[PATCH v4 0/2] Add support for AHB DMA controller on Milbeaut series

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>

The following series adds AHB DMA (HDMAC) controller support on Milbeaut series.
This controller is capable of Mem<->MEM and DEV<->MEM transfer. But only DEV<->MEM
is currently supported.

Changes since v3:
 # Drop unused variables
 # Add controller init instruction

Changes since v2:
 # Spelling mistake fix
 # Bug fix prep_slave - made local copy of sgl

Jassi Brar (2):
  dt-bindings: milbeaut-m10v-hdmac: Add Socionext Milbeaut HDMAC
    bindings
  dmaengine: milbeaut-hdmac: Add HDMAC driver for Milbeaut platforms

 .../bindings/dma/milbeaut-m10v-hdmac.txt      |  32 +
 drivers/dma/Kconfig                           |  10 +
 drivers/dma/Makefile                          |   1 +
 drivers/dma/milbeaut-hdmac.c                  | 581 ++++++++++++++++++
 4 files changed, 624 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
 create mode 100644 drivers/dma/milbeaut-hdmac.c

-- 
2.20.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux