On Tue, Nov 24, 2015 at 11:20:41AM +0900, Simon Horman wrote:
> In general Renesas hardware is not documented to the extent where the
> relationship between IP blocks on different SoCs can be assumed although
> they may appear to operate the same way. Furthermore the documentation
> typically does not specify a version for individual IP blocks. For these
> reasons a convention of using the SoC name in place of a version and
> providing SoC-specific compat strings has been adopted.
>
> Although not universally liked this convention is used in the bindings for
> most drivers for Renesas hardware. The purpose of this patch is to
> update the Renesas USB DMA Controller driver to follow this convention.
>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
>
> ---
> * r8a7792 (R-Car V2H) is omitted as my reading of the documentation
> is that Renesas USB-DMAC does not exist on that SoC
> * r8a7795 (R-Car H2) is omitted as its unclear to me on the compatibility
> of USB-DMAC that SoC
>
> * Once this has been merged I intend to provide follow-up patches
> to use these new compat strings in the relevant dtsi files.
> ---
> Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
> index 040f365954cc..3bb624e10615 100644
> --- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
> +++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
> @@ -1,7 +1,12 @@
> * Renesas USB DMA Controller Device Tree bindings
>
> Required Properties:
> -- compatible: must contain "renesas,usb-dmac"
> +- compatible: "renesas,usb-dmac-<soctype>", "renesas,usb-dmac" as fallback.
> + Examples with soctypes are:
> + - "renesas,usb-dmac-r8a7790" (R-Car H2)
> + - "renesas,usb-dmac-r8a7791" (R-Car M2-W)
> + - "renesas,usb-dmac-r8a7793" (R-Car M2-N)
> + - "renesas,usb-dmac-r8a7794" (R-Car E2)
Weren't you changing the order of SoC and block names on new bindings?
Either way:
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Rob
> - reg: base address and length of the registers block for the DMAC
> - interrupts: interrupt specifiers for the DMAC, one for each entry in
> interrupt-names.
> @@ -15,7 +20,7 @@ Required Properties:
> Example: R8A7790 (R-Car H2) USB-DMACs
>
> usb_dmac0: dma-controller@e65a0000 {
> - compatible = "renesas,usb-dmac";
> + compatible = "renesas,usb-dmac-r8a7790", "renesas,usb-dmac";
> reg = <0 0xe65a0000 0 0x100>;
> interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
> 0 109 IRQ_TYPE_LEVEL_HIGH>;
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
