On Mon, Oct 20, 2014 at 05:08:38PM +0200, Ludovic Desroches wrote:
> Hi Vinod,
>
> On Wed, Oct 15, 2014 at 07:00:04PM +0530, Vinod Koul wrote:
> > On Wed, Oct 01, 2014 at 04:59:23PM +0200, Ludovic Desroches wrote:
> > > New atmel DMA controller known as XDMAC, introduced with SAMA5D4
> > > devices.
> > >
> > > +static int at_xdmac_set_slave_config(struct dma_chan *chan,
> > > + struct dma_slave_config *sconfig)
> > > +{
> > > + struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
> > > +
> > > + atchan->cfg = AT91_XDMAC_DT_PERID(atchan->perid)
> > > + | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
> > > + | AT_XDMAC_CC_MBSIZE_SIXTEEN
> > > + | AT_XDMAC_CC_TYPE_PER_TRAN;
> > > +
> > > + if (sconfig->direction == DMA_DEV_TO_MEM) {
> > > + atchan->cfg |= AT_XDMAC_CC_DAM_INCREMENTED_AM
> > > + | AT_XDMAC_CC_SAM_FIXED_AM
> > > + | AT_XDMAC_CC_DIF(atchan->memif)
> > > + | AT_XDMAC_CC_SIF(atchan->perif)
> > > + | AT_XDMAC_CC_DSYNC_PER2MEM;
> > > + atchan->dwidth = ffs(sconfig->src_addr_width) - 1;
> > > + atchan->cfg |= AT_XDMAC_CC_DWIDTH(atchan->dwidth);
> > > + atchan->cfg |= at_xdmac_csize(sconfig->src_maxburst);
> > > + } else if (sconfig->direction == DMA_MEM_TO_DEV) {
> > > + atchan->cfg |= AT_XDMAC_CC_DAM_FIXED_AM
> > > + | AT_XDMAC_CC_SAM_INCREMENTED_AM
> > > + | AT_XDMAC_CC_DIF(atchan->perif)
> > > + | AT_XDMAC_CC_SIF(atchan->memif)
> > > + | AT_XDMAC_CC_DSYNC_MEM2PER;
> > > + atchan->dwidth = ffs(sconfig->dst_addr_width) - 1;
> > > + atchan->cfg |= AT_XDMAC_CC_DWIDTH(atchan->dwidth);
> > > + atchan->cfg |= at_xdmac_csize(sconfig->dst_maxburst);
> > please store both direction configs and use them based on direction in
> > prep_xxx calls. We will remove the direction here.
> >
>
> Ok so direction will disappear the dma_slave_config structure I assume
> but what is planned for src/dst_addr_width and src/dst_maxburst. If
> slave config looses the direction, there is no sense to have some src
> and dst fields. So where should I get them?
No there is!
So you get both src and dstn fields programmed by client. Then in prep_xxx
calls, based on the direction (which is arg for prep_xxx) we need to to use
either src or dstn fields
HTH
--
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
