This patch adds both normal PM suspend/resume support and runtime PM
support to pl330 DMA engine driver.
The runtime power management for pl330 DMA driver allows gating of AMBA
clock (PDMA) in FSYS clock domain, when the device is not processing any
requests. This is necessary to enter W-AFTR low power mode on Exynos3250.
The driver uses different runtime PM functions than amba bus driver
(drivers/amba/bus.c). Resuming the device may happen in atomic context
(during call device_issue_pending()) so pm_runtime_irq_safe() is used.
During suspend and resume the AMBA bus clock is only disabled/enabled
(not unprepared/prepared) but this is sufficient for gating the clock
and for reducing energy usage.
Suggested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
---
drivers/dma/pl330.c | 69 +++++++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 65 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 4839bfa74a10..8868d8be72fd 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -27,6 +27,7 @@
#include <linux/of.h>
#include <linux/of_dma.h>
#include <linux/err.h>
+#include <linux/pm_runtime.h>
#include "dmaengine.h"
#define PL330_MAX_CHAN 8
@@ -1958,6 +1959,7 @@ static void pl330_tasklet(unsigned long data)
struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
struct dma_pl330_desc *desc, *_dt;
unsigned long flags;
+ bool power_down = false;
spin_lock_irqsave(&pch->lock, flags);
@@ -1972,10 +1974,17 @@ static void pl330_tasklet(unsigned long data)
/* Try to submit a req imm. next to the last completed cookie */
fill_queue(pch);
- /* Make sure the PL330 Channel thread is active */
- spin_lock(&pch->thread->dmac->lock);
- _start(pch->thread);
- spin_unlock(&pch->thread->dmac->lock);
+ if (list_empty(&pch->work_list)) {
+ spin_lock(&pch->thread->dmac->lock);
+ _stop(pch->thread);
+ spin_unlock(&pch->thread->dmac->lock);
+ power_down = true;
+ } else {
+ /* Make sure the PL330 Channel thread is active */
+ spin_lock(&pch->thread->dmac->lock);
+ _start(pch->thread);
+ spin_unlock(&pch->thread->dmac->lock);
+ }
while (!list_empty(&pch->completed_list)) {
dma_async_tx_callback callback;
@@ -1990,6 +1999,12 @@ static void pl330_tasklet(unsigned long data)
if (pch->cyclic) {
desc->status = PREP;
list_move_tail(&desc->node, &pch->work_list);
+ if (power_down) {
+ spin_lock(&pch->thread->dmac->lock);
+ _start(pch->thread);
+ spin_unlock(&pch->thread->dmac->lock);
+ power_down = false;
+ }
} else {
desc->status = FREE;
list_move_tail(&desc->node, &pch->dmac->desc_pool);
@@ -2004,6 +2019,10 @@ static void pl330_tasklet(unsigned long data)
}
}
spin_unlock_irqrestore(&pch->lock, flags);
+
+ /* If work list empty, power down */
+ if (power_down)
+ pm_runtime_put(pch->dmac->ddma.dev);
}
bool pl330_filter(struct dma_chan *chan, void *param)
@@ -2073,6 +2092,7 @@ static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned
switch (cmd) {
case DMA_TERMINATE_ALL:
+ pm_runtime_get_sync(pl330->ddma.dev);
spin_lock_irqsave(&pch->lock, flags);
spin_lock(&pl330->lock);
@@ -2099,10 +2119,14 @@ static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned
dma_cookie_complete(&desc->txd);
}
+ if (!list_empty(&pch->work_list))
+ pm_runtime_put(pl330->ddma.dev);
+
list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
spin_unlock_irqrestore(&pch->lock, flags);
+ pm_runtime_put(pl330->ddma.dev);
break;
case DMA_SLAVE_CONFIG:
slave_config = (struct dma_slave_config *)arg;
@@ -2138,6 +2162,7 @@ static void pl330_free_chan_resources(struct dma_chan *chan)
tasklet_kill(&pch->task);
+ pm_runtime_get_sync(pch->dmac->ddma.dev);
spin_lock_irqsave(&pch->lock, flags);
pl330_release_channel(pch->thread);
@@ -2147,6 +2172,7 @@ static void pl330_free_chan_resources(struct dma_chan *chan)
list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
spin_unlock_irqrestore(&pch->lock, flags);
+ pm_runtime_put(pch->dmac->ddma.dev);
}
static enum dma_status
@@ -2162,6 +2188,15 @@ static void pl330_issue_pending(struct dma_chan *chan)
unsigned long flags;
spin_lock_irqsave(&pch->lock, flags);
+ if (list_empty(&pch->work_list)) {
+ /*
+ * Warn on nothing pending. Empty submitted_list may
+ * break our pm_runtime usage counter as it is
+ * updated on work_list emptiness status.
+ */
+ WARN_ON(list_empty(&pch->submitted_list));
+ pm_runtime_get_sync(pch->dmac->ddma.dev);
+ }
list_splice_tail_init(&pch->submitted_list, &pch->work_list);
spin_unlock_irqrestore(&pch->lock, flags);
@@ -2585,6 +2620,26 @@ static int pl330_dma_device_slave_caps(struct dma_chan *dchan,
return 0;
}
+static int __maybe_unused pl330_suspend(struct device *dev)
+{
+ struct amba_device *pcdev = to_amba_device(dev);
+
+ if (!pm_runtime_suspended(dev))
+ amba_pclk_disable(pcdev);
+ return 0;
+}
+
+static int __maybe_unused pl330_resume(struct device *dev)
+{
+ struct amba_device *pcdev = to_amba_device(dev);
+
+ if (!pm_runtime_suspended(dev))
+ return amba_pclk_enable(pcdev);
+ return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume, NULL);
+
static int
pl330_probe(struct amba_device *adev, const struct amba_id *id)
{
@@ -2738,6 +2793,9 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
pcfg->num_peri, pcfg->num_events);
+ pm_runtime_irq_safe(&adev->dev);
+ pm_runtime_put_noidle(&adev->dev);
+
return 0;
probe_err3:
/* Idle the DMAC */
@@ -2764,6 +2822,8 @@ static int pl330_remove(struct amba_device *adev)
struct pl330_dmac *pl330 = amba_get_drvdata(adev);
struct dma_pl330_chan *pch, *_p;
+ pm_runtime_get_noresume(pl330->ddma.dev);
+
if (adev->dev.of_node)
of_dma_controller_free(adev->dev.of_node);
@@ -2802,6 +2862,7 @@ static struct amba_driver pl330_driver = {
.drv = {
.owner = THIS_MODULE,
.name = "dma-pl330",
+ .pm = &pl330_pm,
},
.id_table = pl330_ids,
.probe = pl330_probe,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
