[PATCH v3 0/2] Add support for AXI DMA controller on Milbeaut series

[jassisinghbrar@xxxxxxxxx]

From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>

The following series adds AXI DMA (XDMAC) controller support on Milbeaut series.
This controller is capable of only Mem<->MEM transfers. Number of channels is
configurable {2,4,8}

Changes Since v2:
 # Drop unused variable

Changes Since v1:
  # Spelling mistake fix

Jassi Brar (2):
  dt-bindings: milbeaut-m10v-xdmac: Add Socionext Milbeaut XDMAC
    bindings
  dmaengine: milbeaut-xdmac: Add XDMAC driver for Milbeaut platforms

 .../bindings/dma/milbeaut-m10v-xdmac.txt      |  24 +
 drivers/dma/Kconfig                           |  10 +
 drivers/dma/Makefile                          |   1 +
 drivers/dma/milbeaut-xdmac.c                  | 418 ++++++++++++++++++
 4 files changed, 453 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt
 create mode 100644 drivers/dma/milbeaut-xdmac.c

-- 
2.20.1