Add device limits as sysfs entries,
- copy_offload (RW)
- copy_max_bytes (RW)
- copy_max_bytes_hw (RO)
Above limits help to split the copy payload in block layer.
copy_offload: used for setting copy offload(1) or emulation(0).
copy_max_bytes: maximum total length of copy in single payload.
copy_max_bytes_hw: Reflects the device supported maximum limit.
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Signed-off-by: Nitesh Shetty <nj.shetty@xxxxxxxxxxx>
Signed-off-by: Kanchan Joshi <joshi.k@xxxxxxxxxxx>
Signed-off-by: Anuj Gupta <anuj20.g@xxxxxxxxxxx>
---
Documentation/ABI/stable/sysfs-block | 33 +++++++++++++++
block/blk-settings.c | 24 +++++++++++
block/blk-sysfs.c | 63 ++++++++++++++++++++++++++++
include/linux/blkdev.h | 12 ++++++
include/uapi/linux/fs.h | 3 ++
5 files changed, 135 insertions(+)
diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block
index c57e5b7cb532..3c97303f658b 100644
--- a/Documentation/ABI/stable/sysfs-block
+++ b/Documentation/ABI/stable/sysfs-block
@@ -155,6 +155,39 @@ Description:
last zone of the device which may be smaller.
+What: /sys/block/<disk>/queue/copy_offload
+Date: June 2023
+Contact: linux-block@xxxxxxxxxxxxxxx
+Description:
+ [RW] When read, this file shows whether offloading copy to a
+ device is enabled (1) or disabled (0). Writing '0' to this
+ file will disable offloading copies for this device.
+ Writing any '1' value will enable this feature. If the device
+ does not support offloading, then writing 1, will result in an
+ error.
+
+
+What: /sys/block/<disk>/queue/copy_max_bytes
+Date: June 2023
+Contact: linux-block@xxxxxxxxxxxxxxx
+Description:
+ [RW] This is the maximum number of bytes that the block layer
+ will allow for a copy request. This will is always smaller or
+ equal to the maximum size allowed by the hardware, indicated by
+ 'copy_max_bytes_hw'. An attempt to set a value higher than
+ 'copy_max_bytes_hw' will truncate this to 'copy_max_bytes_hw'.
+
+
+What: /sys/block/<disk>/queue/copy_max_bytes_hw
+Date: June 2023
+Contact: linux-block@xxxxxxxxxxxxxxx
+Description:
+ [RO] This is the maximum number of bytes that the hardware
+ will allow for single data copy request.
+ A value of 0 means that the device does not support
+ copy offload.
+
+
What: /sys/block/<disk>/queue/crypto/
Date: February 2022
Contact: linux-block@xxxxxxxxxxxxxxx
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 4dd59059b788..738cd3f21259 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -59,6 +59,8 @@ void blk_set_default_limits(struct queue_limits *lim)
lim->zoned = BLK_ZONED_NONE;
lim->zone_write_granularity = 0;
lim->dma_alignment = 511;
+ lim->max_copy_sectors_hw = 0;
+ lim->max_copy_sectors = 0;
}
/**
@@ -82,6 +84,8 @@ void blk_set_stacking_limits(struct queue_limits *lim)
lim->max_dev_sectors = UINT_MAX;
lim->max_write_zeroes_sectors = UINT_MAX;
lim->max_zone_append_sectors = UINT_MAX;
+ lim->max_copy_sectors_hw = UINT_MAX;
+ lim->max_copy_sectors = UINT_MAX;
}
EXPORT_SYMBOL(blk_set_stacking_limits);
@@ -183,6 +187,22 @@ void blk_queue_max_discard_sectors(struct request_queue *q,
}
EXPORT_SYMBOL(blk_queue_max_discard_sectors);
+/**
+ * blk_queue_max_copy_sectors_hw - set max sectors for a single copy payload
+ * @q: the request queue for the device
+ * @max_copy_sectors: maximum number of sectors to copy
+ **/
+void blk_queue_max_copy_sectors_hw(struct request_queue *q,
+ unsigned int max_copy_sectors)
+{
+ if (max_copy_sectors > (COPY_MAX_BYTES >> SECTOR_SHIFT))
+ max_copy_sectors = COPY_MAX_BYTES >> SECTOR_SHIFT;
+
+ q->limits.max_copy_sectors_hw = max_copy_sectors;
+ q->limits.max_copy_sectors = max_copy_sectors;
+}
+EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors_hw);
+
/**
* blk_queue_max_secure_erase_sectors - set max sectors for a secure erase
* @q: the request queue for the device
@@ -578,6 +598,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
t->max_segment_size = min_not_zero(t->max_segment_size,
b->max_segment_size);
+ t->max_copy_sectors = min(t->max_copy_sectors, b->max_copy_sectors);
+ t->max_copy_sectors_hw = min(t->max_copy_sectors_hw,
+ b->max_copy_sectors_hw);
+
t->misaligned |= b->misaligned;
alignment = queue_limit_alignment_offset(b, start);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index afc797fb0dfc..43551778d035 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -199,6 +199,62 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
return queue_var_show(0, page);
}
+static ssize_t queue_copy_offload_show(struct request_queue *q, char *page)
+{
+ return queue_var_show(blk_queue_copy(q), page);
+}
+
+static ssize_t queue_copy_offload_store(struct request_queue *q,
+ const char *page, size_t count)
+{
+ unsigned long copy_offload;
