Add the eDMA device tree nodes for LS1028A devices Signed-off-by: Peng Ma <peng.ma@xxxxxxx> --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 8116fb3..71b87cb 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -235,6 +235,21 @@ status = "disabled"; }; + edma0: edma@22c0000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x0 0x22c0000 0x0 0x10000>, + <0x0 0x22d0000 0x0 0x10000>, + <0x0 0x22e0000 0x0 0x10000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clockgen 4 1>, + <&clockgen 4 1>; + }; + gpio1: gpio@2300000 { compatible = "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; -- 1.7.1