmgr->backend);
>> + struct fiji_single_dpm_table *sclk_table = &(data->dpm_table.sclk_table);
>> + struct fiji_single_dpm_table *golden_sclk_table =
>> + &(data->golden_dpm_table.sclk_table);
>> + int value;
>> +
>> + value = (sclk_table->dpm_levels[sclk_table->count - 1].value -
>> + golden_sclk_table->dpm_levels[golden_sclk_table->count - 1].value) *
>> + 100 /
>> + golden_sclk_table->dpm_levels[golden_sclk_table->count - 1].value;
>> +
>> + return value;
>> +}
>> +
>> +static int fiji_set_sclk_od(struct pp_hwmgr *hwmgr, uint32_t value)
>> +{
>> + struct fiji_hwmgr *data = (struct fiji_hwmgr *)(hwmgr->backend);
>> + struct fiji_single_dpm_table *golden_sclk_table =
>> + &(data->golden_dpm_table.sclk_table);
>> + struct pp_power_state *ps;
>> + struct fiji_power_state *fiji_ps;
>> +
>> + if (value > 20)
>> + value = 20;
>> +
>> + ps = hwmgr->request_ps;
>> +
>> + if (ps == NULL)
>> + return -EINVAL;
>> +
>> + fiji_ps = cast_phw_fiji_power_state(&ps->hardware);
>> +
>> + fiji_ps->performance_levels[fiji_ps->performance_level_count - 1].engine_clock =
>> + golden_sclk_table->dpm_levels[golden_sclk_table->count - 1].value *
>> + value / 100 +
>> + golden_sclk_table->dpm_levels[golden_sclk_table->count - 1].value;
>> +
>> + return 0;
>> +}
>>
> Is it me or this patch 5/6 and 6/6 are identical ? Apart from the
> structs of course which... seems to be identical as well despite that
> they are copied across different headers and given different names.
> Imho one should try to hold them alongside this (and other related)
> code as opposed to duplicating even more code ?
>
If someone was motived. The hw is similar, but not quite the same.
Generally new asics start with a copy of the old structs and then we
add/remove stuff to handle the difference in feature sets.
Unfortunately, power management is a bit less well defined compared to
other IP blocks since it has fingers into all of the other blocks.
With amdgpu, we've generally tried to keep IP blocks versions distinct
even if they are pretty similar and results in slightly more code to
avoid regressions on different asics due to differences in hw behavior
and changes in register offsets, etc.
Alex
> Sadly, I won't be able to do any of it, plus I'm not a amdgpu
> contributor so "my 2c" as they say.
>
> Regards,
> Emil
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
