Re: DMA engine API issue (was: [PATCH/RFC 0/5] R-Car Gen2 DMAC hardware descriptor list support)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 01, 2014 at 10:51:26AM +0200, Laurent Pinchart wrote:
> I'll take this opportunity to question why we have a separation between 
> tx_submit and issue_pending. What's the rationale for that, especially given 
> that dma_issue_pending_all() might kick in at any point and issue pending 
> transfers for all devices. A driver could thus see its submitted but not 
> issued transactions being issued before it explicitly calls 
> dma_async_issue_pending().

A prepared but not submitted transaction is not a pending transaction.

The split is necessary so that a callback can be attached to the
transaction.  This partially comes from the async-tx API, and also
gets a lot of use with the slave API.

The prepare function allocates the descriptor and does the initial
setup, but does not mark the descriptor as a pending transaction.
It returns the descriptor, and the caller is then free to add a
callback function and data pointer to the descriptor before finally
submitting it.  This sequence must occur in a timely manner as some
DMA engine implementations hold a lock between the prepare and submit
callbacks (Dan explicitly permits this as part of the API.)

> The DMA_PRIVATE capability flag seems to play a role here, but it's far from 
> being clear how that mechanism is supposed to work. This should be documented 
> as well, and any light you could shed on this dark corner of the API would 
> help.

Why do you think that DMA_PRIVATE has a bearing in the callbacks?  It
doesn't.  DMA_PRIVATE is all about channel allocation as I explained
yesterday, and whether the channel is available for async_tx usage.

A channel marked DMA_PRIVATE is not available for async_tx usage at
any moment.  A channel without DMA_PRIVATE is available for async_tx
usage until it is allocated for the slave API - at which point the
generic DMA engine code will mark the channel with DMA_PRIVATE,
thereby taking it away from async_tx API usage.  When the slave API
frees the channel, DMA_PRIVATE will be cleared, making the channel
available for async_tx usage.

So, basically, DMA_PRIVATE set -> async_tx usage not allowed.
DMA_PRIVATE clear -> async_tx usage permitted.  It really is that
simple.

> Similarly, the DMA engine API is split in functions with different
> prefixes (mostly dmaengine_*, dma_async_*, dma_*, and various
> unprefixed niceties such as async_tx_ack or txd_lock. If there's a
> rationale for that (beyond just historical reasons) it should also
> be documented, otherwise a cleanup would help all the confused DMA
> engine users (myself included).

dmaengine_* are generally the interface functions to the DMA engine code,
which have been recently introduced to avoid the multiple levels of
pointer indirection having to be typed in every driver.

dma_async_* are the DMA engine interface functions for the async_tx API.

dma_* predate the dmaengine_* naming, and are probably too generic, so
should probably end up being renamed to dmaengine_*.

txd_* are all about the DMA engine descriptors.

async_tx_* are the higher level async_tx API functions.

-- 
FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up
according to speedtest.net.
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux PCI]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux