The product name does change if the firmware uses 'START_STOP_UNIT' or ALUA... so why are we adding the revision? -----Original Message----- From: dm-devel-bounces@xxxxxxxxxx [mailto:dm-devel-bounces@xxxxxxxxxx] On Behalf Of Hannes Reinecke Sent: Thursday, November 09, 2006 5:10 AM Subject: [PATCH 4/4] [libmultipath] Update hardware table for HPHSV200 According to HP the behaviour of the HSV200 depends on the software release; all revisions smaller or equal to '3000' have active/passive support; all revisions above that have active/active support. Translated it means that the older firmware uses the HP-style 'START_STOP_UNIT' command to switch paths, while the newer firmware supports ALUA. So we should update the hardware tables accordingly. Signed-off-by: Hannes Reinecke <hare@xxxxxxx> --- libmultipath/hwtable.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 48 insertions(+), 1 deletions(-) 19c1285b869bfe42b3605c2fee73bb4b416c4c40 diff --git a/libmultipath/hwtable.c b/libmultipath/hwtable.c index b56c231..8c8699d 100644 --- a/libmultipath/hwtable.c +++ b/libmultipath/hwtable.c @@ -91,7 +91,7 @@ static struct hwentry default_hw[] = { }, { .vendor = "HP", - .product = "(HSV2.*|A6189A)", + .product = "A6189A", .getuid = DEFAULT_GETUID, .getprio = NULL, .features = DEFAULT_FEATURES, @@ -104,6 +104,53 @@ static struct hwentry default_hw[] = { .minio = DEFAULT_MINIO, .checker_name = READSECTOR0, }, + { + .vendor = "HP", + .product = "HSV20.*", + .revision = "[123].*", + .getuid = DEFAULT_GETUID, + .getprio = NULL, + .features = DEFAULT_FEATURES, + .hwhandler = DEFAULT_HWHANDLER, + .selector = DEFAULT_SELECTOR, + .pgpolicy = MULTIBUS, + .pgfailback = FAILBACK_UNDEF, + .rr_weight = RR_WEIGHT_NONE, + .no_path_retry = NO_PATH_RETRY_UNDEF, + .minio = DEFAULT_MINIO, + .checker_name = HP_SW, + }, + { + .vendor = "HP", + .product = "HSV20.*", + .revision = "[^123].*", + .getuid = DEFAULT_GETUID, + .getprio = "/sbin/mpath_prio_alua /dev/%n", + .features = DEFAULT_FEATURES, + .hwhandler = DEFAULT_HWHANDLER, + .selector = DEFAULT_SELECTOR, + .pgpolicy = MULTIBUS, + .pgfailback = -FAILBACK_IMMEDIATE, + .rr_weight = RR_WEIGHT_PRIORITIES, + .no_path_retry = NO_PATH_RETRY_UNDEF, + .minio = DEFAULT_MINIO, + .checker_name = TUR, + }, + { + .vendor = "HP", + .product = "HSV21.*", + .getuid = DEFAULT_GETUID, + .getprio = "/sbin/mpath_prio_alua /dev/%n", + .features = DEFAULT_FEATURES, + .hwhandler = DEFAULT_HWHANDLER, + .selector = DEFAULT_SELECTOR, + .pgpolicy = GROUP_BY_PRIO, + .pgfailback = FAILBACK_UNDEF, + .rr_weight = RR_WEIGHT_NONE, + .no_path_retry = NO_PATH_RETRY_UNDEF, + .minio = DEFAULT_MINIO, + .checker_name = TUR, + }, /* * DDN controller family * -- 1.3.1 --------------040805080108070409060801-- -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel -- dm-devel mailing list dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
