During one of our testing, we noticed that mode select command sent from the host did not have the lun_table updated.
Problem is root caused to the way lun table is updated. Lun table update was done after the call to blk_rq_map_kern is made. This was causing problem because kernel uses bounce buffer(bio_copy_kern) if the address is not aligned. The command buffer updated after the call(blk_rq_map_kern) was not going on the wire. Moved the code to update the lun_table before the call to fix the problem.
Signed-off-by: Babu Moger <babu.moger@xxxxxxx>
Signed-off-by: Somasundaram Krishnasamy <Somasundaram.Krishnasamy@xxxxxxx>
Signed-off-by: Yanling Qi <Yanling.Qi@xxxxxxx>
---
--- linux-2.6.38-rc4/drivers/scsi/device_handler/scsi_dh_rdac.c.orig 2011-02-11 12:41:27.000000000 -0600
+++ linux-2.6.38-rc4/drivers/scsi/device_handler/scsi_dh_rdac.c 2011-02-11 14:04:23.000000000 -0600
@@ -281,11 +281,13 @@ static struct request *get_rdac_req(stru
}
static struct request *rdac_failover_get(struct scsi_device *sdev,
- struct rdac_dh_data *h)
+ struct rdac_dh_data *h, struct list_head *list)
{
struct request *rq;
struct rdac_mode_common *common;
unsigned data_size;
+ struct rdac_queue_data *qdata;
+ u8 *lun_table;
if (h->ctlr->use_ms10) {
struct rdac_pg_expanded *rdac_pg;
@@ -298,6 +300,7 @@ static struct request *rdac_failover_get
rdac_pg->subpage_code = 0x1;
rdac_pg->page_len[0] = 0x01;
rdac_pg->page_len[1] = 0x28;
+ lun_table = rdac_pg->lun_table;
} else {
struct rdac_pg_legacy *rdac_pg;
@@ -307,11 +310,16 @@ static struct request *rdac_failover_get
common = &rdac_pg->common;
rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER;
rdac_pg->page_len = 0x68;
+ lun_table = rdac_pg->lun_table;
}
common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS;
common->quiescence_timeout = RDAC_QUIESCENCE_TIME;
common->rdac_options = RDAC_FORCED_QUIESENCE;
+ list_for_each_entry(qdata, list, entry) {
+ lun_table[qdata->h->lun] = 0x81;
+ }
+
/* get request for block layer packet command */
rq = get_rdac_req(sdev, &h->ctlr->mode_select, data_size, WRITE);
if (!rq)
@@ -565,7 +573,6 @@ static void send_mode_select(struct work
int err, retry_cnt = RDAC_RETRY_COUNT;
struct rdac_queue_data *tmp, *qdata;
LIST_HEAD(list);
- u8 *lun_table;
spin_lock(&ctlr->ms_lock);
list_splice_init(&ctlr->ms_head, &list);
@@ -573,21 +580,12 @@ static void send_mode_select(struct work
ctlr->ms_sdev = NULL;
spin_unlock(&ctlr->ms_lock);
- if (ctlr->use_ms10)
- lun_table = ctlr->mode_select.expanded.lun_table;
- else
- lun_table = ctlr->mode_select.legacy.lun_table;
-
retry:
err = SCSI_DH_RES_TEMP_UNAVAIL;
- rq = rdac_failover_get(sdev, h);
+ rq = rdac_failover_get(sdev, h, &list);
if (!rq)
goto done;
- list_for_each_entry(qdata, &list, entry) {
- lun_table[qdata->h->lun] = 0x81;
- }
-
RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
"%s MODE_SELECT command",
(char *) h->ctlr->array_name, h->ctlr->index,
--
dm-devel mailing list
dm-devel@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/dm-devel
