On Mon, 11 Apr 2016, Jim Bride <jim.bride@xxxxxxxxxxxxxxx> wrote:
> Add some additional information (input vs. output port, sink associated
> with VC, peer device type, max number of VCs supported) and ensure that
> any embedded '\0' characters in a branch device's devid string are not
> written to debugfs.
>
> v2: Rebase + change drm_edid_get_monitor_name() call to reflect new
> signature.
>
> v3: Minor changes suggested by Jani + rebase.
>
> cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Signed-off-by: Jim Bride <jim.bride@xxxxxxxxxxxxxxx>
Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> ---
> drivers/gpu/drm/drm_dp_mst_topology.c | 29 ++++++++++++++++++++++++-----
> 1 file changed, 24 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> index 27fbd79..06d8b0a 100644
> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> @@ -2729,7 +2729,7 @@ static void drm_dp_mst_dump_mstb(struct seq_file *m,
>
> seq_printf(m, "%smst: %p, %d\n", prefix, mstb, mstb->num_ports);
> list_for_each_entry(port, &mstb->ports, next) {
> - seq_printf(m, "%sport: %d: ddps: %d ldps: %d, sdp: %d/%d, %p, conn: %p\n", prefix, port->port_num, port->ddps, port->ldps, port->num_sdp_streams, port->num_sdp_stream_sinks, port, port->connector);
> + seq_printf(m, "%sport: %d: input: %d: pdt: %d, ddps: %d ldps: %d, sdp: %d/%d, %p, conn: %p\n", prefix, port->port_num, port->input, port->pdt, port->ddps, port->ldps, port->num_sdp_streams, port->num_sdp_stream_sinks, port, port->connector);
> if (port->mstb)
> drm_dp_mst_dump_mstb(m, port->mstb);
> }
> @@ -2750,6 +2750,16 @@ static bool dump_dp_payload_table(struct drm_dp_mst_topology_mgr *mgr,
> return false;
> }
>
> +static void fetch_monitor_name(struct drm_dp_mst_topology_mgr *mgr,
> + struct drm_dp_mst_port *port, char *name,
> + int namelen)
> +{
> + struct edid *mst_edid;
> +
> + mst_edid = drm_dp_mst_get_edid(port->connector, mgr, port);
> + drm_edid_get_monitor_name(mst_edid, name, namelen);
> +}
> +
> /**
> * drm_dp_mst_dump_topology(): dump topology to seq file.
> * @m: seq_file to dump output to
> @@ -2762,6 +2772,7 @@ void drm_dp_mst_dump_topology(struct seq_file *m,
> {
> int i;
> struct drm_dp_mst_port *port;
> +
> mutex_lock(&mgr->lock);
> if (mgr->mst_primary)
> drm_dp_mst_dump_mstb(m, mgr->mst_primary);
> @@ -2770,14 +2781,21 @@ void drm_dp_mst_dump_topology(struct seq_file *m,
> mutex_unlock(&mgr->lock);
>
> mutex_lock(&mgr->payload_lock);
> - seq_printf(m, "vcpi: %lx %lx\n", mgr->payload_mask, mgr->vcpi_mask);
> + seq_printf(m, "vcpi: %lx %lx %d\n", mgr->payload_mask, mgr->vcpi_mask,
> + mgr->max_payloads);
>
> for (i = 0; i < mgr->max_payloads; i++) {
> if (mgr->proposed_vcpis[i]) {
> + char name[14];
> +
> port = container_of(mgr->proposed_vcpis[i], struct drm_dp_mst_port, vcpi);
> - seq_printf(m, "vcpi %d: %d %d %d\n", i, port->port_num, port->vcpi.vcpi, port->vcpi.num_slots);
> + fetch_monitor_name(mgr, port, name, sizeof(name));
> + seq_printf(m, "vcpi %d: %d %d %d sink name: %s\n", i,
> + port->port_num, port->vcpi.vcpi,
> + port->vcpi.num_slots,
> + (*name != 0) ? name : "Unknown");
> } else
> - seq_printf(m, "vcpi %d:unsed\n", i);
> + seq_printf(m, "vcpi %d:unused\n", i);
> }
> for (i = 0; i < mgr->max_payloads; i++) {
> seq_printf(m, "payload %d: %d, %d, %d\n",
> @@ -2817,8 +2835,9 @@ void drm_dp_mst_dump_topology(struct seq_file *m,
> for (i = 0; i < 0x3; i++)
> seq_printf(m, "%02x", buf[i]);
> seq_printf(m, " devid: ");
> - for (i = 0x3; i < 0x8; i++)
> + for (i = 0x3; i < 0x8 && buf[i]; i++)
> seq_printf(m, "%c", buf[i]);
> +
> seq_printf(m, " revision: hw: %x.%x sw: %x.%x", buf[0x9] >> 4, buf[0x9] & 0xf, buf[0xa], buf[0xb]);
> seq_printf(m, "\n");
> bret = dump_dp_payload_table(mgr, buf);
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
