Re: do not disable ext4 discards on first discard failure? [was: Re: dm snapshot: ignore discards issued to the snapshot-origin target]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 4 May 2011, Martin K. Petersen wrote:

> >>>>> "Lukas" == Lukas Czerner <lczerner@xxxxxxxxxx> writes:
> 
> I got tired of poking around in sysfs to find the discard topology.
> Here's a patch against lsblk that adds a -D option to present this
> information in a human-readable form:
> 
> # lsblk -D
> NAME                  DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO
> sda                          0        0B       0B         0
> ââsda1                       0        0B       0B         0
> sdb                          0      512B       2G         1
> ââsdb1                       0      512B       2G         1

Very useful indeed!

Thanks!
-Lukas

> 
> 
> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
> 
> diff --git a/misc-utils/lsblk.8 b/misc-utils/lsblk.8
> index 38ff48f..d7d7aa8 100644
> --- a/misc-utils/lsblk.8
> +++ b/misc-utils/lsblk.8
> @@ -29,6 +29,8 @@ Print the SIZE column in bytes rather than in human-readable format.
>  .IP "\fB\-d, \-\-nodeps\fP"
>  Don't print device holders or slaves.  For example "lsblk --nodeps /dev/sda" prints
>  information about the sda device only.
> +.IP "\fB\-D, \-\-discard\fP"
> +Print information about the discard (TRIM, UNMAP) capabilities for each device.
>  .IP "\fB\-e, \-\-exclude \fIlist\fP
>  Exclude the devices specified by a comma-separated \fIlist\fR of major device numbers.
>  Note that RAM disks (major=1) are excluded by default.
> diff --git a/misc-utils/lsblk.c b/misc-utils/lsblk.c
> index 38326d0..671e690 100644
> --- a/misc-utils/lsblk.c
> +++ b/misc-utils/lsblk.c
> @@ -77,6 +77,10 @@ enum {
>  	COL_ROTA,
>  	COL_SCHED,
>  	COL_TYPE,
> +	COL_DALIGN,
> +	COL_DGRAN,
> +	COL_DMAX,
> +	COL_DZERO,
>  
>  	__NCOLUMNS
>  };
> @@ -112,8 +116,11 @@ static struct colinfo infos[__NCOLUMNS] = {
>  	[COL_PHYSEC] = { "PHY-SEC", 7, TT_FL_RIGHT, N_("physical sector size") },
>  	[COL_LOGSEC] = { "LOG-SEC", 7, TT_FL_RIGHT, N_("logical sector size") },
>  	[COL_SCHED]  = { "SCHED",   0.1, 0, N_("I/O scheduler name") },
> -	[COL_TYPE]   = { "TYPE",    4, 0, N_("device type") }
> -
> +	[COL_TYPE]   = { "TYPE",    4, 0, N_("device type") },
> +	[COL_DALIGN] = { "DISC-ALN", 6, TT_FL_RIGHT, N_("discard alignment offset") },
> +	[COL_DGRAN]  = { "DISC-GRAN", 6, TT_FL_RIGHT, N_("discard granularity") },
> +	[COL_DMAX]   = { "DISC-MAX", 6, TT_FL_RIGHT, N_("discard max bytes") },
> +	[COL_DZERO]  = { "DISC-ZERO", 1, TT_FL_RIGHT, N_("discard zeroes data") },
>  };
>  
>  struct lsblk {
> @@ -702,6 +709,33 @@ static void set_tt_data(struct blkdev_cxt *cxt, int col, int id, struct tt_line
>  		if (p)
>  			tt_line_set_data(ln, col, p);
>  		break;
> +	case COL_DALIGN:
> +		p = sysfs_strdup(cxt, "discard_alignment");
> +		if (p)
> +			tt_line_set_data(ln, col, p);
> +		break;
> +	case COL_DGRAN:
> +		p = sysfs_strdup(cxt, "queue/discard_granularity");
> +		if (!lsblk->bytes)
> +			p = size_to_human_string(atoi(p));
> +
> +		if (p)
> +			tt_line_set_data(ln, col, p);
> +		break;
> +	case COL_DMAX:
> +		p = sysfs_strdup(cxt, "queue/discard_max_bytes");
> +
> +		if (!lsblk->bytes)
> +			p = size_to_human_string(atoi(p));
> +
> +		if (p)
> +			tt_line_set_data(ln, col, p);
> +		break;
> +	case COL_DZERO:
> +		p = sysfs_strdup(cxt, "queue/discard_zeroes_data");
> +		if (p)
> +			tt_line_set_data(ln, col, p);
> +		break;
>  	};
>  }
>  
> @@ -930,6 +964,7 @@ static void __attribute__((__noreturn__)) help(FILE *out)
>  		" -a, --all            print all devices\n"
>  		" -b, --bytes          print SIZE in bytes rather than in human readable format\n"
>  		" -d, --nodeps         don't print slaves or holders\n"
> +		" -D, --discard        print discard capabilities\n"
>  		" -e, --exclude <list> exclude devices by major number (default: RAM disks)\n"
>  		" -f, --fs             output info about filesystems\n"
>  		" -h, --help           usage information (this)\n"
> @@ -967,6 +1002,7 @@ int main(int argc, char *argv[])
>  		{ "all",	0, 0, 'a' },
>  		{ "bytes",      0, 0, 'b' },
>  		{ "nodeps",     0, 0, 'd' },
> +		{ "discard",    0, 0, 'D' },
>  		{ "help",	0, 0, 'h' },
>  		{ "output",     1, 0, 'o' },
>  		{ "perms",      0, 0, 'm' },
> @@ -987,7 +1023,7 @@ int main(int argc, char *argv[])
>  	lsblk = &_ls;
>  	memset(lsblk, 0, sizeof(*lsblk));
>  
> -	while((c = getopt_long(argc, argv, "abde:fhlnmo:irt", longopts, NULL)) != -1) {
> +	while((c = getopt_long(argc, argv, "abdDe:fhlnmo:irt", longopts, NULL)) != -1) {
>  		switch(c) {
>  		case 'a':
>  			lsblk->all_devices = 1;
> @@ -998,6 +1034,13 @@ int main(int argc, char *argv[])
>  		case 'd':
>  			lsblk->nodeps = 1;
>  			break;
> +		case 'D':
> +			columns[ncolumns++] = COL_NAME;
> +			columns[ncolumns++] = COL_DALIGN;
> +			columns[ncolumns++] = COL_DGRAN;
> +			columns[ncolumns++] = COL_DMAX;
> +			columns[ncolumns++] = COL_DZERO;
> +			break;
>  		case 'e':
>  			parse_excludes(optarg);
>  			break;
> 

-- 
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel

[Index of Archives]     [DM Crypt]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Packaging]     [Fedora SELinux]     [Yosemite Discussion]     [KDE Users]     [Fedora Docs]

  Powered by Linux