On Wed, Oct 01, 2014 at 04:59:23PM +0200, Ludovic Desroches wrote:
> New atmel DMA controller known as XDMAC, introduced with SAMA5D4
> devices.
>
> +
> +static inline u32 at_xdmac_csize(u32 maxburst)
> +{
> + u32 csize;
> +
> + switch (ffs(maxburst) - 1) {
This is pretty odd, I dont see a reason why we can have proper case values
and converted ones. It would have made sense if we use this for conversion
but in case values in quite puzzling
> + case 1:
> + csize = AT_XDMAC_CC_CSIZE_CHK_2;
and looking at values this can be ffs(maxburst) - 1 for valid cases
> + break;
> + case 2:
> + csize = AT_XDMAC_CC_CSIZE_CHK_4;
> + break;
> + case 3:
> + csize = AT_XDMAC_CC_CSIZE_CHK_8;
> + break;
> + case 4:
> + csize = AT_XDMAC_CC_CSIZE_CHK_16;
> + break;
> + default:
> + csize = AT_XDMAC_CC_CSIZE_CHK_1;
why?
> + }
> +
> + return csize;
> +};
> +
> +static unsigned int init_nr_desc_per_channel = 64;
> +module_param(init_nr_desc_per_channel, uint, 0644);
> +MODULE_PARM_DESC(init_nr_desc_per_channel,
> + "initial descriptors per channel (default: 64)");
> +
> +
> +static bool at_xdmac_chan_is_enabled(struct at_xdmac_chan *atchan)
> +{
> + return at_xdmac_chan_read(atchan, AT_XDMAC_GS) & atchan->mask;
> +}
> +
> +static void at_xdmac_off(struct at_xdmac *atxdmac)
> +{
> + at_xdmac_write(atxdmac, AT_XDMAC_GD, -1L);
> +
> + /* Wait that all chans are disabled. */
> + while (at_xdmac_read(atxdmac, AT_XDMAC_GS))
> + cpu_relax();
> +
> + at_xdmac_write(atxdmac, AT_XDMAC_GID, -1L);
> +}
> +
> +/* Call with lock hold. */
> +static void at_xdmac_start_xfer(struct at_xdmac_chan *atchan,
> + struct at_xdmac_desc *first)
> +{
> + struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device);
> + u32 reg;
> +
> + dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, first);
> +
> + if (at_xdmac_chan_is_enabled(atchan))
> + return;
> +
> + /* Set transfer as active to not try to start it again. */
> + first->active_xfer = true;
> +
> + /* Tell xdmac where to get the first descriptor. */
> + reg = AT_XDMAC_CNDA_NDA(first->tx_dma_desc.phys)
> + | AT_XDMAC_CNDA_NDAIF(atchan->memif);
> + at_xdmac_chan_write(atchan, AT_XDMAC_CNDA, reg);
> +
> + /*
> + * When doing memory to memory transfer we need to use the next
> + * descriptor view 2 since some fields of the configuration register
> + * depend on transfer size and src/dest addresses.
> + */
> + if (atchan->cfg & AT_XDMAC_CC_TYPE_PER_TRAN) {
> + reg = AT_XDMAC_CNDC_NDVIEW_NDV1;
> + at_xdmac_chan_write(atchan, AT_XDMAC_CC, atchan->cfg);
> + } else {
> + reg = AT_XDMAC_CNDC_NDVIEW_NDV2;
> + }
> +
> + reg |= AT_XDMAC_CNDC_NDDUP
> + | AT_XDMAC_CNDC_NDSUP
> + | AT_XDMAC_CNDC_NDE;
> + at_xdmac_chan_write(atchan, AT_XDMAC_CNDC, reg);
> +
> + dev_vdbg(chan2dev(&atchan->chan),
> + "%s: XDMAC_CC=0x%08x XDMAC_CNDA=0x%08x, XDMAC_CNDC=0x%08x, "
> + "XDMAC_CSA=0x%08x, XDMAC_CDA=0x%08x, XDMAC_CUBC=0x%08x\n",
multi line prints are not encouraged. You could perhpas do XDMAC CC, CNDC...
and reduce your text size and ignore 80char limit.
> + __func__, at_xdmac_chan_read(atchan, AT_XDMAC_CC),
> + at_xdmac_chan_read(atchan, AT_XDMAC_CNDA),
> + at_xdmac_chan_read(atchan, AT_XDMAC_CNDC),
> + at_xdmac_chan_read(atchan, AT_XDMAC_CSA),
> + at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
> + at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
> +
> + at_xdmac_chan_write(atchan, AT_XDMAC_CID, 0xffffffff);
> + reg = AT_XDMAC_CIE_RBEIE | AT_XDMAC_CIE_WBEIE | AT_XDMAC_CIE_ROIE;
> + /*
> + * There is no end of list when doing cyclic dma, we need to get
> + * an interrupt after each periods.
> + */
> + if (at_xdmac_chan_is_cyclic(atchan))
> + at_xdmac_chan_write(atchan, AT_XDMAC_CIE,
> + reg | AT_XDMAC_CIE_BIE);
> + else
> + at_xdmac_chan_write(atchan, AT_XDMAC_CIE,
> + reg | AT_XDMAC_CIE_LIE);
> + at_xdmac_write(atxdmac, AT_XDMAC_GIE, atchan->mask);
> + dev_vdbg(chan2dev(&atchan->chan),
> + "%s: enable channel (0x%08x)\n", __func__, atchan->mask);
> + wmb();
> + at_xdmac_write(atxdmac, AT_XDMAC_GE, atchan->mask);
> +
> + dev_vdbg(chan2dev(&atchan->chan),
> + "%s: XDMAC_CC=0x%08x XDMAC_CNDA=0x%08x, XDMAC_CNDC=0x%08x, "
> + "XDMAC_CSA=0x%08x, XDMAC_CDA=0x%08x, XDMAC_CUBC=0x%08x\n",
> + __func__, at_xdmac_chan_read(atchan, AT_XDMAC_CC),
> + at_xdmac_chan_read(atchan, AT_XDMAC_CNDA),
> + at_xdmac_chan_read(atchan, AT_XDMAC_CNDC),
> + at_xdmac_chan_read(atchan, AT_XDMAC_CSA),
> + at_xdmac_chan_read(atchan, AT_XDMAC_CDA),
> + at_xdmac_chan_read(atchan, AT_XDMAC_CUBC));
> +
> +}
> +static int at_xdmac_set_slave_config(struct dma_chan *chan,
> + struct dma_slave_config *sconfig)
> +{
> + struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
> +
> + atchan->cfg = AT91_XDMAC_DT_PERID(atchan->perid)
> + | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
> + | AT_XDMAC_CC_MBSIZE_SIXTEEN
> + | AT_XDMAC_CC_TYPE_PER_TRAN;
> +
> + if (sconfig->direction == DMA_DEV_TO_MEM) {
> + atchan->cfg |= AT_XDMAC_CC_DAM_INCREMENTED_AM
> + | AT_XDMAC_CC_SAM_FIXED_AM
> + | AT_XDMAC_CC_DIF(atchan->memif)
> + | AT_XDMAC_CC_SIF(atchan->perif)
> + | AT_XDMAC_CC_DSYNC_PER2MEM;
> + atchan->dwidth = ffs(sconfig->src_addr_width) - 1;
> + atchan->cfg |= AT_XDMAC_CC_DWIDTH(atchan->dwidth);
> + atchan->cfg |= at_xdmac_csize(sconfig->src_maxburst);
> + } else if (sconfig->direction == DMA_MEM_TO_DEV) {
> + atchan->cfg |= AT_XDMAC_CC_DAM_FIXED_AM
> + | AT_XDMAC_CC_SAM_INCREMENTED_AM
> + | AT_XDMAC_CC_DIF(atchan->perif)
> + | AT_XDMAC_CC_SIF(atchan->memif)
> + | AT_XDMAC_CC_DSYNC_MEM2PER;
> + atchan->dwidth = ffs(sconfig->dst_addr_width) - 1;
> + atchan->cfg |= AT_XDMAC_CC_DWIDTH(atchan->dwidth);
> + atchan->cfg |= at_xdmac_csize(sconfig->dst_maxburst);
please store both direction configs and use them based on direction in
prep_xxx calls. We will remove the direction here.
> + } else {
> + return -EINVAL;
> + }
> +
> + /*
> + * Src address and dest addr are needed to configure the link list
> + * descriptor so keep the slave configuration.
> + */
> + memcpy(&atchan->dma_sconfig, sconfig, sizeof(struct dma_slave_config));
> +
> + dev_dbg(chan2dev(chan), "%s: atchan->cfg=0x%08x\n", __func__, atchan->cfg);
> +
> + return 0;
> +}
> +
> +static struct dma_async_tx_descriptor *
> +at_xdmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
> + unsigned int sg_len, enum dma_transfer_direction direction,
> + unsigned long flags, void *context)
> +{
> + struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
> + struct dma_slave_config *sconfig = &atchan->dma_sconfig;
> + struct at_xdmac_desc *first = NULL, *prev = NULL;
> + struct scatterlist *sg;
> + int i;
> +
> + if (!sgl)
> + return NULL;
> +
> + if (!is_slave_direction(direction)) {
> + dev_err(chan2dev(chan), "invalid DMA direction\n");
> + return NULL;
> + }
> +
> + dev_dbg(chan2dev(chan), "%s: sg_len=%d, dir=%s, flags=0x%lx\n",
> + __func__, sg_len,
> + direction == DMA_MEM_TO_DEV ? "to device" : "from device",
> + flags);
> +
> + /* Protect dma_sconfig field that can be modified by set_slave_conf. */
> + spin_lock_bh(&atchan->lock);
> +
> + /* Prepare descriptors. */
> + for_each_sg(sgl, sg, sg_len, i) {
> + struct at_xdmac_desc *desc = NULL;
> + u32 len, mem;
> +
> + len = sg_dma_len(sg);
> + mem = sg_dma_address(sg);
> + if (unlikely(!len)) {
> + dev_err(chan2dev(chan), "sg data length is zero\n");
> + spin_unlock_bh(&atchan->lock);
> + return NULL;
> + }
> + dev_dbg(chan2dev(chan), "%s: * sg%d len=%u, mem=0x%08x\n",
> + __func__, i, len, mem);
> +
> + desc = at_xdmac_get_desc(atchan);
> + if (!desc) {
> + dev_err(chan2dev(chan), "can't get descriptor\n");
> + if (first)
> + list_splice_init(&first->descs_list, &atchan->free_descs_list);
> + spin_unlock_bh(&atchan->lock);
> + return NULL;
> + }
> +
> + /* Linked list descriptor setup. */
> + if (direction == DMA_DEV_TO_MEM) {
> + desc->lld.mbr_sa = sconfig->src_addr;
> + desc->lld.mbr_da = mem;
> + } else {
> + desc->lld.mbr_sa = mem;
> + desc->lld.mbr_da = sconfig->dst_addr;
> + }
> + desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV1 /* next descriptor view */
> + | AT_XDMAC_MBR_UBC_NDEN /* next descriptor dst parameter update */
> + | AT_XDMAC_MBR_UBC_NSEN /* next descriptor src parameter update */
> + | (i == sg_len - 1 ? 0 : AT_XDMAC_MBR_UBC_NDE) /* descriptor fetch */
> + | len / (1 << atchan->dwidth); /* microblock length */
> + dev_dbg(chan2dev(chan),
> + "%s: lld: mbr_sa=0x%08x, mbr_da=0x%08x, mbr_ubc=0x%08x\n",
> + __func__, desc->lld.mbr_sa, desc->lld.mbr_da, desc->lld.mbr_ubc);
> +
> + /* Chain lld. */
> + if (prev) {
> + prev->lld.mbr_nda = desc->tx_dma_desc.phys;
> + dev_dbg(chan2dev(chan),
> + "%s: chain lld: prev=0x%p, mbr_nda=0x%08x\n",
> + __func__, prev, prev->lld.mbr_nda);
> + }
> +
> + prev = desc;
> + if (!first)
> + first = desc;
> +
> + dev_dbg(chan2dev(chan), "%s: add desc 0x%p to descs_list 0x%p\n",
> + __func__, desc, first);
> + list_add_tail(&desc->desc_node, &first->descs_list);
> + }
> +
> + spin_unlock_bh(&atchan->lock);
> +
> + first->tx_dma_desc.cookie = -EBUSY;
why are you init cookie here
> + first->tx_dma_desc.flags = flags;
> + first->xfer_size = sg_len;
> +
> + return &first->tx_dma_desc;
> +}
> +
> +static struct dma_async_tx_descriptor *
> +at_xdmac_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
> + size_t len, unsigned long flags)
> +{
> + struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
> + struct at_xdmac_desc *first = NULL, *prev = NULL;
> + size_t remaining_size = len, xfer_size = 0, ublen;
> + dma_addr_t src_addr = src, dst_addr = dest;
> + u32 dwidth;
> + /*
> + * WARNING: The channel configuration is set here since there is no
> + * dmaengine_slave_config call in this case. Moreover we don't know the
> + * direction, it involves we can't dynamically set the source and dest
> + * interface so we have to use the same one. Only interface 0 allows EBI
> + * access. Hopefully we can access DDR through both ports (at least on
> + * SAMA5D4x), so we can use the same interface for source and dest,
> + * that solves the fact we don't know the direction.
For memcpy why should we need slave_config. The system memory source and
destination width could be assumed to relastic values and then burst sizes
maxed for performance. These values make more sense for periphral where we
have to match up with the periphral
> + */
> + u32 chan_cc = AT_XDMAC_CC_DAM_INCREMENTED_AM
> + | AT_XDMAC_CC_SAM_INCREMENTED_AM
> + | AT_XDMAC_CC_DIF(0)
> + | AT_XDMAC_CC_SIF(0)
> + | AT_XDMAC_CC_MBSIZE_SIXTEEN
> + | AT_XDMAC_CC_TYPE_MEM_TRAN;
> +
> + dev_dbg(chan2dev(chan), "%s: src=0x%08x, dest=0x%08x, len=%d, flags=0x%lx\n",
> + __func__, src, dest, len, flags);
> +
> + if (unlikely(!len))
> + return NULL;
> +
> + /*
> + * Check address alignment to select the greater data width we can use.
> + * Some XDMAC implementations don't provide dword transfer, in this
> + * case selecting dword has the same behavior as selecting word transfers.
> + */
> + if (!((src_addr | dst_addr) & 7)) {
> + dwidth = AT_XDMAC_CC_DWIDTH_DWORD;
> + dev_dbg(chan2dev(chan), "%s: dwidth: double word\n", __func__);
> + } else if (!((src_addr | dst_addr) & 3)) {
> + dwidth = AT_XDMAC_CC_DWIDTH_WORD;
> + dev_dbg(chan2dev(chan), "%s: dwidth: word\n", __func__);
> + } else if (!((src_addr | dst_addr) & 1)) {
> + dwidth = AT_XDMAC_CC_DWIDTH_HALFWORD;
> + dev_dbg(chan2dev(chan), "%s: dwidth: half word\n", __func__);
> + } else {
> + dwidth = AT_XDMAC_CC_DWIDTH_BYTE;
> + dev_dbg(chan2dev(chan), "%s: dwidth: byte\n", __func__);
> + }
> +
> + atchan->cfg = chan_cc | AT_XDMAC_CC_DWIDTH(dwidth);
> +
> + /* Prepare descriptors. */
> + while (remaining_size) {
> + struct at_xdmac_desc *desc = NULL;
> +
> + dev_dbg(chan2dev(chan), "%s: remaining_size=%u\n", __func__, remaining_size);
> +
> + spin_lock_bh(&atchan->lock);
> + desc = at_xdmac_get_desc(atchan);
> + spin_unlock_bh(&atchan->lock);
> + if (!desc) {
> + dev_err(chan2dev(chan), "can't get descriptor\n");
> + if (first)
> + list_splice_init(&first->descs_list, &atchan->free_descs_list);
> + return NULL;
> + }
> +
> + /* Update src and dest addresses. */
> + src_addr += xfer_size;
> + dst_addr += xfer_size;
> +
> + if (remaining_size >= AT_XDMAC_MBR_UBC_UBLEN_MAX << dwidth)
> + xfer_size = AT_XDMAC_MBR_UBC_UBLEN_MAX << dwidth;
> + else
> + xfer_size = remaining_size;
> +
> + dev_dbg(chan2dev(chan), "%s: xfer_size=%u\n", __func__, xfer_size);
> +
> + /* Check remaining length and change data width if needed. */
> + if (!((src_addr | dst_addr | xfer_size) & 7)) {
> + dwidth = AT_XDMAC_CC_DWIDTH_DWORD;
> + dev_dbg(chan2dev(chan), "%s: dwidth: double word\n", __func__);
> + } else if (!((src_addr | dst_addr | xfer_size) & 3)) {
> + dwidth = AT_XDMAC_CC_DWIDTH_WORD;
> + dev_dbg(chan2dev(chan), "%s: dwidth: word\n", __func__);
> + } else if (!((src_addr | dst_addr | xfer_size) & 1)) {
> + dwidth = AT_XDMAC_CC_DWIDTH_HALFWORD;
> + dev_dbg(chan2dev(chan), "%s: dwidth: half word\n", __func__);
> + } else if ((src_addr | dst_addr | xfer_size) & 1) {
> + dwidth = AT_XDMAC_CC_DWIDTH_BYTE;
> + dev_dbg(chan2dev(chan), "%s: dwidth: byte\n", __func__);
> + }
> + chan_cc |= AT_XDMAC_CC_DWIDTH(dwidth);
> +
> + ublen = xfer_size >> dwidth;
> + remaining_size -= xfer_size;
> +
> + desc->lld.mbr_sa = src_addr;
> + desc->lld.mbr_da = dst_addr;
> + desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV2
> + | AT_XDMAC_MBR_UBC_NDEN
> + | AT_XDMAC_MBR_UBC_NSEN
> + | (remaining_size ? AT_XDMAC_MBR_UBC_NDE : 0)
> + | ublen;
> + desc->lld.mbr_cfg = chan_cc;
> +
> + dev_dbg(chan2dev(chan),
> + "%s: lld: mbr_sa=0x%08x, mbr_da=0x%08x, mbr_ubc=0x%08x, mbr_cfg=0x%08x\n",
> + __func__, desc->lld.mbr_sa, desc->lld.mbr_da, desc->lld.mbr_ubc, desc->lld.mbr_cfg);
> +
> + /* Chain lld. */
> + if (prev) {
> + prev->lld.mbr_nda = desc->tx_dma_desc.phys;
> + dev_dbg(chan2dev(chan),
> + "%s: chain lld: prev=0x%p, mbr_nda=0x%08x\n",
> + __func__, prev, prev->lld.mbr_nda);
> + }
> +
> + prev = desc;
> + if (!first)
> + first = desc;
> +
> + dev_dbg(chan2dev(chan), "%s: add desc 0x%p to descs_list 0x%p\n",
> + __func__, desc, first);
> + list_add_tail(&desc->desc_node, &first->descs_list);
> + }
> +
> + first->tx_dma_desc.cookie = -EBUSY;
again..
--
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
