On 2016-04-11 18:38, Shawn Guo wrote:
> On Mon, Apr 04, 2016 at 10:28:33PM -0700, Stefan Agner wrote:
>> Similar to an earlier fix for the SAI clocks, the DCU clock hierarchy
>> mixes the bus clock with the display controllers pixel clock. Tests
>> have shown that the gates in CCM_CCGR3/9 registers do not control
>> the DCU pixel clock, but only the register access clock (bus clock).
>>
>> Fix this by defining the parent clock of VF610_CLK_DCUx to be the bus
>> clock (ipg_bus).
>>
>> Since the clock has not been used far, there are no further changes
>> needed.
>>
>> Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
>
> Applied 1 and 2, with updating subject prefix to be 'clk: imx: vf610: '
Thanks Shawn. Applied 3~6 in my FSL DCU tree. I guess 7~9 should go
through your tree as well?
--
Stefan
>> ---
>> drivers/clk/imx/clk-vf610.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c
>> index 0a94d96..426fde2 100644
>> --- a/drivers/clk/imx/clk-vf610.c
>> +++ b/drivers/clk/imx/clk-vf610.c
>> @@ -321,11 +321,11 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
>> clk[VF610_CLK_DCU0_SEL] = imx_clk_mux("dcu0_sel", CCM_CSCMR1, 28, 1, dcu_sels, 2);
>> clk[VF610_CLK_DCU0_EN] = imx_clk_gate("dcu0_en", "dcu0_sel", CCM_CSCDR3, 19);
>> clk[VF610_CLK_DCU0_DIV] = imx_clk_divider("dcu0_div", "dcu0_en", CCM_CSCDR3, 16, 3);
>> - clk[VF610_CLK_DCU0] = imx_clk_gate2("dcu0", "dcu0_div", CCM_CCGR3, CCM_CCGRx_CGn(8));
>> + clk[VF610_CLK_DCU0] = imx_clk_gate2("dcu0", "ipg_bus", CCM_CCGR3, CCM_CCGRx_CGn(8));
>> clk[VF610_CLK_DCU1_SEL] = imx_clk_mux("dcu1_sel", CCM_CSCMR1, 29, 1, dcu_sels, 2);
>> clk[VF610_CLK_DCU1_EN] = imx_clk_gate("dcu1_en", "dcu1_sel", CCM_CSCDR3, 23);
>> clk[VF610_CLK_DCU1_DIV] = imx_clk_divider("dcu1_div", "dcu1_en", CCM_CSCDR3, 20, 3);
>> - clk[VF610_CLK_DCU1] = imx_clk_gate2("dcu1", "dcu1_div", CCM_CCGR9, CCM_CCGRx_CGn(8));
>> + clk[VF610_CLK_DCU1] = imx_clk_gate2("dcu1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(8));
>>
>> clk[VF610_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", CCM_CSCMR1, 20, 2, esai_sels, 4);
>> clk[VF610_CLK_ESAI_EN] = imx_clk_gate("esai_en", "esai_sel", CCM_CSCDR2, 30);
>> --
>> 2.7.4
>>
>>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
