Hi, The series have build dependency on ti_sci/soc series (v2): https://lore.kernel.org/lkml/20201008115224.1591-1-peter.ujfalusi@xxxxxx/ Santosh kindly provided immutable branch and tag holding the series: git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git tags/drivers_soc_for_5.11 The unmapped event handling in INTA is already mainline. Changes since v2: - Schema files: - Moved compatible as first property and use const instead of enum for now - Removed #address-cells and #size-cells - am64 PSI-L thread map updated to include all threads as the SoC is public now - glue layer - get the ringacc pointer from udma_dev instead of using OF based lookup - Correct fdq ring ID for rx channel configuration - Fix the glue channel dev setup by adding a new classm but with empty remove callback Changes since v1: - Both DT binding document has been updated to address all comments and suggestions from Rob, all checks are passing on them - included new patch to fix the normal channel start offset when ultra-high capacity channels are available for the UDMA and updated the BCDMA/PKTDMA patches along the same line - Re-arranged the patches for Vinod so that the preparational patches and fixes can be picked up separately (they still have dependency on Santosh's branch): patch 1-5: Fixes and new features for existing devices using UDMA, but the the BCDMA/PKTDMA support is building on top of these. Build dependency on Santosh's branch patch 6: Optional second stage router configuration callback support in core patch 7-9: Per channel coherency support in core and use it in dmatest. patch 10-: Initial AM64 BCDMA and PKTDMA support The DMSS introduced within AM64 as a simplified Data movement engine is built on similar grounds as the K3 NAVSS and UDMAP, but with significant architectural changes. - Rings are built into the DMAs The DMAs no longer use the general purpose ringacc, all rings has been moved inside of the DMAs. The new rings within the DMAs are simplified to be dual directional compared to the uni-directional rings in ringacc. There is no more of a concept of generic purpose rings, all rings are assigned to specific channels or flows. - Per channel coherency support The DMAs use the 'ASEL' bits to select data and configuration fetch path. The ASEL bits are placed at the unused parts of any address field used by the DMAs (pointers to descriptors, addresses in descriptors, ring base addresses). The ASEL is not part of the address (the DMAs can address 48bits). Individual channels can be configured to be coherent (via ACP port) or non coherent individually by configuring the ASEL to appropriate value. - Two different DMAs (well, three actually) PKTDMA Similar to UDMAP channels configured in packet mode. The flow configuration of the channels has changed significantly in a way that each channel have at least one flow assigned at design time and each flow is directly mapped to corresponding ring. When multiple flows are set, the channel can only use the flows within it's assigned range. PKTDMA also introduced multiple tflows which did not existed in UDMAP. BCDMA It has two types of channels: - split channels (tchan/rchan): Similar to UDMAP channels configured in TR mode. - Block copy channels (bchan): Similar to EDMA or traditional DMA channels, they can be used for mem2mem type of transfers or to service peripherals not accessible via PSI-L by using external triggers for the TR. BCDMA channels do not have support for multiple flows With the introduction of the new DMAs (especially the BCDMA) we also need to update the resource manager code to support the second range from sysfw for UDMA channels. The two outstanding change in the series in my view is the handling of the DMAs sideband signal of ASEL to select path to provide coherency or non coherency. The smaller one is the device_router_config callback to allow the configuration of the triggers when BCDMA is servicing a triggering peripheral to solve a chicken-egg situation: The router needs to know the event number to send which in turn depends on the channel we got for servicing the peripheral. Regards, Peter --- Grygorii Strashko (1): soc: ti: k3-ringacc: add AM64 DMA rings support. Peter Ujfalusi (18): dmaengine: ti: k3-udma: Correct normal channel offset when uchan_cnt is not 0 dmaengine: ti: k3-udma: Wait for peer teardown completion if supported dmaengine: ti: k3-udma: Add support for second resource range from sysfw dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings dmaengine: of-dma: Add support for optional router configuration callback dmaengine: Add support for per channel coherency handling dmaengine: doc: client: Update for dmaengine_get_dma_device() usage dmaengine: dmatest: Use dmaengine_get_dma_device dt-bindings: dma: ti: Add document for K3 BCDMA dt-bindings: dma: ti: Add document for K3 PKTDMA dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA dmaengine: ti: k3-psil: Add initial map for AM64 dmaengine: ti: Add support for k3 event routers dmaengine: ti: k3-udma: Initial support for K3 BCDMA dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling dmaengine: ti: k3-udma: Initial support for K3 PKTDMA Vignesh Raghavendra (1): dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA .../devicetree/bindings/dma/ti/k3-bcdma.yaml | 164 ++ .../devicetree/bindings/dma/ti/k3-pktdma.yaml | 172 ++ Documentation/driver-api/dmaengine/client.rst | 4 +- drivers/dma/dmatest.c | 13 +- drivers/dma/of-dma.c | 10 + drivers/dma/ti/Makefile | 3 +- drivers/dma/ti/k3-psil-am64.c | 158 ++ drivers/dma/ti/k3-psil-priv.h | 1 + drivers/dma/ti/k3-psil.c | 1 + drivers/dma/ti/k3-udma-glue.c | 319 ++- drivers/dma/ti/k3-udma-private.c | 45 + drivers/dma/ti/k3-udma.c | 1968 +++++++++++++++-- drivers/dma/ti/k3-udma.h | 28 +- drivers/soc/ti/k3-ringacc.c | 325 ++- include/linux/dma/k3-event-router.h | 16 + include/linux/dma/k3-psil.h | 16 + include/linux/dma/k3-udma-glue.h | 12 + include/linux/dmaengine.h | 14 + include/linux/soc/ti/k3-ringacc.h | 17 + 19 files changed, 3061 insertions(+), 225 deletions(-) create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml create mode 100644 drivers/dma/ti/k3-psil-am64.c create mode 100644 include/linux/dma/k3-event-router.h -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
