Re: [PATCH 3/4] scsi_dh_rdac: Adding the match function for rdac device handler

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Mike Snitzer [mailto:snitzer@xxxxxxxxxx]
> Sent: Wednesday, November 02, 2011 10:46 AM
> To: device-mapper development
> Cc: Linux SCSI Mailing list
> Subject: Re:  [PATCH 3/4] scsi_dh_rdac: Adding the match
> function for rdac device handler
> 
> On Wed, Nov 02 2011 at 11:23am -0400,
> Moger, Babu <Babu.Moger@xxxxxxxxxx> wrote:
> 
> > > -----Original Message-----
> > > From: Hannes Reinecke [mailto:hare@xxxxxxx]
> > > Sent: Wednesday, November 02, 2011 2:21 AM
> > > To: dm-devel@xxxxxxxxxx
> > > Subject: Re:  [PATCH 3/4] scsi_dh_rdac: Adding the match
> > > function for rdac device handler
> > >
> > > On 11/01/2011 06:19 PM, Moger, Babu wrote:
> > > > This patch introduces the match function for rdac device handler.
> > > Without this,
> > > > sometimes handler attach fails during the device_add.  The match
> > > function was
> > > > introduced by this patch
> > > > http://www.spinics.net/lists/linux-scsi/msg54284.html
> > > >
> > > > Signed-off-by: Babu Moger<babu.moger@xxxxxxxxxx>
> > > > ---
> > > >
> > > > --- linux/drivers/scsi/device_handler/scsi_dh_rdac.c.orig	2011-
> 10-31
> > > 11:25:44.000000000 -0500
> > > > +++ linux/drivers/scsi/device_handler/scsi_dh_rdac.c	2011-10-31
> > > 11:31:34.000000000 -0500
> > > > @@ -819,6 +819,21 @@ static const struct scsi_dh_devlist rdac
> > > >   	{NULL, NULL},
> > > >   };
> > > >
> > > > +static bool rdac_match(struct scsi_device *sdev)
> > > > +{
> > > > +	int i;
> > > > +
> > > > +	for (i = 0; rdac_dev_list[i].vendor; i++) {
> > > > +		if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor,
> > > > +			strlen(rdac_dev_list[i].vendor))&&
> > > > +		    !strncmp(sdev->model, rdac_dev_list[i].model,
> > > > +			strlen(rdac_dev_list[i].model))) {
> > > > +			return true;
> > > > +		}
> > > > +	}
> > > > +	return false;
> > > > +}
> > > > +
> > > >   static int rdac_bus_attach(struct scsi_device *sdev);
> > > >   static void rdac_bus_detach(struct scsi_device *sdev);
> > > >
> > > > @@ -831,6 +846,7 @@ static struct scsi_device_handler rdac_d
> > > >   	.attach = rdac_bus_attach,
> > > >   	.detach = rdac_bus_detach,
> > > >   	.activate = rdac_activate,
> > > > +	.match = rdac_match,
> > > >   };
> > > >
> > > >   static int rdac_bus_attach(struct scsi_device *sdev)
> > > >
> > > As stated in the other mail, I guess we would need to have a check
> > > if the LUN is in ALUA mode.
> > > And, btw, the _original_ intention was to allow vendor-specific
> > > device_handler to do some better probing, eg querying some
> > > vendor-specific VPD pages.
> > > Especially for RDAC it would make far more sense to query the
> > > existence and format of one of the RDAC-specific VPD pages (eg
> 0xC2,
> > > 0xC4, or 0xC8) and use that for matching.
> > > Then you could do away with the vendor/model array altogether here
> > > and we wouldn't need to update the rdac handler every time a new
> > > array comes out or has been rebranded by some OEM.
> >
> > OK. I will add the check for TPGS. I will send the patches tomorrow.
> > For sending the VPD pages(0xC2, 0xC4 and 0xC8), I think we need be
> little careful here.
> > This includes sending these commands to every possible device in the
> system. That is what we want to avoid.
> > I will investigate more on that. That will be my next set of patches
> independent of this.
> 
> Much appreciated.  I agree with Hannes, ideally we wouldn't need the
> rdac dev_list.

Yes, We would like to remove the dependency on Vendor/product strings.
I will work on that. These current patches will address the current the
Attach issue which I mentioned in the description(PATCH 0/4).
I will resubmit the patches now..

> 
> What about the issue where the appropriate scsi_dh isn't attached
> during
> scan (resulting in boot failures, trespasses, etc)?
> 
> Hannes, I know you had plans for how to address the early scsi_dh
> attachment (and this match() work is a great step forward).  I just
> wanted to touch base with you on what your current vision is on how to
> achieve proper early scsi_dh attachment (and what the remaining TODO
> is).

I am not aware of any other issue at this point. Hannes may know about it.

> 
> Thanks,
> Mike
> 
> --
> dm-devel mailing list
> dm-devel@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/dm-devel

--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel


[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux