On Wed, Jul 23, 2014 at 01:07:43PM +0200, Laurent Pinchart wrote: > > The rsnd_soc_dai_trigger() function takes a spinlock, making the context > > atomic, which regmap doesn't like as it locks a mutex. > > > > It might be possible to fix this by setting the fast_io field in both the > > regmap_config and regmap_bus structures in sound/soc/sh/rcar/gen.c. regmap > > will then use a spinlock instead of a mutex. However, even if I believe that > > change makes sense and should be done, another atomic context issue will > > come from the rcar-dmac driver which allocates memory in the > > prep_dma_cyclic function, called by rsnd_dma_start() from > > rsnd_soc_dai_trigger() with the spinlock help. > > > > What context is the rsnd_soc_dai_trigger() function called in by the alsa > > core ? If it's guaranteed to be a sleepable context, would it make sense to > > replace the rsnd_priv spinlock with a mutex ? > > Answering myself here, that's not an option, as the trigger function is called > in atomic context (replacing the spinlock with a mutex produced a clear BUG) > due to snd_pcm_lib_write1() taking a spinlock. > > Now we have a core issue. On one side there's rsnd_soc_dai_trigger() being > called in atomic context, and on the other side the function ends up calling > dmaengine_prep_dma_cyclic() which needs to allocate memory. To make this more > func the DMA engine API is undocumented and completely silent on whether the > prep functions are allowed to sleep. The question is, who's wrong ? > > Now, if you're tempted to say that I'm wrong by allocating memory with > GFP_KERNEL in the DMA engine driver, please read on first :-) I've tried > replacing GFP_KERNEL with GFP_ATOMIC allocations, and then ran into a problem > more complex to solve. > > The rcar-dmac DMA engine driver uses runtime PM. When not used, the device is > suspended. The driver calls pm_runtime_get_sync() to resume the device, and > needs to do so when a descriptor is submitted. This operation, currently > performed in the tx_submit handler, could be moved to the prep_dma_cyclic or > issue_pending handler, but the three operations are called in a row from > rsnd_dma_start(), itself ultimately called from snd_pcm_lib_write1() with the > spinlock held. This means I have no place in my DMA engine driver where I can > resume the device. > > One could argue that the rcar-dmac driver could use a work queue to handle > power management. That's correct, but the additional complexity, which would > be required in *all* DMA engine drivers, seem too high to me. If we need to go > that way, this is really a task that the DMA engine core should handle. > > Let's start by answering the background question and updating the DMA engine > API documentation once and for good : in which context are drivers allowed to > call the prep, tx_submit and issue_pending functions ? I think this was bought up sometime back and we have cleared that all _prep functions can be invoked in atomic context. This is the reason why we have been pushing folks to use GFP_NOWAIT is memory allocations during prepare. Thanks for pointing out documentation doesn't say so, will send a patch for that. On issue_pending and tx_submit, yes these should be allowed to be called from atomic context too. Lastly, just to clarify the callback invoked after descriptor is complete can also be used to submit new descriptors, so folks are dropping locking before invoking the callback HTH -- ~Vinod -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
