One of your lun seem to have a problem. See these messages below..
Mar 2 12:43:14 rman-ss-03 kernel: scsi 1:0:0:0: rdac: LUN 0 (unowned)
Mar 2 12:43:14 rman-ss-03 kernel: sd 1:0:0:1: rdac: LUN 1 (unowned)
Mar 2 12:43:14 rman-ss-03 kernel: sd 1:0:0:2: rdac: LUN 2 (owned)
Mar 2 12:43:14 rman-ss-03 kernel: scsi 2:0:0:0: rdac: LUN 0 (unowned)
Mar 2 12:43:14 rman-ss-03 kernel: sd 2:0:0:1: rdac: LUN 1 (owned)
Mar 2 12:43:14 rman-ss-03 kernel: sd 2:0:0:2: rdac: LUN 2 (unowned)
Mar 2 12:43:14 rman-ss-03 kernel: rdac: device handler registered
>
Lun 0 is not owned by any of the controllers also it is not claimed
> by sd driver for some reason. Can you find out why that happened..
> Or you can remove Lun 0 and see if issue goes away..
I'm not sure what 1:0:0:0 and 2:0:0:0 are or where they came from. They
show up in lsscsi but there is no sd device assigned to them, obviously.
$ lsscsi
[0:0:32:0] enclosu DP BACKPLANE 1.07 -
[0:2:0:0] disk DELL PERC H700 2.30 /dev/sda
[0:2:1:0] disk DELL PERC H700 2.30 /dev/sdb
[1:0:0:0] disk DELL MD32xx 0770 -
[1:0:0:1] disk DELL MD32xx 0770 /dev/sdc
[1:0:0:2] disk DELL MD32xx 0770 /dev/sdd
[1:0:0:31] disk DELL Universal Xport 0770 /dev/sde
[2:0:0:0] disk DELL MD32xx 0770 -
[2:0:0:1] disk DELL MD32xx 0770 /dev/sdf
[2:0:0:2] disk DELL MD32xx 0770 /dev/sdg
[2:0:0:31] disk DELL Universal Xport 0770 /dev/sdh
[3:0:0:0] cd/dvd TEAC DVD-ROM DV-28SW R.2A /dev/scd0
These LUNs do not exist in the array configuration. I only see LUNs 1,
2, and 31.
The profile saved from my array is here: http://tinypaste.com/73823
I added to /etc/sysctl.conf "dev.scsi.logging_level = 4096" and
rebooted. The new syslog since the boot is here: http://tinypaste.com/5b72b
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
