From: Martin Wilck <mwilck@xxxxxxxx> Signed-off-by: Martin Wilck <mwilck@xxxxxxxx> Cc: Xose Vazquez Perez <xose.vazquez@xxxxxxxxx> --- README.md | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) diff --git a/README.md b/README.md index b2ed1f2..2fb423b 100644 --- a/README.md +++ b/README.md @@ -273,15 +273,25 @@ To enable ALUA, the following options should be changed: NVMe ==== -To use Device Mapper/multipath-tools with NVMe devices, -if the Native NVMe Multipath subsystem is enabled -( "Y" in `/sys/module/nvme_core/parameters/multipath` ), -it has to be disabled: -`echo "options nvme_core multipath=N" > /etc/modprobe.d/01-nvme_core-mp.conf`, -regenerate the initramfs (`dracut -f` or `update-initramfs`) and reboot. +Using dm-multipath with NVMe +---------------------------- -Check that it is disabled(N) with: -`cat /sys/module/nvme_core/parameters/multipath` -or -`systool -m nvme_core -A multipath` +NVMe multipath is natively supported by the Linux kernel. If for some reason +you prefer using device mapper multipath with NVMe devices, +you need to disable native multipathing first: + + echo "options nvme_core multipath=N" > /etc/modprobe.d/01-nvme_core-mp.conf + +Afterwards, regenerate the initramfs (`dracut -f` or `update-initramfs`) and reboot. + +Using multipath-tools with native NVMe multipath +------------------------------------------------ + +If native NVMe multipathing is enabled, you can still use multipath-tools +for displaying the topology and some other information about native NVMe +multipath setups. This feature is disabled by default. To enable it, set +`enable_foreign nvme` in the `defaults` section of `multipath.conf`. +Commands like `multipath -ll` will then display information about NVMe +native multipath. This support is read-only; modifying the native multipath +configuration is not supported. -- 2.42.0
