On Fri, 24 Sep 2021, Christoph Hellwig wrote:
> On Thu, Sep 23, 2021 at 03:48:27PM -0400, Mikulas Patocka wrote:
> > Hi
> >
> > When running the lvm testsuite, we get a lot of warnings
> > "blk_update_request: operation not supported error, dev loop0, sector 0 op
> > 0x9:(WRITE_ZEROES) flags 0x800800 phys_seg 0 prio class 0". The lvm
> > testsuite puts the loop device on tmpfs and the reason for the warning is
> > that tmpfs supports fallocate, but doesn't support FALLOC_FL_ZERO_RANGE.
> >
> > I've created this patch to silence the warnings.
> >
> > Mikulas
> >
> >
> >
> > From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
> >
> > The loop driver checks for the fallocate method and if it is present, it
> > assumes that the filesystem can do FALLOC_FL_ZERO_RANGE and
> > FALLOC_FL_PUNCH_HOLE requests. However, some filesystems (such as fat, or
> > tmpfs) have the fallocate method, but lack the capability to do
> > FALLOC_FL_ZERO_RANGE and/or FALLOC_FL_PUNCH_HOLE.
> >
> > This results in syslog warnings "blk_update_request: operation not
> > supported error, dev loop0, sector 0 op 0x9:(WRITE_ZEROES) flags 0x800800
> > phys_seg 0 prio class 0"
> >
> > This patch sets RQF_QUIET to silence the warnings.
>
> Doesn't this just paper over the problem? I think we need an
> unsigned int with flag in the file_operations for the supported
> operations for this kind of use.
Do you want this patch?
Mikulas
From: Mikulas Patocka <mpatocka@xxxxxxxxxx>
The loop driver checks for the fallocate method and if it is present, it
assumes that the filesystem can do FALLOC_FL_ZERO_RANGE and
FALLOC_FL_PUNCH_HOLE requests. However, some filesystems (such as fat, or
tmpfs) have the fallocate method, but lack the capability to do
FALLOC_FL_ZERO_RANGE and/or FALLOC_FL_PUNCH_HOLE.
This results in syslog warnings "blk_update_request: operation not
supported error, dev loop0, sector 0 op 0x9:(WRITE_ZEROES) flags 0x800800
phys_seg 0 prio class 0". The error can be reproduced with this command:
"truncate -s 1GiB /tmp/file; losetup /dev/loop0 /tmp/file; blkdiscard -z /dev/loop0"
This patch introduces a field "fallocate_flags" in struct file_operations
that specifies the flags that are supported by the fallocate methods. The
loopback driver will check this field to determine if FALLOC_FL_PUNCH_HOLE
or FALLOC_FL_ZERO_RANGE is supported
Signed-off-by: Mikulas Patocka <mpatocka@xxxxxxxxxx>
Index: linux-2.6/block/fops.c
===================================================================
--- linux-2.6.orig/block/fops.c
+++ linux-2.6/block/fops.c
@@ -628,6 +628,7 @@ const struct file_operations def_blk_fop
.splice_read = generic_file_splice_read,
.splice_write = iter_file_splice_write,
.fallocate = blkdev_fallocate,
+ .fallocate_flags = BLKDEV_FALLOC_FL_SUPPORTED,
};
static __init int blkdev_init(void)
Index: linux-2.6/fs/btrfs/file.c
===================================================================
--- linux-2.6.orig/fs/btrfs/file.c
+++ linux-2.6/fs/btrfs/file.c
@@ -3688,6 +3688,7 @@ const struct file_operations btrfs_file_
.release = btrfs_release_file,
.fsync = btrfs_sync_file,
.fallocate = btrfs_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE | FALLOC_FL_ZERO_RANGE,
.unlocked_ioctl = btrfs_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = btrfs_compat_ioctl,
Index: linux-2.6/fs/ceph/file.c
===================================================================
--- linux-2.6.orig/fs/ceph/file.c
+++ linux-2.6/fs/ceph/file.c
@@ -2492,5 +2492,6 @@ const struct file_operations ceph_file_f
.unlocked_ioctl = ceph_ioctl,
.compat_ioctl = compat_ptr_ioctl,
