Add atomic mode config funcs. The atomic_commit implementation is a
copy-paste from drm_atomic_helper_commit(), leaving out the async
test. The similar copy-paste implementation appears to be used in many
other drivers too. The standard drm_atomic_helper_check() is used for
checking.
Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
---
drivers/gpu/drm/tilcdc/tilcdc_drv.c | 47 +++++++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
index 709bc90..66a283e 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
@@ -20,6 +20,8 @@
#include <linux/component.h>
#include <linux/pinctrl/consumer.h>
#include <linux/suspend.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
#include "tilcdc_drv.h"
#include "tilcdc_regs.h"
@@ -59,9 +61,54 @@ static void tilcdc_fb_output_poll_changed(struct drm_device *dev)
drm_fbdev_cma_hotplug_event(priv->fbdev);
}
+static int tilcdc_commit(struct drm_device *dev,
+ struct drm_atomic_state *state,
+ bool async)
+{
+ int ret;
+
+ ret = drm_atomic_helper_prepare_planes(dev, state);
+ if (ret)
+ return ret;
+
+ drm_atomic_helper_swap_state(dev, state);
+
+ /*
+ * Everything below can be run asynchronously without the need to grab
+ * any modeset locks at all under one condition: It must be guaranteed
+ * that the asynchronous work has either been cancelled (if the driver
+ * supports it, which at least requires that the framebuffers get
+ * cleaned up with drm_atomic_helper_cleanup_planes()) or completed
+ * before the new state gets committed on the software side with
+ * drm_atomic_helper_swap_state().
+ *
+ * This scheme allows new atomic state updates to be prepared and
+ * checked in parallel to the asynchronous completion of the previous
+ * update. Which is important since compositors need to figure out the
+ * composition of the next frame right after having submitted the
+ * current layout.
+ */
+
+ drm_atomic_helper_commit_modeset_disables(dev, state);
+
+ drm_atomic_helper_commit_planes(dev, state, false);
+
+ drm_atomic_helper_commit_modeset_enables(dev, state);
+
+ drm_atomic_helper_wait_for_vblanks(dev, state);
+
+ drm_atomic_helper_cleanup_planes(dev, state);
+
+ drm_atomic_state_free(state);
+
+ return 0;
+}
+
static const struct drm_mode_config_funcs mode_config_funcs = {
.fb_create = tilcdc_fb_create,
.output_poll_changed = tilcdc_fb_output_poll_changed,
+ .atomic_check = drm_atomic_helper_check,
+ .atomic_commit = tilcdc_commit,
};
static int modeset_init(struct drm_device *dev)
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
