Dear Philip, Sean and all, First of all I apologize for what I wrote: I recognize that's not clear... However at the moment I cannot reproduce the error because I solved the issue through a workaround and I (stupid) didn't save any log of that. Instead of trying to explain better what I wrote (in a mess!!!), can you explain how to work with dmraid? Is there any official HowTo? Man pages don't give us a step by step procedure and that's what I need now Some info about the machines: HW: IBM x306 - 2 HD 160GB SATA - Adaptec HostRAID ASR (onboard) # dmraid -tay cl->raidtype=1 rd_type=64 cl->raidtype=1 rd_type=64 cl->raidtype=1 rd_type=64 cl->raidtype=1 rd_type=64 asr_: 0 312580096 mirror core 2 131072 nosync 2 /dev/sda 0 /dev/sdb 0 asr_1: 0 71681967 linear /dev/mapper/asr_ 63 asr_2: 0 4096575 linear /dev/mapper/asr_ 71682030 asr_3: 0 236798100 linear /dev/mapper/asr_ 75778605 # dmraid -r cl->raidtype=1 rd_type=64 cl->raidtype=1 rd_type=64 /dev/sda: asr, "asr_", mirror, ok, 312580096 sectors, data@ 0 /dev/sdb: asr, "asr_", mirror, ok, 312580096 sectors, data@ 0 # dmsetup status asr_p1: 0 71681967 linear asr_: 0 312580096 mirror 2 8:0 8:16 2385/2385 1 AA 1 core asr_p3: 0 236798100 linear asr_p2: 0 4096575 linear # dmsetup ls asr_p1 (253, 1) asr_ (253, 0) asr_p3 (253, 3) asr_p2 (253, 2) Let's handle a couple of doubts I have: 1) I need to change an HD which has problems...here the steps I guess from what I read in these days: - halt the machine (ok, ok it's obvious ;-P ) - change the faulty HD - boot - when BIOS starts the RAID manager, enter and rebuild the RAID (1: mirror) - after the rebuilding, everything should be ok. ...is it correct? 2) I have a machine with 2 HD SATA, on the first we have the OS installed (and working!), the second is blank (just added), I want to create a RAID 1 (mirror) of the whole disk: - ... I don't want to guess ;-P I know how to manage grub for booting from the new device, but I'm not sure how to create such device... Any tip is welcome! Cheers and thanks Vega -----Messaggio originale----- Da: dm-devel-bounces@xxxxxxxxxx [mailto:dm-devel-bounces@xxxxxxxxxx] Per conto di Phillip Susi Inviato: lunedì 12 novembre 2007 22.16 A: dm-devel@xxxxxxxxxx; ataraid-list@xxxxxxxxxx Oggetto: Re: - info about dm Luca Berra wrote: >> Anyway, I found a little problematic configuring it manually: I tried to >> install SL5 on a node which was misconfigured: instead of seeing one >> device, it was managing the 2 HD (/dev/sda and /dev/sdb) as 2 separate This is as expected. The hardware is just a sata controller with two disks attached, so that is what the kernel sees. dmraid is used to recognize the bios information on the disk and configure the device mapper driver to create a raid virtual device. >> devices an if I tried to configure them (at install time, via CD or >> network boot) with DM, I got many errors about the RAID table (?ERROR: >> asr: Invalid RAID config table checksum on /dev/sda? or even ?asr: >> Invalid magic number in RAID table; saw 0x0 expected??). I tried to >> reconfigure the RAID card first via BIOS and then trying again to >> configure it via Linux (?dmsetup create ??) but even if it seemed dmsetup create creates a new dm device. Generally this command is for debugging and testing, so you should not use it. It has nothing to do with dmraid other than they are both clients of the device mapper kernel driver. >> working (exit code 0), then querying the device asr_ (i.e. ?dmraid ?r?) >> resulted in errors as reported above?or better, dmraid commands (-r, >> -ay, -tay,?) reported errors, while dmsetup commands (status, ls,?) What where the exact commands and errors the generated? I am also confused because the first thing you said was that the system DID correctly recognize the raid array as /dev/mapper/asr_xxxx. >> 2) Managing disks >> I configured disks in RAID 1 (mirror) but I wonder how to manage this >> RAID; in particular, how can I do for: >> - stopping a device (disk) and put it offline/and viceversa? - >> reconfiguring/rebuilding it (due to broken/faulting HD)? >> At the moment I should change a couple of disks (SMARTD warnings >> reported), but I?m scared about the ?RAID table error?? Currently the only way is to do so in the bios. Some systems the bios will begin rebuilding when you tell it to, and you need to wait for it to finish. On others, it only marks the disk as needing rebuilt and relies on the windows driver to do the rebuilding. Currently dmraid does not perform rebuilding. -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