.fallocate = ceph_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
.copy_file_range = ceph_copy_file_range,
};
Index: linux-2.6/fs/cifs/cifsfs.c
===================================================================
--- linux-2.6.orig/fs/cifs/cifsfs.c
+++ linux-2.6/fs/cifs/cifsfs.c
@@ -1281,6 +1281,7 @@ const struct file_operations cifs_file_o
.remap_file_range = cifs_remap_file_range,
.setlease = cifs_setlease,
.fallocate = cifs_fallocate,
+ .fallocate_flags = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE | FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_INSERT_RANGE,
};
const struct file_operations cifs_file_strict_ops = {
@@ -1301,6 +1302,7 @@ const struct file_operations cifs_file_s
.remap_file_range = cifs_remap_file_range,
.setlease = cifs_setlease,
.fallocate = cifs_fallocate,
+ .fallocate_flags = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE | FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_INSERT_RANGE,
};
const struct file_operations cifs_file_direct_ops = {
@@ -1321,6 +1323,7 @@ const struct file_operations cifs_file_d
.llseek = cifs_llseek,
.setlease = cifs_setlease,
.fallocate = cifs_fallocate,
+ .fallocate_flags = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE | FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_INSERT_RANGE,
};
const struct file_operations cifs_file_nobrl_ops = {
@@ -1339,6 +1342,7 @@ const struct file_operations cifs_file_n
.remap_file_range = cifs_remap_file_range,
.setlease = cifs_setlease,
.fallocate = cifs_fallocate,
+ .fallocate_flags = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE | FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_INSERT_RANGE,
};
const struct file_operations cifs_file_strict_nobrl_ops = {
@@ -1357,6 +1361,7 @@ const struct file_operations cifs_file_s
.remap_file_range = cifs_remap_file_range,
.setlease = cifs_setlease,
.fallocate = cifs_fallocate,
+ .fallocate_flags = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE | FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_INSERT_RANGE,
};
const struct file_operations cifs_file_direct_nobrl_ops = {
@@ -1375,6 +1380,7 @@ const struct file_operations cifs_file_d
.llseek = cifs_llseek,
.setlease = cifs_setlease,
.fallocate = cifs_fallocate,
+ .fallocate_flags = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE | FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_INSERT_RANGE,
};
const struct file_operations cifs_dir_ops = {
Index: linux-2.6/fs/ext4/file.c
===================================================================
--- linux-2.6.orig/fs/ext4/file.c
+++ linux-2.6/fs/ext4/file.c
@@ -929,6 +929,7 @@ const struct file_operations ext4_file_o
.splice_read = generic_file_splice_read,
.splice_write = iter_file_splice_write,
.fallocate = ext4_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE | FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_ZERO_RANGE | FALLOC_FL_INSERT_RANGE,
};
const struct inode_operations ext4_file_inode_operations = {
Index: linux-2.6/fs/f2fs/file.c
===================================================================
--- linux-2.6.orig/fs/f2fs/file.c
+++ linux-2.6/fs/f2fs/file.c
@@ -4499,6 +4499,7 @@ const struct file_operations f2fs_file_o
.flush = f2fs_file_flush,
.fsync = f2fs_sync_file,
.fallocate = f2fs_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE | FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_ZERO_RANGE | FALLOC_FL_INSERT_RANGE,
.unlocked_ioctl = f2fs_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = f2fs_compat_ioctl,
Index: linux-2.6/fs/fat/file.c
