Re: [PATCH v7 0/5] Add shared workqueue support for idxd driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05-10-20, 08:11, Dave Jiang wrote:

> == Background ==
> A typical DMA device requires the driver to translate application buffers to hardware addresses,
> and a kernel-user transition to notify the hardware of new work. Shared Virtual Addressing (SVA)
> allows the processor and device to use the same virtual addresses without requiring software to
> translate between the address spaces. ENQCMD is a new instruction on Intel Platforms that allows
> user applications to directly notify hardware of new work, much like how doorbells are used in
> some hardware, but it carries a payload along with it. ENQCMDS is the supervisor version (ring0)
> of ENQCMD.
> 
> == ENQCMDS ==
> Introduce enqcmds(), a helper funciton that copies an input payload to a 64B aligned
> destination and confirms whether the payload was accepted by the device or not.
> enqcmds() wraps the new ENQCMDS CPU instruction. The ENQCMDS is a ring 0 CPU instruction that
> performs similar to the ENQCMD instruction. Descriptor submission must use ENQCMD(S) for shared
> workqueues (swq) on an Intel DSA device. 
> 
> == Shared WQ support ==
> Introduce shared workqueue (swq) support for the idxd driver. The current idxd driver contains
> dedicated workqueue (dwq) support only. A dwq accepts descriptors from a MOVDIR64B instruction.
> MOVDIR64B is a posted instruction on the PCIe bus, it does not wait for any response from the
> device. If the wq is full, submitted descriptors are dropped. A swq utilizes the ENQCMDS in
> ring 0, which is a non-posted instruction. The zero flag would be set to 1 if the device rejects
> the descriptor or if the wq is full. A swq can be shared between multiple users
> (kernel or userspace) due to not having to keep track of the wq full condition for submission.
> A swq requires PASID and can only run with SVA support. 
> 
> == IDXD SVA support ==
> Add utilization of PASID to support Shared Virtual Addressing (SVA). With PASID support,
> the descriptors can be programmed with host virtual address (HVA) rather than IOVA.
> The hardware will work with the IOMMU in fulfilling page requests. With SVA support,
> a user app using the char device interface can now submit descriptors without having to pin the
> virtual memory range it wants to DMA in its own address space. 
> 
> The series does not add SVA support for the dmaengine subsystem. That support is coming at a
> later time.

Applied, thanks

-- 
~Vinod



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux