Hello, I've got the same kind of problem, except that I'm trying to use RAID 1 (on Fedora Core 4) dmraid 1.0.0.rc8 device-mapper 1.01.02 grub 0.95 # dmraid --debug --verbose -ay DEBUG: _find_set: searching isw_ciehjjjfgd DEBUG: _find_set: not found isw_ciehjjjfgd ERROR: isw: volume Raid-HD0_2 is broken DEBUG: _find_set: searching isw_ciehjjjfgd DEBUG: _find_set: found isw_ciehjjjfgd ERROR: isw: volume Raid-HD0_2 is broken DEBUG: set status of set "isw_ciehjjjfgd" to 16 INFO: Activating GROUP RAID set "isw_ciehjjjfgd" DEBUG: freeing devices of RAID set "isw_ciehjjjfgd" DEBUG: freeing device "isw_ciehjjjfgd", path "/dev/sda" DEBUG: freeing device "isw_ciehjjjfgd", path "/dev/sdc" Please find attached my "dmraid -rD" ... The second disk of the array (sdc) has been unplungged and then re-plugged before the problem happened... Raid array status is displayed as "REBUILD" during boot process. Thanks in advance for your help, Alex > Chandler, > > please send me the files "dmraid -rD" writes (*.dat, *.size, *.offset) > in a bzip2'ed tarball named isw-Chandler_Garruth.tar.bz2 for > investigation. > > Regards, > Heinz > > On Wed, Jul 06, 2005 at 04:59:48PM -0400, Chandler Carruth wrote: > > Hello, > > > > I am attempting to install Gentoo Linux on a box with a RAID0 Array. > > This is a brand new box, with Intel's ICH7 chipset, and accompanying > > fake-RAID chip. The RAID array works in Windows, but despite all my > > attempts, I cannot get it working in Linux. I am now using a LiveCD > > designed specifically to run on boxes with fake-RAID arrays. The various > > software versions are: > > > > * Grub 0.96 > > * device-mapper version 1.00.19 > > * dmraid version 1.0.0.rc6 > > > > This is the most recent version I have been able to find. I am > > attempting to compile a binary of dmraid version 1.0.0.rc8, but I am > > doubtful about this solving the problem. Any ideas would be welcome. =] > > > > # dmraid --debug --verbose -ay > > DEBUG: _find_set: searching isw_bhibhdiifc > > DEBUG: _find_set: not found isw_bhibhdiifc > > ERROR: isw: volume ARRAY is broken > > DEBUG: _find_set: searching isw_bhibhdiifc > > DEBUG: _find_set: found isw_bhibhdiifc > > ERROR: isw: volume ARRAY is broken > > DEBUG : set status of set "isw_bhibhdiifc" to 16 > > INFO: Activating GROUP RAID set "isw_bhibhdiifc" > > DEBUG: freeing devices of RAID set "isw_bhibhdiifc" > > DEBUG: freeing device "isw_bhibhdiifc", path "/dev/sda" > > DEBUG: freeing device "isw_bhibhdiifc", path "/dev/sda" > > > > Please, any idea as to how to setup this RAID array?
Attachment:
isw-Alexandre_Berge.tar.bz2
Description: isw-Alexandre_Berge.tar.bz2