Hi everyone, This series adds support for the DMA controller found in the Allwinner A23 SoC. It is the same hardware as found in the A31 (sun6i) SoC. In addition to reduced physical channels and endpoints, the controller in the A23 requires an undocumented register to be toggled. That seems to allow memory bus access. This series is based on my earlier "clk: sun6i: Unify AHB1 clock and fix rate calculation" series, which removes the clock muxing calls from the sun6i-dma driver. The default PLL6 pre-divider for AHB1 on the A23 results in an exceedingly high clock rate for AHB1, and the system hangs. Also, on the A23, the dma controller happily works even when AHB1 is clocked from AXI. Patch 1 changes the channel count macros into runtime data binded to the DT compatible strings. It also gets rid of some hardcoded values in the interrupt handler. Patch 2 adds the channel number data for the A23 (sun8i), as well as the undocumented register quirk. Patch 3 adds the dma controller node, and related dma resources, to the DT. Cheers ChenYu Chen-Yu Tsai (3): dmaengine: sun6i: support parameterized compatible strings dmaengine: sun6i: Add support for Allwinner A23 (sun8i) variant ARM: dts: sun8i: Add DMA controller node .../devicetree/bindings/dma/sun6i-dma.txt | 2 +- arch/arm/boot/dts/sun8i-a23.dtsi | 19 ++++ drivers/dma/Kconfig | 4 +- drivers/dma/sun6i-dma.c | 116 ++++++++++++++------- 4 files changed, 103 insertions(+), 38 deletions(-) -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
