Re: [PATCH v7 0/5] Add shared workqueue support for idxd driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 10/7/2020 12:01 AM, Vinod Koul wrote:
On 05-10-20, 08:11, Dave Jiang wrote:

== Background ==
A typical DMA device requires the driver to translate application buffers to hardware addresses,
and a kernel-user transition to notify the hardware of new work. Shared Virtual Addressing (SVA)
allows the processor and device to use the same virtual addresses without requiring software to
translate between the address spaces. ENQCMD is a new instruction on Intel Platforms that allows
user applications to directly notify hardware of new work, much like how doorbells are used in
some hardware, but it carries a payload along with it. ENQCMDS is the supervisor version (ring0)
of ENQCMD.

== ENQCMDS ==
Introduce enqcmds(), a helper funciton that copies an input payload to a 64B aligned
destination and confirms whether the payload was accepted by the device or not.
enqcmds() wraps the new ENQCMDS CPU instruction. The ENQCMDS is a ring 0 CPU instruction that
performs similar to the ENQCMD instruction. Descriptor submission must use ENQCMD(S) for shared
workqueues (swq) on an Intel DSA device.

== Shared WQ support ==
Introduce shared workqueue (swq) support for the idxd driver. The current idxd driver contains
dedicated workqueue (dwq) support only. A dwq accepts descriptors from a MOVDIR64B instruction.
MOVDIR64B is a posted instruction on the PCIe bus, it does not wait for any response from the
device. If the wq is full, submitted descriptors are dropped. A swq utilizes the ENQCMDS in
ring 0, which is a non-posted instruction. The zero flag would be set to 1 if the device rejects
the descriptor or if the wq is full. A swq can be shared between multiple users
(kernel or userspace) due to not having to keep track of the wq full condition for submission.
A swq requires PASID and can only run with SVA support.

== IDXD SVA support ==
Add utilization of PASID to support Shared Virtual Addressing (SVA). With PASID support,
the descriptors can be programmed with host virtual address (HVA) rather than IOVA.
The hardware will work with the IOMMU in fulfilling page requests. With SVA support,
a user app using the char device interface can now submit descriptors without having to pin the
virtual memory range it wants to DMA in its own address space.

The series does not add SVA support for the dmaengine subsystem. That support is coming at a
later time.

Applied, thanks


Thanks Vinod!



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux