On 25-08-20, 15:48, Alexandru Ardelean wrote: > The series adds support for reading the DMA bus attributes from the > INTERFACE_DESCRIPTION (0x10) register. > > The first 5 changes are a bit of rework prior to adding the actual > change in patch 6, as things need to be shifted around a bit, to enable > the clock to be enabled earlier, to be able to read the version > register. Not sure what happened, I see two sets of patches in this series, maybe duplicate..? Better to resend a clean version.. Even PW shows 12 patches https://patchwork.kernel.org/project/linux-dmaengine/list/ Thanks > > Changelog v1 -> v2: > * fixed error-exit paths for the clock move patch > i.e. 'dmaengine: axi-dmac: move clock enable earlier' > * fixed error-exit path for patch > 'axi-dmac: wrap channel parameter adjust into function' > * added patch 'dmaengine: axi-dmac: move active_descs list init after device-tree init' > the list of active_descs can be moved a bit lower in the init/probe > > Alexandru Ardelean (6): > dmaengine: axi-dmac: move version read in probe > dmaengine: axi-dmac: move active_descs list init after device-tree > init > dmaengine: axi-dmac: move clock enable earlier > dmaengine: axi-dmac: wrap entire dt parse in a function > dmaengine: axi-dmac: wrap channel parameter adjust into function > dmaengine: axi-dmac: add support for reading bus attributes from > registers > > drivers/dma/dma-axi-dmac.c | 138 ++++++++++++++++++++++++++++--------- > 1 file changed, 107 insertions(+), 31 deletions(-) > > -- > 2.17.1 -- ~Vinod
