[PATCH 9/9 v4] ASoC: fsi: Configure DMA slave settings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>

Current FSI driver is assuming that dst_addr/src_addr of DMAEngine
will be set by platform data. But it should be set via
dmaengine_slave_config(). Special thanks to Arnd

Reported-by: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
---
v3 -> v4

 - new patch

 sound/soc/sh/fsi.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index dc28b03..bb20550 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -250,6 +250,7 @@ struct fsi_clk {
 
 struct fsi_priv {
 	void __iomem *base;
+	phys_addr_t phys;
 	struct fsi_master *master;
 
 	struct fsi_stream playback;
@@ -1374,9 +1375,15 @@ static int fsi_dma_probe(struct fsi_priv *fsi, struct fsi_stream *io, struct dev
 		struct dma_slave_config cfg = {};
 		int ret;
 
-		cfg.dst_addr	= 0; /* use default addr */
-		cfg.src_addr	= 0; /* use default addr */
-		cfg.direction	= is_play ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
+		if (is_play) {
+			cfg.dst_addr		= fsi->phys + REG_DODT;
+			cfg.dst_addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES;
+			cfg.direction		= DMA_MEM_TO_DEV;
+		} else {
+			cfg.src_addr		= fsi->phys + REG_DIDT;
+			cfg.src_addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES;
+			cfg.direction		= DMA_DEV_TO_MEM;
+		}
 
 		ret = dmaengine_slave_config(io->chan, &cfg);
 		if (ret < 0) {
@@ -1940,6 +1947,7 @@ static int fsi_probe(struct platform_device *pdev)
 	/* FSI A setting */
 	fsi		= &master->fsia;
 	fsi->base	= master->base;
+	fsi->phys	= res->start;
 	fsi->master	= master;
 	fsi_port_info_init(fsi, &info.port_a);
 	fsi_handler_init(fsi, &info.port_a);
@@ -1952,6 +1960,7 @@ static int fsi_probe(struct platform_device *pdev)
 	/* FSI B setting */
 	fsi		= &master->fsib;
 	fsi->base	= master->base + 0x40;
+	fsi->phys	= res->start + 0x40;
 	fsi->master	= master;
 	fsi_port_info_init(fsi, &info.port_b);
 	fsi_handler_init(fsi, &info.port_b);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux