Re: [PATCH 1/7] clk: sunxi: Add post clk divider for factor clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 24, 2014 at 11:35:58PM +0800, Chen-Yu Tsai wrote:
> Hi Maxime, Emilio,
> 
> On Tue, Sep 16, 2014 at 11:57 PM, Maxime Ripard
> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> > Hi Emilio,
> >
> > On Sat, Sep 13, 2014 at 11:43:46AM -0300, Emilio López wrote:
> >> Hi,
> >>
> >> El 06/09/14 a las 07:47, Chen-Yu Tsai escibió:
> >> >Some factor clocks, mostly PLLs, have an extra fixed divider just before
> >> >the clock output. Add an option to the factor clk driver config data to
> >> >specify this divider.
> >> >
> >> >Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
> >> >---
> >> >  drivers/clk/sunxi/clk-factors.c | 3 +++
> >> >  drivers/clk/sunxi/clk-factors.h | 1 +
> >> >  2 files changed, 4 insertions(+)
> >> >
> >> >diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
> >> >index 2057c8a..435111d 100644
> >> >--- a/drivers/clk/sunxi/clk-factors.c
> >> >+++ b/drivers/clk/sunxi/clk-factors.c
> >> >@@ -64,6 +64,9 @@ static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
> >> >     /* Calculate the rate */
> >> >     rate = (parent_rate * (n + config->n_start) * (k + 1) >> p) / (m + 1);
> >> >
> >> >+    if (config->post_div)
> >> >+            rate /= config->post_div;
> >> >+
> >> >     return rate;
> >> >  }
> >> >
> >> >diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h
> >> >index d2d0efa..ce70c65 100644
> >> >--- a/drivers/clk/sunxi/clk-factors.h
> >> >+++ b/drivers/clk/sunxi/clk-factors.h
> >> >@@ -16,6 +16,7 @@ struct clk_factors_config {
> >> >     u8 pshift;
> >> >     u8 pwidth;
> >> >     u8 n_start;
> >> >+    u8 post_div;
> >> >  };
> >> >
> >> >  struct clk_factors {
> >> >
> >>
> >> For the record, I liked your solution on[1] more, as it's in line
> >> with what we're doing on the other sunxi platforms, instead of
> >> adding features in factors to cover for some cases. But it's your
> >> and Maxime's call, as I haven't written any of the sun6i code so
> >> far.
> >
> > No, you still wrote most of the clock support, so your opinion is
> > always valuable (and valued).
> >
> > Thing is, unlike what was done in the sun4i driver where there was a
> > "real" technical issue that was preventing us from using only
> > fixed-factor, we're not in such a case in sun6i (and later,
> > apparently).
> >
> > PLL6 has only one output, which is then directly multiplied by
> > fixed-factors, without any (pre|post)-dividers for any of them.
> >
> > That means that following what you did for the sun4i would just
> > register 3 "dumbs" fixed-factors, that we couldn't reference from DT,
> > or through a cryptic index (which is not even documented in our
> > bindings).
> >
> > I'd be fine either way, I just prefer the solution that has less code
> > and is more explicit.
> 
> What's the verdict on this series?

If Emilio prefers to have a single clock node, fine. But please update
the DT bindings documentation.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux