I just thought I would give a quick update on what I have been doing in case anyone can give me more/better direction. I incorporated the (sector_t) cast and I also changed stripe_width to sector_t since my individual devices are bigger than 2TB. I took lvm out of the equation by using dmsetup and striping together my devices. Then I created and mounted and XFS filesystem directly on /dev/dm-0 This still caused corruption. I have compiled hashdd with largefile support and am now letting it run directly on /dev/dm-0. The write finished last night and I am running the read pass now (man it takes a long time to to write and verify 4+TB) I have also been putting some debug statements in stripe_map() but this hasn't shown me anything useful yet. Joe Quoting Jens Beyer <jbe@xxxxxxxxxxx>: > > Hi, > > On Thu, Jan 20, 2005 at 05:59:00PM +0000, Alasdair G Kergon wrote: > > On Thu, Jan 20, 2005 at 09:06:44AM -0500, Randall A. Jones wrote: > > > To verify, this corruption you are seeing only happens when you have a > > > LV larger than 2TB > > > and when you use striping specifically with lvcreate -i. > > > Has anyone experienced data corruption with >2TB LV and no striping? > > > > Does this patch help? > > > > No, it doesn't. I just checked multiple times in different setups. > To address the 'chunksize' Problem mentioned i used lvcreate -i 3 -I 256 . > > Jens > > > > > > Missing cast causing data corruption on devices with stripes > ~1TB. > > --- diff/drivers/md/dm-stripe.c 2005-01-20 17:32:37.000000000 +0000 > > +++ source/drivers/md/dm-stripe.c 2005-01-20 17:32:26.000000000 +0000 > > @@ -179,7 +179,7 @@ > > > > bio->bi_bdev = sc->stripe[stripe].dev->bdev; > > bio->bi_sector = sc->stripe[stripe].physical_start + > > - (chunk << sc->chunk_shift) + (offset & sc->chunk_mask); > > + ((sector_t) chunk << sc->chunk_shift) + (offset & sc->chunk_mask); > > return 1; > > } > > > > > > > -- > Nur tote Fische schwimmen mit dem Strom > > _______________________________________________ > linux-lvm mailing list > linux-lvm@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ >