On Fri, 2006-03-10 at 11:59 -0500, Ming Zhang wrote: > u have too many chances here. so hard to blame any one. suggest u to > test it one by one if possible. sorry, typo. should be "too many changes" > > for example, have same box run 2.4 and 2.6, test performance on volume > first before run xfs, and samba. > > ming > > On Wed, 2006-03-08 at 16:49 -0800, Ken Hwang wrote: > > Hi, > > > > I'm not sure I should ask this question here, if this is not the place then > > I apologize. I have a home made NAS with Linux. I use evms to create volume, > > put xfs on top of it, and then use samba to share it with Windows clients. > > When I was using kernel 2.4 with all the needed patches I could get netbench > > 106Mbps with 4 clients, and 95Mbps with 8 clients. Recently I upgraded the > > same hardware to kernel 2.6 (I also upgraded the related application such as > > samba, xfs utility, and dmsetup accordingly). Then I ran netbench again and > > got 80Mbps with 4 clients, 53Mbps with 8 clients. Which drop almost 80% (95 > > vs 53) in 8 clients case. > > > > I then make and mount xfs on another raid5 (which uses the same disk but on > > different partitions) and found it got better performance (95Mbps with 4 > > clients, 85Mbps with 8 clients). In brief: > > xfs volume on raid5 md/md1 on sda6/sdb6/sdc6/sdd6 netbench: 95/85Mbps > > xfs volume on EVMS volume /dev/evms/volume1 on raid5 md/md3 on > > sda8/sdb8/sdc8/sdd8: 80/53Mbps > > > > Do you think the slow down (85 to 53Mbps) was caused by device mapper? > > Please advice. > > > > Ken > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.1.375 / Virus Database: 268.2.0/276 - Release Date: 3/7/2006 > > > > -- > > > > dm-devel@xxxxxxxxxx > > https://www.redhat.com/mailman/listinfo/dm-devel > -- dm-devel@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/dm-devel
