Re: [PATCH 1/7] clk: sunxi: Add post clk divider for factor clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Maxime, Emilio,

On Tue, Sep 16, 2014 at 11:57 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> Hi Emilio,
>
> On Sat, Sep 13, 2014 at 11:43:46AM -0300, Emilio López wrote:
>> Hi,
>>
>> El 06/09/14 a las 07:47, Chen-Yu Tsai escibió:
>> >Some factor clocks, mostly PLLs, have an extra fixed divider just before
>> >the clock output. Add an option to the factor clk driver config data to
>> >specify this divider.
>> >
>> >Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
>> >---
>> >  drivers/clk/sunxi/clk-factors.c | 3 +++
>> >  drivers/clk/sunxi/clk-factors.h | 1 +
>> >  2 files changed, 4 insertions(+)
>> >
>> >diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
>> >index 2057c8a..435111d 100644
>> >--- a/drivers/clk/sunxi/clk-factors.c
>> >+++ b/drivers/clk/sunxi/clk-factors.c
>> >@@ -64,6 +64,9 @@ static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
>> >     /* Calculate the rate */
>> >     rate = (parent_rate * (n + config->n_start) * (k + 1) >> p) / (m + 1);
>> >
>> >+    if (config->post_div)
>> >+            rate /= config->post_div;
>> >+
>> >     return rate;
>> >  }
>> >
>> >diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h
>> >index d2d0efa..ce70c65 100644
>> >--- a/drivers/clk/sunxi/clk-factors.h
>> >+++ b/drivers/clk/sunxi/clk-factors.h
>> >@@ -16,6 +16,7 @@ struct clk_factors_config {
>> >     u8 pshift;
>> >     u8 pwidth;
>> >     u8 n_start;
>> >+    u8 post_div;
>> >  };
>> >
>> >  struct clk_factors {
>> >
>>
>> For the record, I liked your solution on[1] more, as it's in line
>> with what we're doing on the other sunxi platforms, instead of
>> adding features in factors to cover for some cases. But it's your
>> and Maxime's call, as I haven't written any of the sun6i code so
>> far.
>
> No, you still wrote most of the clock support, so your opinion is
> always valuable (and valued).
>
> Thing is, unlike what was done in the sun4i driver where there was a
> "real" technical issue that was preventing us from using only
> fixed-factor, we're not in such a case in sun6i (and later,
> apparently).
>
> PLL6 has only one output, which is then directly multiplied by
> fixed-factors, without any (pre|post)-dividers for any of them.
>
> That means that following what you did for the sun4i would just
> register 3 "dumbs" fixed-factors, that we couldn't reference from DT,
> or through a cryptic index (which is not even documented in our
> bindings).
>
> I'd be fine either way, I just prefer the solution that has less code
> and is more explicit.

What's the verdict on this series?

ChenYu
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux