Hi, I do present 8 luns to the cluster. For each lun there are 4 ways through the SAN that can be used. Therefore I have devices like /dev/sdaa /dev/sdab and so on. The output of multipath -ll shows some disks with 4 paths, some with three, some only with two. In the output of multipath -ll only disks with three letters are shown e.g. /dev/sda. when I run e.g. /sbin/scsi_id -g -u -s /block/sdaa, then it outputs one of the configured ID's that I already have in /etc/multipath.conf. How can I add these disks to the multipath failover? I'm on SLES10 sp2. regards Sebastian -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