===================================================================
--- linux-2.6.orig/fs/fat/file.c
+++ linux-2.6/fs/fat/file.c
@@ -211,6 +211,7 @@ const struct file_operations fat_file_op
.splice_read = generic_file_splice_read,
.splice_write = iter_file_splice_write,
.fallocate = fat_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE,
};
static int fat_cont_expand(struct inode *inode, loff_t size)
Index: linux-2.6/fs/fuse/file.c
===================================================================
--- linux-2.6.orig/fs/fuse/file.c
+++ linux-2.6/fs/fuse/file.c
@@ -3147,6 +3147,7 @@ static const struct file_operations fuse
.compat_ioctl = fuse_file_compat_ioctl,
.poll = fuse_file_poll,
.fallocate = fuse_file_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE | FALLOC_FL_ZERO_RANGE,
.copy_file_range = fuse_copy_file_range,
};
Index: linux-2.6/fs/gfs2/file.c
===================================================================
--- linux-2.6.orig/fs/gfs2/file.c
+++ linux-2.6/fs/gfs2/file.c
@@ -1366,6 +1366,7 @@ const struct file_operations gfs2_file_f
.splice_write = gfs2_file_splice_write,
.setlease = simple_nosetlease,
.fallocate = gfs2_fallocate,
+ .fallocate_flags = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
};
const struct file_operations gfs2_dir_fops = {
Index: linux-2.6/fs/hugetlbfs/inode.c
===================================================================
--- linux-2.6.orig/fs/hugetlbfs/inode.c
+++ linux-2.6/fs/hugetlbfs/inode.c
@@ -1163,6 +1163,7 @@ const struct file_operations hugetlbfs_f
.get_unmapped_area = hugetlb_get_unmapped_area,
.llseek = default_llseek,
.fallocate = hugetlbfs_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
};
static const struct inode_operations hugetlbfs_dir_inode_operations = {
Index: linux-2.6/fs/nfs/nfs4file.c
===================================================================
--- linux-2.6.orig/fs/nfs/nfs4file.c
+++ linux-2.6/fs/nfs/nfs4file.c
@@ -457,6 +457,7 @@ const struct file_operations nfs4_file_o
.copy_file_range = nfs4_copy_file_range,
.llseek = nfs4_file_llseek,
.fallocate = nfs42_fallocate,
+ .fallocate_flags = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
.remap_file_range = nfs42_remap_file_range,
#else
.llseek = nfs_file_llseek,
Index: linux-2.6/fs/ntfs3/file.c
===================================================================
--- linux-2.6.orig/fs/ntfs3/file.c
+++ linux-2.6/fs/ntfs3/file.c
@@ -1246,6 +1246,7 @@ const struct file_operations ntfs_file_o
.fsync = generic_file_fsync,
.splice_write = iter_file_splice_write,
.fallocate = ntfs_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE | FALLOC_FL_COLLAPSE_RANGE,
.release = ntfs_file_release,
};
// clang-format on
Index: linux-2.6/fs/ocfs2/file.c
===================================================================
--- linux-2.6.orig/fs/ocfs2/file.c
+++ linux-2.6/fs/ocfs2/file.c
@@ -2746,6 +2746,7 @@ const struct file_operations ocfs2_fops
.splice_read = generic_file_splice_read,
.splice_write = iter_file_splice_write,
.fallocate = ocfs2_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
.remap_file_range = ocfs2_remap_file_range,
};
@@ -2792,6 +2793,7 @@ const struct file_operations ocfs2_fops_
.splice_read = generic_file_splice_read,
.splice_write = iter_file_splice_write,
.fallocate = ocfs2_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
.remap_file_range = ocfs2_remap_file_range,
};
Index: linux-2.6/fs/overlayfs/file.c
===================================================================
--- linux-2.6.orig/fs/overlayfs/file.c
+++ linux-2.6/fs/overlayfs/file.c
@@ -645,6 +645,7 @@ const struct file_operations ovl_file_op
