Unlike UDMAP the BCDMA defines the channel TPL levels per channel type.
In UDMAP the number of high and ultra-high channels applies to both tchan
and rchan.
BCDMA defines the TPL per channel types: bchan, tchan and rchan can have
different number of high and ultra-high channels.
In order to support BCDMA channel TPL we need to move the tpl information
as per channel type property for the DMAs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
---
drivers/dma/ti/k3-udma.c | 117 ++++++++++++++++++++++++++-------------
drivers/dma/ti/k3-udma.h | 6 ++
2 files changed, 85 insertions(+), 38 deletions(-)
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index f327d436f8ad..0dc3430fea40 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -146,6 +146,11 @@ struct udma_rx_flush {
dma_addr_t buffer_paddr;
};
+struct udma_tpl {
+ u8 levels;
+ u32 start_idx[3];
+};
+
struct udma_dev {
struct dma_device ddev;
struct device *dev;
@@ -153,8 +158,9 @@ struct udma_dev {
const struct udma_match_data *match_data;
const struct udma_soc_data *soc_data;
- u8 tpl_levels;
- u32 tpl_start_idx[3];
+ struct udma_tpl bchan_tpl;
+ struct udma_tpl tchan_tpl;
+ struct udma_tpl rchan_tpl;
size_t desc_align; /* alignment to use for descriptors */
@@ -1276,10 +1282,10 @@ static struct udma_##res *__udma_reserve_##res(struct udma_dev *ud, \
} else { \
int start; \
\
- if (tpl >= ud->tpl_levels) \
- tpl = ud->tpl_levels - 1; \
+ if (tpl >= ud->res##_tpl.levels) \
+ tpl = ud->res##_tpl.levels - 1; \
\
- start = ud->tpl_start_idx[tpl]; \
+ start = ud->res##_tpl.start_idx[tpl]; \
\
id = find_next_zero_bit(ud->res##_map, ud->res##_cnt, \
start); \
@@ -1292,29 +1298,14 @@ static struct udma_##res *__udma_reserve_##res(struct udma_dev *ud, \
return &ud->res##s[id]; \
}
+UDMA_RESERVE_RESOURCE(bchan);
UDMA_RESERVE_RESOURCE(tchan);
UDMA_RESERVE_RESOURCE(rchan);
-static struct udma_bchan *__bcdma_reserve_bchan(struct udma_dev *ud, int id)
-{
- if (id >= 0) {
- if (test_bit(id, ud->bchan_map)) {
- dev_err(ud->dev, "bchan%d is in use\n", id);
- return ERR_PTR(-ENOENT);
- }
- } else {
- id = find_next_zero_bit(ud->bchan_map, ud->bchan_cnt, 0);
- if (id == ud->bchan_cnt)
- return ERR_PTR(-ENOENT);
- }
-
- set_bit(id, ud->bchan_map);
- return &ud->bchans[id];
-}
-
static int bcdma_get_bchan(struct udma_chan *uc)
{
struct udma_dev *ud = uc->ud;
+ enum udma_tp_level tpl;
if (uc->bchan) {
dev_dbg(ud->dev, "chan%d: already have bchan%d allocated\n",
@@ -1322,7 +1313,16 @@ static int bcdma_get_bchan(struct udma_chan *uc)
return 0;
}
- uc->bchan = __bcdma_reserve_bchan(ud, -1);
+ /*
+ * Use normal channels for peripherals, and highest TPL channel for
+ * mem2mem
+ */
+ if (uc->config.tr_trigger_type)
+ tpl = 0;
+ else
+ tpl = ud->bchan_tpl.levels - 1;
+
+ uc->bchan = __udma_reserve_bchan(ud, tpl, -1);
if (IS_ERR(uc->bchan))
return PTR_ERR(uc->bchan);
@@ -1384,8 +1384,11 @@ static int udma_get_chan_pair(struct udma_chan *uc)
/* Can be optimized, but let's have it like this for now */
end = min(ud->tchan_cnt, ud->rchan_cnt);
- /* Try to use the highest TPL channel pair for MEM_TO_MEM channels */
- chan_id = ud->tpl_start_idx[ud->tpl_levels - 1];
+ /*
+ * Try to use the highest TPL channel pair for MEM_TO_MEM channels
+ * Note: in UDMAP the channel TPL is symmetric between tchan and rchan
+ */
+ chan_id = ud->tchan_tpl.start_idx[ud->tchan_tpl.levels - 1];
for (; chan_id < end; chan_id++) {
if (!test_bit(chan_id, ud->tchan_map) &&
!test_bit(chan_id, ud->rchan_map))
@@ -4036,23 +4039,27 @@ static int udma_setup_resources(struct udma_dev *ud)
cap3 = udma_read(ud->mmrs[MMR_GCFG], 0x2c);
if (of_device_is_compatible(dev->of_node,
"ti,am654-navss-main-udmap")) {
- ud->tpl_levels = 2;
- ud->tpl_start_idx[0] = 8;
+ ud->tchan_tpl.levels = 2;
+ ud->tchan_tpl.start_idx[0] = 8;
} else if (of_device_is_compatible(dev->of_node,
"ti,am654-navss-mcu-udmap")) {
- ud->tpl_levels = 2;
- ud->tpl_start_idx[0] = 2;
+ ud->tchan_tpl.levels = 2;
+ ud->tchan_tpl.start_idx[0] = 2;
} else if (UDMA_CAP3_UCHAN_CNT(cap3)) {
- ud->tpl_levels = 3;
- ud->tpl_start_idx[1] = UDMA_CAP3_UCHAN_CNT(cap3);
- ud->tpl_start_idx[0] = UDMA_CAP3_HCHAN_CNT(cap3);
+ ud->tchan_tpl.levels = 3;
+ ud->tchan_tpl.start_idx[1] = UDMA_CAP3_UCHAN_CNT(cap3);
+ ud->tchan_tpl.start_idx[0] = UDMA_CAP3_HCHAN_CNT(cap3);
} else if (UDMA_CAP3_HCHAN_CNT(cap3)) {
- ud->tpl_levels = 2;
- ud->tpl_start_idx[0] = UDMA_CAP3_HCHAN_CNT(cap3);
+ ud->tchan_tpl.levels = 2;
+ ud->tchan_tpl.start_idx[0] = UDMA_CAP3_HCHAN_CNT(cap3);
} else {
- ud->tpl_levels = 1;
+ ud->tchan_tpl.levels = 1;
}
+ ud->rchan_tpl.levels = ud->tchan_tpl.levels;
+ ud->rchan_tpl.start_idx[0] = ud->tchan_tpl.start_idx[0];
+ ud->rchan_tpl.start_idx[1] = ud->tchan_tpl.start_idx[1];
+
ud->tchan_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->tchan_cnt),
sizeof(unsigned long), GFP_KERNEL);
ud->tchans = devm_kcalloc(dev, ud->tchan_cnt, sizeof(*ud->tchans),
@@ -4174,6 +4181,43 @@ static int bcdma_setup_resources(struct udma_dev *ud)
struct ti_sci_resource *rm_res, irq_res;
struct udma_tisci_rm *tisci_rm = &ud->tisci_rm;
const struct udma_oes_offsets *oes = &ud->soc_data->oes;
+ u32 cap;
+
+ /* Set up the throughput level start indexes */
+ cap = udma_read(ud->mmrs[MMR_GCFG], 0x2c);
+ if (BCDMA_CAP3_UBCHAN_CNT(cap)) {
+ ud->bchan_tpl.levels = 3;
+ ud->bchan_tpl.start_idx[1] = BCDMA_CAP3_UBCHAN_CNT(cap);
+ ud->bchan_tpl.start_idx[0] = BCDMA_CAP3_HBCHAN_CNT(cap);
+ } else if (BCDMA_CAP3_HBCHAN_CNT(cap)) {
+ ud->bchan_tpl.levels = 2;
+ ud->bchan_tpl.start_idx[0] = BCDMA_CAP3_HBCHAN_CNT(cap);
+ } else {
+ ud->bchan_tpl.levels = 1;
+ }
+
+ cap = udma_read(ud->mmrs[MMR_GCFG], 0x30);
+ if (BCDMA_CAP4_URCHAN_CNT(cap)) {
+ ud->rchan_tpl.levels = 3;
+ ud->rchan_tpl.start_idx[1] = BCDMA_CAP4_URCHAN_CNT(cap);
+ ud->rchan_tpl.start_idx[0] = BCDMA_CAP4_HRCHAN_CNT(cap);
+ } else if (BCDMA_CAP4_HRCHAN_CNT(cap)) {
+ ud->rchan_tpl.levels = 2;
+ ud->rchan_tpl.start_idx[0] = BCDMA_CAP4_HRCHAN_CNT(cap);
+ } else {
+ ud->rchan_tpl.levels = 1;
+ }
+
+ if (BCDMA_CAP4_UTCHAN_CNT(cap)) {
+ ud->tchan_tpl.levels = 3;
+ ud->tchan_tpl.start_idx[1] = BCDMA_CAP4_UTCHAN_CNT(cap);
+ ud->tchan_tpl.start_idx[0] = BCDMA_CAP4_HTCHAN_CNT(cap);
+ } else if (BCDMA_CAP4_HTCHAN_CNT(cap)) {
+ ud->tchan_tpl.levels = 2;
+ ud->tchan_tpl.start_idx[0] = BCDMA_CAP4_HTCHAN_CNT(cap);
+ } else {
+ ud->tchan_tpl.levels = 1;
+ }
ud->bchan_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->bchan_cnt),
sizeof(unsigned long), GFP_KERNEL);
@@ -4199,9 +4243,6 @@ static int bcdma_setup_resources(struct udma_dev *ud)
!ud->rflows)
return -ENOMEM;
- /* TPL is not yet supported for BCDMA */
- ud->tpl_levels = 1;
-
/* Get resource ranges from tisci */
for (i = 0; i < RM_RANGE_LAST; i++) {
if (i == RM_RANGE_RFLOW)
diff --git a/drivers/dma/ti/k3-udma.h b/drivers/dma/ti/k3-udma.h
index c97ed5271fd9..3ec38b383b76 100644
--- a/drivers/dma/ti/k3-udma.h
+++ b/drivers/dma/ti/k3-udma.h
@@ -48,6 +48,12 @@
#define BCDMA_CAP2_BCHAN_CNT(val) ((val) & 0x1ff)
#define BCDMA_CAP2_TCHAN_CNT(val) (((val) >> 9) & 0x1ff)
#define BCDMA_CAP2_RCHAN_CNT(val) (((val) >> 18) & 0x1ff)
+#define BCDMA_CAP3_HBCHAN_CNT(val) (((val) >> 14) & 0x1ff)
+#define BCDMA_CAP3_UBCHAN_CNT(val) (((val) >> 23) & 0x1ff)
+#define BCDMA_CAP4_HRCHAN_CNT(val) ((val) & 0xff)
+#define BCDMA_CAP4_URCHAN_CNT(val) (((val) >> 8) & 0xff)
+#define BCDMA_CAP4_HTCHAN_CNT(val) (((val) >> 16) & 0xff)
+#define BCDMA_CAP4_UTCHAN_CNT(val) (((val) >> 24) & 0xff)
/* UDMA_CHAN_RT_CTL_REG */
#define UDMA_CHAN_RT_CTL_EN BIT(31)
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
