Re: [PATCH v13 1/9] block: Introduce queue limits for copy-offload support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/28/23 03:36, Nitesh Shetty wrote:
> Add device limits as sysfs entries,
>         - copy_offload (RW)
>         - copy_max_bytes (RW)
>         - copy_max_bytes_hw (RO)
> 
> Above limits help to split the copy payload in block layer.
> copy_offload: used for setting copy offload(1) or emulation(0).
> copy_max_bytes: maximum total length of copy in single payload.
> copy_max_bytes_hw: Reflects the device supported maximum limit.
> 
> Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
> Signed-off-by: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
> Signed-off-by: Kanchan Joshi <joshi.k@xxxxxxxxxxx>
> Signed-off-by: Anuj Gupta <anuj20.g@xxxxxxxxxxx>
> ---
>  Documentation/ABI/stable/sysfs-block | 33 +++++++++++++++
>  block/blk-settings.c                 | 24 +++++++++++
>  block/blk-sysfs.c                    | 63 ++++++++++++++++++++++++++++
>  include/linux/blkdev.h               | 12 ++++++
>  include/uapi/linux/fs.h              |  3 ++
>  5 files changed, 135 insertions(+)
> 
> diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block
> index c57e5b7cb532..3c97303f658b 100644
> --- a/Documentation/ABI/stable/sysfs-block
> +++ b/Documentation/ABI/stable/sysfs-block
> @@ -155,6 +155,39 @@ Description:
>  		last zone of the device which may be smaller.
>  
>  
> +What:		/sys/block/<disk>/queue/copy_offload
> +Date:		June 2023
> +Contact:	linux-block@xxxxxxxxxxxxxxx
> +Description:
> +		[RW] When read, this file shows whether offloading copy to a
> +		device is enabled (1) or disabled (0). Writing '0' to this
> +		file will disable offloading copies for this device.
> +		Writing any '1' value will enable this feature. If the device
> +		does not support offloading, then writing 1, will result in an
> +		error.

I am still not convinced that this one is really necessary. copy_max_bytes_hw !=
0 indicates that the devices supports copy offload. And setting copy_max_bytes
to 0 can be used to disable copy offload (which probably should be the default
for now).

> +
> +
> +What:		/sys/block/<disk>/queue/copy_max_bytes
> +Date:		June 2023
> +Contact:	linux-block@xxxxxxxxxxxxxxx
> +Description:
> +		[RW] This is the maximum number of bytes that the block layer
> +		will allow for a copy request. This will is always smaller or

will is -> is

> +		equal to the maximum size allowed by the hardware, indicated by
> +		'copy_max_bytes_hw'. An attempt to set a value higher than
> +		'copy_max_bytes_hw' will truncate this to 'copy_max_bytes_hw'.
> +
> +
> +What:		/sys/block/<disk>/queue/copy_max_bytes_hw

Nit: In keeping with the spirit of attributes like
max_hw_sectors_kb/max_sectors_kb, I would call this one copy_max_hw_bytes.

> +Date:		June 2023
> +Contact:	linux-block@xxxxxxxxxxxxxxx
> +Description:
> +		[RO] This is the maximum number of bytes that the hardware
> +		will allow for single data copy request.
> +		A value of 0 means that the device does not support
> +		copy offload.
> +
> +
>  What:		/sys/block/<disk>/queue/crypto/
>  Date:		February 2022
>  Contact:	linux-block@xxxxxxxxxxxxxxx
> diff --git a/block/blk-settings.c b/block/blk-settings.c
> index 4dd59059b788..738cd3f21259 100644
> --- a/block/blk-settings.c
> +++ b/block/blk-settings.c
> @@ -59,6 +59,8 @@ void blk_set_default_limits(struct queue_limits *lim)
>  	lim->zoned = BLK_ZONED_NONE;
>  	lim->zone_write_granularity = 0;
>  	lim->dma_alignment = 511;
> +	lim->max_copy_sectors_hw = 0;
> +	lim->max_copy_sectors = 0;
>  }
>  
>  /**
> @@ -82,6 +84,8 @@ void blk_set_stacking_limits(struct queue_limits *lim)
>  	lim->max_dev_sectors = UINT_MAX;
>  	lim->max_write_zeroes_sectors = UINT_MAX;
>  	lim->max_zone_append_sectors = UINT_MAX;
> +	lim->max_copy_sectors_hw = UINT_MAX;
> +	lim->max_copy_sectors = UINT_MAX;
>  }
>  EXPORT_SYMBOL(blk_set_stacking_limits);
>  
> @@ -183,6 +187,22 @@ void blk_queue_max_discard_sectors(struct request_queue *q,
>  }
>  EXPORT_SYMBOL(blk_queue_max_discard_sectors);
>  
> +/**
> + * blk_queue_max_copy_sectors_hw - set max sectors for a single copy payload
> + * @q:  the request queue for the device
> + * @max_copy_sectors: maximum number of sectors to copy
> + **/
> +void blk_queue_max_copy_sectors_hw(struct request_queue *q,
> +		unsigned int max_copy_sectors)
> +{
> +	if (max_copy_sectors > (COPY_MAX_BYTES >> SECTOR_SHIFT))
> +		max_copy_sectors = COPY_MAX_BYTES >> SECTOR_SHIFT;
> +
> +	q->limits.max_copy_sectors_hw = max_copy_sectors;
> +	q->limits.max_copy_sectors = max_copy_sectors;
> +}
> +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors_hw);
> +
>  /**
>   * blk_queue_max_secure_erase_sectors - set max sectors for a secure erase
>   * @q:  the request queue for the device
> @@ -578,6 +598,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
>  	t->max_segment_size = min_not_zero(t->max_segment_size,
>  					   b->max_segment_size);
>  
> +	t->max_copy_sectors = min(t->max_copy_sectors, b->max_copy_sectors);
> +	t->max_copy_sectors_hw = min(t->max_copy_sectors_hw,
> +						b->max_copy_sectors_hw);
> +
>  	t->misaligned |= b->misaligned;
>  
>  	alignment = queue_limit_alignment_offset(b, start);
> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> index afc797fb0dfc..43551778d035 100644
> --- a/block/blk-sysfs.c
> +++ b/block/blk-sysfs.c
> @@ -199,6 +199,62 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
>  	return queue_var_show(0, page);
>  }
>  
> +static ssize_t queue_copy_offload_show(struct request_queue *q, char *page)
> +{
> +	return queue_var_show(blk_queue_copy(q), page);
> +}
> +
> +static ssize_t queue_copy_offload_store(struct request_queue *q,
> +				       const char *page, size_t count)
> +{
> +	unsigned long copy_offload;
> +	ssize_t ret = queue_var_store(&copy_offload, page, count);
> +
> +	if (ret < 0)
> +		return ret;
> +
> +	if (copy_offload && !q->limits.max_copy_sectors_hw)
> +		return -EINVAL;
> +
> +	if (copy_offload)
> +		blk_queue_flag_set(QUEUE_FLAG_COPY, q);
> +	else
> +		blk_queue_flag_clear(QUEUE_FLAG_COPY, q);
> +
> +	return count;
> +}

See above. I think we can drop this attribute.

> +
> +static ssize_t queue_copy_max_hw_show(struct request_queue *q, char *page)
> +{
> +	return sprintf(page, "%llu\n", (unsigned long long)
> +			q->limits.max_copy_sectors_hw << SECTOR_SHIFT);
> +}
> +
> +static ssize_t queue_copy_max_show(struct request_queue *q, char *page)
> +{
> +	return sprintf(page, "%llu\n", (unsigned long long)
> +			q->limits.max_copy_sectors << SECTOR_SHIFT);
> +}
> +
> +static ssize_t queue_copy_max_store(struct request_queue *q,
> +				       const char *page, size_t count)
> +{
> +	unsigned long max_copy;
> +	ssize_t ret = queue_var_store(&max_copy, page, count);
> +
> +	if (ret < 0)
> +		return ret;
> +
> +	if (max_copy & (queue_logical_block_size(q) - 1))
> +		return -EINVAL;
> +
> +	max_copy >>= SECTOR_SHIFT;
> +	q->limits.max_copy_sectors = min_t(unsigned int, max_copy,
> +					q->limits.max_copy_sectors_hw);
> +
> +	return count;
> +}
> +
>  static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
>  {
>  	return queue_var_show(0, page);
> @@ -522,6 +578,10 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
>  QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones");
>  QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones");
>  
> +QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload");
> +QUEUE_RO_ENTRY(queue_copy_max_hw, "copy_max_bytes_hw");
> +QUEUE_RW_ENTRY(queue_copy_max, "copy_max_bytes");
> +
>  QUEUE_RW_ENTRY(queue_nomerges, "nomerges");
>  QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity");
>  QUEUE_RW_ENTRY(queue_poll, "io_poll");
> @@ -638,6 +698,9 @@ static struct attribute *queue_attrs[] = {
>  	&queue_discard_max_entry.attr,
>  	&queue_discard_max_hw_entry.attr,
>  	&queue_discard_zeroes_data_entry.attr,
> +	&queue_copy_offload_entry.attr,
> +	&queue_copy_max_hw_entry.attr,
> +	&queue_copy_max_entry.attr,
>  	&queue_write_same_max_entry.attr,
>  	&queue_write_zeroes_max_entry.attr,
>  	&queue_zone_append_max_entry.attr,
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index ed44a997f629..6098665953e6 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -309,6 +309,9 @@ struct queue_limits {
>  	unsigned int		discard_alignment;
>  	unsigned int		zone_write_granularity;
>  
> +	unsigned int		max_copy_sectors_hw;
> +	unsigned int		max_copy_sectors;
> +
>  	unsigned short		max_segments;
>  	unsigned short		max_integrity_segments;
>  	unsigned short		max_discard_segments;
> @@ -554,6 +557,7 @@ struct request_queue {
>  #define QUEUE_FLAG_NOWAIT       29	/* device supports NOWAIT */
>  #define QUEUE_FLAG_SQ_SCHED     30	/* single queue style io dispatch */
>  #define QUEUE_FLAG_SKIP_TAGSET_QUIESCE	31 /* quiesce_tagset skip the queue*/
> +#define QUEUE_FLAG_COPY		32	/* enable/disable device copy offload */
>  
>  #define QUEUE_FLAG_MQ_DEFAULT	((1UL << QUEUE_FLAG_IO_STAT) |		\
>  				 (1UL << QUEUE_FLAG_SAME_COMP) |	\
> @@ -574,6 +578,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
>  	test_bit(QUEUE_FLAG_STABLE_WRITES, &(q)->queue_flags)
>  #define blk_queue_io_stat(q)	test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
>  #define blk_queue_add_random(q)	test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
> +#define blk_queue_copy(q)	test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags)
>  #define blk_queue_zone_resetall(q)	\
>  	test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags)
>  #define blk_queue_dax(q)	test_bit(QUEUE_FLAG_DAX, &(q)->queue_flags)
> @@ -891,6 +896,8 @@ extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int);
>  extern void blk_queue_max_segments(struct request_queue *, unsigned short);
>  extern void blk_queue_max_discard_segments(struct request_queue *,
>  		unsigned short);
> +extern void blk_queue_max_copy_sectors_hw(struct request_queue *q,
> +		unsigned int max_copy_sectors);
>  void blk_queue_max_secure_erase_sectors(struct request_queue *q,
>  		unsigned int max_sectors);
>  extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
> @@ -1210,6 +1217,11 @@ static inline unsigned int bdev_discard_granularity(struct block_device *bdev)
>  	return bdev_get_queue(bdev)->limits.discard_granularity;
>  }
>  
> +static inline unsigned int bdev_max_copy_sectors(struct block_device *bdev)
> +{
> +	return bdev_get_queue(bdev)->limits.max_copy_sectors;
> +}
> +
>  static inline unsigned int
>  bdev_max_secure_erase_sectors(struct block_device *bdev)
>  {
> diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
> index b7b56871029c..dff56813f95a 100644
> --- a/include/uapi/linux/fs.h
> +++ b/include/uapi/linux/fs.h
> @@ -64,6 +64,9 @@ struct fstrim_range {
>  	__u64 minlen;
>  };
>  
> +/* maximum copy offload length, this is set to 128MB based on current testing */
> +#define COPY_MAX_BYTES	(1 << 27)
> +
>  /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
>  #define FILE_DEDUPE_RANGE_SAME		0
>  #define FILE_DEDUPE_RANGE_DIFFERS	1

-- 
Damien Le Moal
Western Digital Research

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel




[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux