On Thu, Oct 26, 2023 at 07:41:52PM +0200, mwilck@xxxxxxxx wrote: > From: Martin Wilck <mwilck@xxxxxxxx> > > Signed-off-by: Martin Wilck <mwilck@xxxxxxxx> Reviewed-by: Benjamin Marzinski <bmarzins@xxxxxxxxxx> > Cc: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx> > --- > README.md | 30 ++++++++++++++++++++---------- > 1 file changed, 20 insertions(+), 10 deletions(-) > > diff --git a/README.md b/README.md > index b2ed1f2..2fb423b 100644 > --- a/README.md > +++ b/README.md > @@ -273,15 +273,25 @@ To enable ALUA, the following options should be changed: > > NVMe > ==== > -To use Device Mapper/multipath-tools with NVMe devices, > -if the Native NVMe Multipath subsystem is enabled > -( "Y" in `/sys/module/nvme_core/parameters/multipath` ), > -it has to be disabled: > > -`echo "options nvme_core multipath=N" > /etc/modprobe.d/01-nvme_core-mp.conf`, > -regenerate the initramfs (`dracut -f` or `update-initramfs`) and reboot. > +Using dm-multipath with NVMe > +---------------------------- > > -Check that it is disabled(N) with: > -`cat /sys/module/nvme_core/parameters/multipath` > -or > -`systool -m nvme_core -A multipath` > +NVMe multipath is natively supported by the Linux kernel. If for some reason > +you prefer using device mapper multipath with NVMe devices, > +you need to disable native multipathing first: > + > + echo "options nvme_core multipath=N" > /etc/modprobe.d/01-nvme_core-mp.conf > + > +Afterwards, regenerate the initramfs (`dracut -f` or `update-initramfs`) and reboot. > + > +Using multipath-tools with native NVMe multipath > +------------------------------------------------ > + > +If native NVMe multipathing is enabled, you can still use multipath-tools > +for displaying the topology and some other information about native NVMe > +multipath setups. This feature is disabled by default. To enable it, set > +`enable_foreign nvme` in the `defaults` section of `multipath.conf`. > +Commands like `multipath -ll` will then display information about NVMe > +native multipath. This support is read-only; modifying the native multipath > +configuration is not supported. > -- > 2.42.0