.fsync = ovl_fsync,
.mmap = ovl_mmap,
.fallocate = ovl_fallocate,
+ .fallocate_flags = FALLOC_FL_SUPPORTED_MASK,
.fadvise = ovl_fadvise,
.flush = ovl_flush,
.splice_read = generic_file_splice_read,
Index: linux-2.6/fs/xfs/xfs_file.c
===================================================================
--- linux-2.6.orig/fs/xfs/xfs_file.c
+++ linux-2.6/fs/xfs/xfs_file.c
@@ -1464,6 +1464,7 @@ const struct file_operations xfs_file_op
.fsync = xfs_file_fsync,
.get_unmapped_area = thp_get_unmapped_area,
.fallocate = xfs_file_fallocate,
+ .fallocate_flags = XFS_FALLOC_FL_SUPPORTED,
.fadvise = xfs_file_fadvise,
.remap_file_range = xfs_file_remap_range,
};
Index: linux-2.6/include/linux/fs.h
===================================================================
--- linux-2.6.orig/include/linux/fs.h
+++ linux-2.6/include/linux/fs.h
@@ -2098,6 +2098,7 @@ struct file_operations {
int (*setlease)(struct file *, long, struct file_lock **, void **);
long (*fallocate)(struct file *file, int mode, loff_t offset,
loff_t len);
+ unsigned fallocate_flags;
void (*show_fdinfo)(struct seq_file *m, struct file *f);
#ifndef CONFIG_MMU
unsigned (*mmap_capabilities)(struct file *);
Index: linux-2.6/ipc/shm.c
===================================================================
--- linux-2.6.orig/ipc/shm.c
+++ linux-2.6/ipc/shm.c
@@ -44,6 +44,7 @@
#include <linux/mount.h>
#include <linux/ipc_namespace.h>
#include <linux/rhashtable.h>
+#include <linux/falloc.h>
#include <linux/uaccess.h>
@@ -558,6 +559,7 @@ static const struct file_operations shm_
.get_unmapped_area = shm_get_unmapped_area,
.llseek = noop_llseek,
.fallocate = shm_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
};
/*
@@ -571,6 +573,7 @@ static const struct file_operations shm_
.get_unmapped_area = shm_get_unmapped_area,
.llseek = noop_llseek,
.fallocate = shm_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
};
bool is_file_shm_hugepages(struct file *file)
Index: linux-2.6/mm/shmem.c
===================================================================
--- linux-2.6.orig/mm/shmem.c
+++ linux-2.6/mm/shmem.c
@@ -3797,6 +3797,7 @@ static const struct file_operations shme
.splice_read = generic_file_splice_read,
.splice_write = iter_file_splice_write,
.fallocate = shmem_fallocate,
+ .fallocate_flags = FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
#endif
};
Index: linux-2.6/drivers/block/loop.c
===================================================================
--- linux-2.6.orig/drivers/block/loop.c
+++ linux-2.6/drivers/block/loop.c
@@ -947,7 +947,9 @@ static void loop_config_discard(struct l
* encryption is enabled, because it may give an attacker
* useful information.
*/
- } else if (!file->f_op->fallocate || lo->lo_encrypt_key_size) {
+ } else if ((file->f_op->fallocate_flags & (FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE)) !=
+ (FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE) ||
+ lo->lo_encrypt_key_size) {
max_discard_sectors = 0;
granularity = 0;
@@ -959,7 +961,10 @@ static void loop_config_discard(struct l
if (max_discard_sectors) {
q->limits.discard_granularity = granularity;
blk_queue_max_discard_sectors(q, max_discard_sectors);
- blk_queue_max_write_zeroes_sectors(q, max_discard_sectors);
+ if (file->f_op->fallocate_flags & FALLOC_FL_ZERO_RANGE)
+ blk_queue_max_write_zeroes_sectors(q, max_discard_sectors);
+ else
+ blk_queue_max_write_zeroes_sectors(q, 0);
blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
} else {
q->limits.discard_granularity = 0;
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/dm-devel