+ ssize_t ret = queue_var_store(©_offload, page, count);
+
+ if (ret < 0)
+ return ret;
+
+ if (copy_offload && !q->limits.max_copy_sectors_hw)
+ return -EINVAL;
+
+ if (copy_offload)
+ blk_queue_flag_set(QUEUE_FLAG_COPY, q);
+ else
+ blk_queue_flag_clear(QUEUE_FLAG_COPY, q);
+
+ return count;
+}
+
+static ssize_t queue_copy_max_hw_show(struct request_queue *q, char *page)
+{
+ return sprintf(page, "%llu\n", (unsigned long long)
+ q->limits.max_copy_sectors_hw << SECTOR_SHIFT);
+}
+
+static ssize_t queue_copy_max_show(struct request_queue *q, char *page)
+{
+ return sprintf(page, "%llu\n", (unsigned long long)
+ q->limits.max_copy_sectors << SECTOR_SHIFT);
+}
+
+static ssize_t queue_copy_max_store(struct request_queue *q,
+ const char *page, size_t count)
+{
+ unsigned long max_copy;
+ ssize_t ret = queue_var_store(&max_copy, page, count);
+
+ if (ret < 0)
+ return ret;
+
+ if (max_copy & (queue_logical_block_size(q) - 1))
+ return -EINVAL;
+
+ max_copy >>= SECTOR_SHIFT;
+ q->limits.max_copy_sectors = min_t(unsigned int, max_copy,
+ q->limits.max_copy_sectors_hw);
+
+ return count;
+}
+
static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
{
return queue_var_show(0, page);
@@ -522,6 +578,10 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones");
QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones");
+QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload");
+QUEUE_RO_ENTRY(queue_copy_max_hw, "copy_max_bytes_hw");
+QUEUE_RW_ENTRY(queue_copy_max, "copy_max_bytes");
+
QUEUE_RW_ENTRY(queue_nomerges, "nomerges");
QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity");
QUEUE_RW_ENTRY(queue_poll, "io_poll");
@@ -638,6 +698,9 @@ static struct attribute *queue_attrs[] = {
&queue_discard_max_entry.attr,
&queue_discard_max_hw_entry.attr,
&queue_discard_zeroes_data_entry.attr,
+ &queue_copy_offload_entry.attr,
+ &queue_copy_max_hw_entry.attr,
+ &queue_copy_max_entry.attr,
&queue_write_same_max_entry.attr,
&queue_write_zeroes_max_entry.attr,
&queue_zone_append_max_entry.attr,
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ed44a997f629..6098665953e6 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -309,6 +309,9 @@ struct queue_limits {
unsigned int discard_alignment;
unsigned int zone_write_granularity;
+ unsigned int max_copy_sectors_hw;
+ unsigned int max_copy_sectors;
+
unsigned short max_segments;
unsigned short max_integrity_segments;
unsigned short max_discard_segments;
@@ -554,6 +557,7 @@ struct request_queue {
#define QUEUE_FLAG_NOWAIT 29 /* device supports NOWAIT */
#define QUEUE_FLAG_SQ_SCHED 30 /* single queue style io dispatch */
#define QUEUE_FLAG_SKIP_TAGSET_QUIESCE 31 /* quiesce_tagset skip the queue*/
+#define QUEUE_FLAG_COPY 32 /* enable/disable device copy offload */
#define QUEUE_FLAG_MQ_DEFAULT ((1UL << QUEUE_FLAG_IO_STAT) | \
(1UL << QUEUE_FLAG_SAME_COMP) | \
@@ -574,6 +578,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
test_bit(QUEUE_FLAG_STABLE_WRITES, &(q)->queue_flags)
#define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
#define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
+#define blk_queue_copy(q) test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags)
#define blk_queue_zone_resetall(q) \
test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags)
#define blk_queue_dax(q) test_bit(QUEUE_FLAG_DAX, &(q)->queue_flags)
@@ -891,6 +896,8 @@ extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int);
extern void blk_queue_max_segments(struct request_queue *, unsigned short);
extern void blk_queue_max_discard_segments(struct request_queue *,
unsigned short);
+extern void blk_queue_max_copy_sectors_hw(struct request_queue *q,
+ unsigned int max_copy_sectors);
void blk_queue_max_secure_erase_sectors(struct request_queue *q,
unsigned int max_sectors);
extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
@@ -1210,6 +1217,11 @@ static inline unsigned int bdev_discard_granularity(struct block_device *bdev)
return bdev_get_queue(bdev)->limits.discard_granularity;
}
+static inline unsigned int bdev_max_copy_sectors(struct block_device *bdev)
+{
+ return bdev_get_queue(bdev)->limits.max_copy_sectors;
+}
+
static inline unsigned int
bdev_max_secure_erase_sectors(struct block_device *bdev)
{
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
index b7b56871029c..dff56813f95a 100644
--- a/include/uapi/linux/fs.h
+++ b/include/uapi/linux/fs.h
@@ -64,6 +64,9 @@ struct fstrim_range {
__u64 minlen;
};
+/* maximum copy offload length, this is set to 128MB based on current testing */
+#define COPY_MAX_BYTES (1 << 27)
+
/* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
#define FILE_DEDUPE_RANGE_SAME 0
#define FILE_DEDUPE_RANGE_DIFFERS 1
--
2.35.1.500.gb896f729e2
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel
