Re: [PATCH 2/2] drm: hdlcd: Suspend/resume only active crtcs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Daniel,

On 05/05/16 18:06, Daniel Vetter wrote:
On Thu, May 05, 2016 at 05:13:38PM +0100, Robin Murphy wrote:
The current PM ops simply unconditionally enable/disable the HDLCD,
which proves problematic when there is no display plugged in - since
without a crtc the hardware itself is still in an uninitialised state,
coming out of suspend results in it being enabled without a valid
framebuffer address, which typically results in it trying to scan out
from bus address 0 and flooding the system with error interrupts.

Fix this by checking the crtc state on resume, and only enabling the
hardware if it's actually supposed to be. For the sake of consistency,
do the same on the suspend path as well, although there it's merely a
case of skipping unnecessary work.

CC: Liviu Dudau <liviu.dudau@xxxxxxx>
Signed-off-by: Robin Murphy <robin.murphy@xxxxxxx>
---
  drivers/gpu/drm/arm/hdlcd_crtc.c | 6 ++++--
  1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/arm/hdlcd_crtc.c b/drivers/gpu/drm/arm/hdlcd_crtc.c
index fef1b04c2aab..bf6ff5e48adc 100644
--- a/drivers/gpu/drm/arm/hdlcd_crtc.c
+++ b/drivers/gpu/drm/arm/hdlcd_crtc.c
@@ -296,12 +296,14 @@ static struct drm_plane *hdlcd_plane_init(struct drm_device *drm)

  void hdlcd_crtc_suspend(struct drm_crtc *crtc)
  {
-	hdlcd_crtc_disable(crtc);
+	if (crtc->state->active)
+		hdlcd_crtc_disable(crtc);
  }

  void hdlcd_crtc_resume(struct drm_crtc *crtc)
  {
-	hdlcd_crtc_enable(crtc);
+	if (crtc->state->active)
+		hdlcd_crtc_enable(crtc);
  }

If you use the atomic helpers to suspend/resume your entire display
pipeline these callbacks shouldn't even be needed at all. Tried just
removing them?

I'll have to leave that in Liviu's hands as I know literally nothing about the relationship between platform PM ops and DRM helpers ;) My only motivation is for the arm64 hibernate support currently sat in -next for 4.7 to stop being broken on my Juno board by this.

Robin.

-Daniel


  int hdlcd_setup_crtc(struct drm_device *drm)
--
2.8.1.dirty

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel


_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux