On Tue, Jan 20, 2015 at 08:16:14AM +0100, Sascha Hauer wrote: > On Tue, Jan 13, 2015 at 01:09:17PM +0800, Robin Gong wrote: > > Below comments got from Page4724 of Reference Manual of i.mx6q: > > http://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf > > > > --"Static context mode should be used for the first channel called > > after reset to ensure that the all context RAM for that channel is > > initialized during the context SAVE phase when the channel is > > done or yields. Subsequent calls to the same channel or > > different channels may use any of the dynamic context modes. > > This will ensure that all context locations for the bootload > > channel are initialized, and prevent undefined values in context > > RAM from being loaded during the context restore if the > > channel is re-started later" > > > > Unfortunately, the rule was broken by commit(5b28aa319bba96987316425a1131813d87cbab35) > > .This patch just take them back. > > > > Signed-off-by: Robin Gong <b38343@xxxxxxxxxxxxx> > > --- > > drivers/dma/imx-sdma.c | 7 ++++--- > > 1 file changed, 4 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c > > index d0df198..510e463 100644 > > --- a/drivers/dma/imx-sdma.c > > +++ b/drivers/dma/imx-sdma.c > > @@ -1323,6 +1323,10 @@ static void sdma_load_firmware(const struct firmware *fw, void *context) > > sdma_load_script(sdma, ram_code, > > header->ram_code_size, > > addr->ram_code_start_addr); > > + > > + /* Set bits of CONFIG register with given context switching mode */ > > + writel_relaxed(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG); > > + > > You move the CONFIG register initialization to a place which may never > be called. Look at the top of sdma_load_firmware: > > if (!fw) { > dev_info(sdma->dev, "external firmware not found, using ROM firmware\n"); > /* In this case we just use the ROM firmware. */ > return; > } > > Sascha > Yes. I'll move it into sdma_run_channel0. > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
